SLVA888C April   2017  – January 2021 TPS65987D , TPS65988

 

  1.   Trademarks
  2. 1Schematic Design Guidelines
    1. 1.1  Power Supply Scheme
      1. 1.1.1 VIN_3V3
      2. 1.1.2 LDO_3V3
      3. 1.1.3 LDO_1V8
    2. 1.2  Boot Configuration
      1. 1.2.1 BUSPOWER (ADCIN1)
      2. 1.2.2 External SPI Flash
    3. 1.3  I2C Interface
      1. 1.3.1 I2C Pin Address Setting (ADCIN2)
    4. 1.4  HRESET
    5. 1.5  Configuration Channel / VCONN Lines
      1. 1.5.1 PP_CABLE
    6. 1.6  Battery Charger Detection and Advertisement (BC1.2)
    7. 1.7  GPIOs
    8. 1.8  Hot Plug Detect or HPD Line
    9. 1.9  PP_EXT Power Path Control
    10. 1.10 Power Path Considerations
  3. 2Layout Guidelines
    1. 2.1 Power Domain
    2. 2.2 Hi Speed Lines
    3. 2.3 Other Considerations
  4. 3Summary
  5. 4References
  6.   A Appendix
    1.     A.1 Dead Battery Considerations
    2.     A.2 TPS65987DDH Schematic Checklist
    3.     A.3 TPS65987DDH System Checklist
  7.   Revision History

3 Summary

This application note describes important considerations for schematic and layout design. A system designer is expected to follow all the recommendations mentioned in this application note as well as refer all other relevant application notes and specifications before starting any design with TPS65987DDH PD Controller.