REG710-33

Name: REG710-33
Brand: TI
SKU: REG710-33
Price: 0.55 USD

AKTIV

DC/DC-Wandler mit geschaltetem Kondensator, 30 mA, mit festem 3,3-V-Ausgang

Jetzt bestellen

Datenblatt

document-pdfAcrobat REG710xx Buck-Boost Charge Pump with up to 60-mA Output Current datasheet (Rev. H) (Englisch) PDF | HTML

REG710-33

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Iout (max) (A)

0.03

Vin (min) (V)

1.8

Vin (max) (V)

5.5

Type

Charge pump

Switching frequency (min) (kHz)

1000

Switching frequency (max) (kHz)

1000

Features

Enable

Vout (min) (V)

3.3

Vout (max) (V)

3.3

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Iq (typ) (A)

0.000065

Iout (max) (A)

0.03

Vin (min) (V)

1.8

Vin (max) (V)

5.5

Type

Charge pump

Switching frequency (min) (kHz)

1000

Switching frequency (max) (kHz)

1000

Features

Enable

Vout (min) (V)

3.3

Vout (max) (V)

3.3

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Iq (typ) (A)

0.000065

SOT-23 (DBV)

6

8.12 mm² 2.9 x 2.8

Wide Input Voltage Range: 1.8 V to 5.5 V
Automatic Step-Up and Step-Down Operation
Low Input Current Ripple
Low Output Voltage Ripple
Minimum Number of External Components—No Inductors
1-MHz Internal Oscillator Allows Small Capacitors
Shutdown Mode
Thermal and Current Limit Protection
Six Fixed Output Voltages Available:
- 2.5 V, 2.7 V, 3 V, 3.3 V, 5 V, 5.5 V

All trademarks are the property of their respective owners.

Wide Input Voltage Range: 1.8 V to 5.5 V
Automatic Step-Up and Step-Down Operation
Low Input Current Ripple
Low Output Voltage Ripple
Minimum Number of External Components—No Inductors
1-MHz Internal Oscillator Allows Small Capacitors
Shutdown Mode
Thermal and Current Limit Protection
Six Fixed Output Voltages Available:
- 2.5 V, 2.7 V, 3 V, 3.3 V, 5 V, 5.5 V

All trademarks are the property of their respective owners.

The REG710 family of devices are switched capacitor voltage converters that generate regulated, low-ripple output voltage from an unregulated input voltage. A wide input supply voltage from 1.8 V to 5.5 V makes the REG710 family of devices ideal for a variety of battery sources, such as single-cell Li-Ion, or 2-cell and 3-cell nickel-based or alkaline-based chemistries.

The input voltage may vary above and below the output voltage and the output remains in regulation. The device works as step-up or step-down converters without the need of an inductor, providing low EMI DC-DC conversion. The high switching frequency allows the use of small surface-mount capacitors, saving board space and reducing cost. The REG710 device is thermally protected and current limited, protecting the load and the regulator during fault conditions. Typical ground pin current (quiescent current) is 65 μA with no load, and less than 1 μA in shutdown mode.

The REG710 family of devices are switched capacitor voltage converters that generate regulated, low-ripple output voltage from an unregulated input voltage. A wide input supply voltage from 1.8 V to 5.5 V makes the REG710 family of devices ideal for a variety of battery sources, such as single-cell Li-Ion, or 2-cell and 3-cell nickel-based or alkaline-based chemistries.

The input voltage may vary above and below the output voltage and the output remains in regulation. The device works as step-up or step-down converters without the need of an inductor, providing low EMI DC-DC conversion. The high switching frequency allows the use of small surface-mount capacitors, saving board space and reducing cost. The REG710 device is thermally protected and current limited, protecting the load and the regulator during fault conditions. Typical ground pin current (quiescent current) is 65 μA with no load, and less than 1 μA in shutdown mode.

open-in-new

Andere AC/DC & DC/DC converters (integrated FET) suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 1

	Typ	Titel		Datum
*	Data sheet	REG710xx Buck-Boost Charge Pump with up to 60-mA Output Current datasheet (Rev. H)	PDF \| HTML	30 Okt 2015

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

REG710EVM-33 — Evaluierungsmodul für Abwärts/Aufwärtsladungspumpe REG710

The REG710EVM-33 is an evaluation tool for the 30mA buck-boost charge pump in SOT23-5 package. With an input voltage in the range of 1.8V to 5.5V, it delivers a regulated output voltage of 3.3V with up to 30mA of output current.

Specifications:

Input Voltage: 1.8V to 5.5V
Ouput Voltage: 3.3V +/- 6%
(...)

Benutzerhandbuch: PDF

Nicht verfügbar auf TI.com

Evaluierungsplatine

REG710EVM-5 — Evaluierungsmodul für Abwärts/Aufwärtsladungspumpe REG710-5

The REG710EVM-5 is an evaluation tool for the 30mA buck-boost charge pump in SOT23-5 package. With an input voltage in the range of 2.7V to 5.5V, it delivers a regulated output voltage of 5V with up to 30mA of output current.

Specifications

Input Voltage: 2.7V to 5.5V
Ouput Voltage: 5.0V +/- 6%
(...)

Benutzerhandbuch: PDF

Nicht verfügbar auf TI.com

Gehäuse	Pins	Herunterladen
SOT-23 (DBV)	6	Optionen anzeigen

Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

REG710-33

DC/DC-Wandler mit geschaltetem Kondensator, 30 mA, mit festem 3,3-V-Ausgang

REG710-33

Produktdetails

Technische Dokumentation

Design und Entwicklung

REG710EVM-33 — Evaluierungsmodul für Abwärts/Aufwärtsladungspumpe REG710

REG710EVM-5 — Evaluierungsmodul für Abwärts/Aufwärtsladungspumpe REG710-5

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Videoreihe

Videos