Startseite Energiemanagement Stromversorgung und Treiber für LCD & OLED -Displays

TPS65167A

AKTIV

4-kanalige LCD-Vorspannungsversorgung mit voll integr. positiver Ladungspumpe, LDO-Controller, HVS (

Produktdetails

Display type LCD unipolar IC integration LCD bias Vin (min) (V) 6 Vin (max) (V) 14 Applications 13 to 21 inches, 21 inches and above Source driver voltage (max) (V) 19 Level shifter/scan driver (Ch) 0 V_POS (max) (V) 30 V_NEG (max) (V) -2 Features GPM or GVS, Output discharge, Temperature sensor or compensation Topology Boost Rating Catalog Operating temperature range (°C) -40 to 85
Display type LCD unipolar IC integration LCD bias Vin (min) (V) 6 Vin (max) (V) 14 Applications 13 to 21 inches, 21 inches and above Source driver voltage (max) (V) 19 Level shifter/scan driver (Ch) 0 V_POS (max) (V) 30 V_NEG (max) (V) -2 Features GPM or GVS, Output discharge, Temperature sensor or compensation Topology Boost Rating Catalog Operating temperature range (°C) -40 to 85
VQFN (RHA) 40 36 mm² 6 x 6
  • 6 V to 14 V Input Voltage Range
  • Vs Output Voltage Range up to 19 V
  • Boost Converter With 3.5-A Switch Current
  • Boost Converter Overvoltage Protection
  • 2.5-A Step-Down Converter With 3.3-V Fixed or Adjustable Output
  • 750 kHz Fixed Switching Frequency
  • 150 mA Negative Charge Pump Driver for VGL
  • 50 mA Positive Charge Pump for VGH
  • LDO Controller for Logic Supply
  • Gate Voltage Shaping for VGH
  • Temperature Sensor Output
  • TPS65167 - High Voltage Stress Test Vs
    and VGH
  • TPS65167A - High Voltage Stress Test Vs only
  • Adjustable Sequencing
  • Gate Drive Signal for Isolation Switch
  • Short-Circuit Protection
  • Internal Soft-start
  • Thermal Shutdown
  • Available in 6 × 6 mm 40 Pin QFN Package
  • APPLICATIONS
    • LCD TV Panel
    • LCD Monitor
  • 6 V to 14 V Input Voltage Range
  • Vs Output Voltage Range up to 19 V
  • Boost Converter With 3.5-A Switch Current
  • Boost Converter Overvoltage Protection
  • 2.5-A Step-Down Converter With 3.3-V Fixed or Adjustable Output
  • 750 kHz Fixed Switching Frequency
  • 150 mA Negative Charge Pump Driver for VGL
  • 50 mA Positive Charge Pump for VGH
  • LDO Controller for Logic Supply
  • Gate Voltage Shaping for VGH
  • Temperature Sensor Output
  • TPS65167 - High Voltage Stress Test Vs
    and VGH
  • TPS65167A - High Voltage Stress Test Vs only
  • Adjustable Sequencing
  • Gate Drive Signal for Isolation Switch
  • Short-Circuit Protection
  • Internal Soft-start
  • Thermal Shutdown
  • Available in 6 × 6 mm 40 Pin QFN Package
  • APPLICATIONS
    • LCD TV Panel
    • LCD Monitor

The TPS65167 offers a compact power supply solution to provide all voltages required by a LCD panel for large size monitor and TV panel applications running from a 12-V supply rail.

The device generates all 3 voltage rails for the TFT LCD bias (Vs, VGL and VGH). In addition to that it includes a step-down converter and a LDO controller to provide two logic voltage rails. The device incorporates a high voltage switch that can be controlled by a logic signal from the external timing controller (TCON). This function allows gate voltage shaping for VGH. The device also features a high voltage stress test where the output voltage of VGH is set to typically 30 V and the output voltage of Vs is programmable to any higher voltage. The high voltage stress test is enabled by pulling the HVS pin high. The device consists of a boost converter to provide the source voltage Vs operating at a fixed switching frequency of 750 kHz. A fully integrated positive charge pump, switching automatically between doubler and tripler mode provides an adjustable regulated TFT gate on voltage VGH. A negative charge pump driver provides adjustable regulated output voltages VGL. To minimize external components the charge pumps for VGH and VGL operate at a fixed switching frequency of 1.5 MHz. The device includes safety features like overvoltage protection of the boost converter, short-circuit protection of VGH and VGL as well as thermal shutdown.

The TPS65167 offers a compact power supply solution to provide all voltages required by a LCD panel for large size monitor and TV panel applications running from a 12-V supply rail.

The device generates all 3 voltage rails for the TFT LCD bias (Vs, VGL and VGH). In addition to that it includes a step-down converter and a LDO controller to provide two logic voltage rails. The device incorporates a high voltage switch that can be controlled by a logic signal from the external timing controller (TCON). This function allows gate voltage shaping for VGH. The device also features a high voltage stress test where the output voltage of VGH is set to typically 30 V and the output voltage of Vs is programmable to any higher voltage. The high voltage stress test is enabled by pulling the HVS pin high. The device consists of a boost converter to provide the source voltage Vs operating at a fixed switching frequency of 750 kHz. A fully integrated positive charge pump, switching automatically between doubler and tripler mode provides an adjustable regulated TFT gate on voltage VGH. A negative charge pump driver provides adjustable regulated output voltages VGL. To minimize external components the charge pumps for VGH and VGL operate at a fixed switching frequency of 1.5 MHz. The device includes safety features like overvoltage protection of the boost converter, short-circuit protection of VGH and VGL as well as thermal shutdown.

Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

Ähnliche Funktionalität wie verglichener Baustein
TPS65176 AKTIV LCD-Bias-IC für TV This product has the same rails minus an LDO for Vaux & temperature sensor.

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 6
Typ Titel Datum
* Data sheet Compact LCD Bias Supply for TFT-LCD TV Panels datasheet (Rev. C) 10 Mär 2008
Application note Basic Calculation of a Boost Converter's Power Stage (Rev. D) PDF | HTML 28 Okt 2022
Application note Understanding Undervoltage Lockout in Power Devices (Rev. A) 19 Sep 2018
Application note Generation of a VCOM buffer input using PWM signal 21 Dez 2015
Application note Basic Calculation of a Buck Converter's Power Stage (Rev. B) 17 Aug 2015
Application note Minimizing Ringing at the Switch Node of a Boost Converter 15 Sep 2006

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)
Gehäuse Pins Herunterladen
VQFN (RHA) 40 Optionen anzeigen

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos