SLVA888C April   2017  – January 2021 TPS65987D , TPS65988

 

  1.   Trademarks
  2. 1Schematic Design Guidelines
    1. 1.1  Power Supply Scheme
      1. 1.1.1 VIN_3V3
      2. 1.1.2 LDO_3V3
      3. 1.1.3 LDO_1V8
    2. 1.2  Boot Configuration
      1. 1.2.1 BUSPOWER (ADCIN1)
      2. 1.2.2 External SPI Flash
    3. 1.3  I2C Interface
      1. 1.3.1 I2C Pin Address Setting (ADCIN2)
    4. 1.4  HRESET
    5. 1.5  Configuration Channel / VCONN Lines
      1. 1.5.1 PP_CABLE
    6. 1.6  Battery Charger Detection and Advertisement (BC1.2)
    7. 1.7  GPIOs
    8. 1.8  Hot Plug Detect or HPD Line
    9. 1.9  PP_EXT Power Path Control
    10. 1.10 Power Path Considerations
  3. 2Layout Guidelines
    1. 2.1 Power Domain
    2. 2.2 Hi Speed Lines
    3. 2.3 Other Considerations
  4. 3Summary
  5. 4References
  6.   A Appendix
    1.     A.1 Dead Battery Considerations
    2.     A.2 TPS65987DDH Schematic Checklist
    3.     A.3 TPS65987DDH System Checklist
  7.   Revision History

2 Layout Guidelines

This section includes the recommendations which must be used while designing with the TPS65987DDH PD controllers. Not all the recommendations can be used depending on the design, and therefore the designer is expected to determine the requirements to achieve the design goals. Use the guidelines in Section 10 of the device data sheet for addition information.