ON requests are used to switch on the device, which transitions the device from the OFF to the ACTIVE state. Table 6-9 lists the ON requests.
|RPWRON (terminal)||No||Low||Level sensitive||16 ms ± 1 ms|
|PWRON (terminal)||No||Low||Level sensitive||N/A|
|Part of interrupts (event)||Yes (INTx_MASK register.
|POWERHOLD (terminal)||No||High||Level sensitive||3 - 5 ms typical|
If one of the events listed in Table 6-9 occurs, it powers on the device, unless one of the gating conditions listed in Table 6-10 is present. For interrupt sources that can be configured as ON requests, see Table 6-6.
|VSYS_HI (event)||No||Low||VCC_SENSE < VSYS_HI|
|HOTDIE (event)||No||High||Device temperature exceeds HOTDIE level|
|PWRDOWN (terminal)||No||OTP configurable|
|RESET_IN (terminal)||No||OTP configurable|