JAJSOY7A June   2008  – September 2023 TPS2551-Q1

PRODUCTION DATA  

  1.   1
  2. 1 特長
  3. 2 アプリケーション
  4. 3 概要
  5. 4 Revision History
  6. 5 Pin Configurations and Functions
  7. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Typical Characteristics
  8. 7 Parameter Measurement Information
  9. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 機能ブロック図
    3. 8.3 Feature Description
      1. 8.3.1 Overcurrent
      2. 8.3.2 Reverse-Voltage Protection
      3. 8.3.3 FAULT Response
      4. 8.3.4 Undervoltage Lockout (UVLO)
      5. 8.3.5 Enable (EN)
      6. 8.3.6 Thermal Sense
      7. 8.3.7 Device Functional Modes
    4. 8.4 Programming
      1. 8.4.1 Programming the Current-Limit Threshold
  10. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Two-Level Current-Limit Circuit
      2. 9.2.2 Design Requirements
      3. 9.2.3 Detail Design Procedure
        1. 9.2.3.1 Designing Above a Minimum Current Limit
        2. 9.2.3.2 Designing Below a Maximum Current Limit
        3. 9.2.3.3 Input and Output Capacitance
      4. 9.2.4 Auto-Retry Functionality
      5. 9.2.5 Latch-Off Functionality
      6. 9.2.6 Typical Application as USB Power Switch
        1. 9.2.6.1 Design Requirements
          1. 9.2.6.1.1 USB Power-Distribution Requirements
        2. 9.2.6.2 Detail Design Procedure
          1. 9.2.6.2.1 Universal Serial Bus (USB) Power-Distribution Requirements
    3. 9.3 Power Supply Recommendations
      1. 9.3.1 Self-Powered and Bus-Powered Hubs
      2. 9.3.2 Low-Power Bus-Powered and High-Power Bus-Powered Functions
      3. 9.3.3 Power Dissipation and Junction Temperature
    4. 9.4 Layout
      1. 9.4.1 Layout Guidelines
      2. 9.4.2 Layout Example
  11. 10Device and Documentation Support
    1. 10.1 ドキュメントの更新通知を受け取る方法
    2. 10.2 サポート・リソース
    3. 10.3 Trademarks
    4. 10.4 静電気放電に関する注意事項
    5. 10.5 用語集
  12. 11Mechanical, Packaging, and Orderable Information

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）
サーマルパッド・メカニカル・データ
発注情報

9.2.3.1 Designing Above a Minimum Current Limit

Some applications require that current-limiting cannot occur below a certain threshold. For this example, assume that 1 A must be delivered to the load so that the minimum desired current-limit threshold is 1000 mA. Use the IOS equations and Figure 8-1 to select RILIM.

  • IOS(min) (mA) = 1000 mA
  • IOS(min) (mA) = (39700 V) / (RILIM (kΩ)) 1.342 + 50
  • RILIM (kΩ) = [(39700 V) / (IOS(min) (mA) - 50)]1/1.342
  • RILIM = 16.14 kΩ

Select the closest 1% resistor less than the calculated value: RILIM = 16 kΩ. This selection sets the minimum current-limit threshold at 1 A . Use the IOC equations, Figure 8-1, and the previously calculated value for RILIM to calculate the maximum resulting current-limit threshold.

  • RILIM = 16 kΩ
  • IOC(max) (mA) = (24500 V) / (RILIM (kΩ)) 0.975 + 50
  • IOC(max) (mA) = (24500 V) / (16 (kΩ))0.975 + 50
  • IOC(max) = 1691 mA

The resulting maximum current-limit threshold is 1.69 A with a 16-kΩ resistor.