TS3USB31E
- VCC Operation 2.25 V to 4.3 V
- 1.8-V Compatible Control-Pin Inputs
- IOFF Supports Partial Power-Down Mode Operation
- ron = 10 Ω Maximum
- Δron <0.35 Ω Typical
- Cio(ON) = 6 pF Typical
- Low Power Consumption (1 µA Maximum)
- ESD Performance Tested Per JESD 22
- 8000-V Human-Body Model
(A114-B, Class II) - 1000-V Charged-Device Model (C101)
- 250-V Machine Model (A115-A)
- 8000-V Human-Body Model
- ESD Performance COM Port to GND
- 15000-V Human-Body Model
(A114-B, Class II)
- 15000-V Human-Body Model
- Wide –3-dB Bandwidth = 1100 MHz Typical
- Packaged in 8-Pin TQFN (1.5 mm × 1.5 mm)
- APPLICATIONS
- Routes Signals for USB 1.0, 1.1, and 2.0
All other trademarks are the property of their respective owners
The TS3USB31E is a high-bandwidth switch specially designed for the switching of high-speed USB 2.0 signals in handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os. The wide bandwidth (1100 MHz) of this switch allows signals to pass with minimum edge and phase distortion. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. It is designed for low bit-to-bit skew and high channel-to-channel noise isolation, and is compatible with various standards, such as high-speed USB 2.0 (480 Mbps).
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | TS3USB31E High-Speed USB 2.0 (480-Mbps) 1-Port Switch with Single Enable and ESD Protection datasheet (Rev. A) | PDF | HTML | 2016/8/29 | ||
| 應用說明 | High-Speed Layout Guidelines for Signal Conditioners and USB Hubs (Rev. A) | PDF | HTML | 2026/1/8 | |||
| 應用說明 | Passive Mux Selection Based On Bandwidth (Rev. A) | PDF | HTML | 2024/7/31 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| UQFN (RSE) | 8 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。