TPS2550
Einstellbarer, strombegrenzter Stromverteilungsschalter mit Active-Low-Konstantstrom
Gleiche Funktionalität, andere Pinbelegung als verglichener Baustein
TPS2550
- Adjustable current-limit, 100 mA–1100 mA
- Fast overcurrent response - 2 µS typical
- 94-mΩ high-side MOSFET (DBV package)
- Reverse input-output voltage protection
- Operating range: 2.5 V to 6.5 V
- Deglitched fault report
- 1-µA maximum standby supply current
- Junction temperature range: –40°C to 125°C
- Built-in soft-start
- 15 kV ESD protection (with external capacitance)
- UL listed – file No. E169910
- Current-limit resistor calculator – SLVC163
The TPS2550/51 power-distribution switch is intended for applications where heavy capacitive loads and short-circuits are likely to be encountered, incorporating a 100-mΩ, N-channel MOSFET in a single package. The current-limit threshold is user adjustable between 100 mA and 1.1 A via an external resistor. The power-switch rise and fall times are controlled to minimize current surges during switching.
The device limits the output current to a desired level by switching into a constant-current mode when the output load exceeds the current-limit threshold or a short is present. An internal reverse-voltage detection comparator disables the power-switch in the event that the output voltage is driven higher than the input to protect devices on the input side of the switch. The FAULT logic output asserts low during both overcurrent and reverse-voltage conditions.
Technische Dokumentation
Typ | Titel | Datum | ||
---|---|---|---|---|
* | Data sheet | TPS255x Adjustable Current-Limited Power-Distribution Switches datasheet (Rev. C) | PDF | HTML | 09 Okt 2023 |
Certificate | CB Certificate IEC 60950 A40 E169910 | 01 Jun 2020 | ||
Certificate | UL Certificate of Compliance Vol1-Sec6 E169910 | 01 Jun 2020 | ||
EVM User's guide | Power-Distribution Switch With Adjustable Current-Limit EVM (Rev. A) | 26 Mär 2009 |
Design und Entwicklung
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
Gehäuse | Pins | Herunterladen |
---|---|---|
SOT-23 (DBV) | 6 | Optionen anzeigen |
WSON (DRV) | 6 | Optionen anzeigen |
Bestellen & Qualität
- RoHS
- REACH
- Bausteinkennzeichnung
- Blei-Finish/Ball-Material
- MSL-Rating / Spitzenrückfluss
- MTBF-/FIT-Schätzungen
- Materialinhalt
- Qualifikationszusammenfassung
- Kontinuierliches Zuverlässigkeitsmonitoring
- Werksstandort
- Montagestandort
Support und Schulungen
TI E2E™-Foren mit technischem Support von TI-Ingenieuren
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.