SGLS423A February   2025  – December 2025 SN55LVRA4-SEP

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 Electrical Characteristics
    6. 5.6 Switching Characteristics
    7. 5.7 Typical Characteristics
  7. 6 Parameter Measurement Information
  8. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Receiver Output States
      2. 7.3.2 General Purpose Comparator
      3. 7.3.3 Common-Mode Range vs Supply Voltage
    4. 7.4 Equivalent Input and Output Schematic Diagrams
    5. 7.5 Device Functional Modes
  9. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Detailed Design Procedure
      2. 8.2.2 Design Requirements
      3. 8.2.3 Application Performance Plots
      4. 8.2.4 Cold Sparing
    3. 8.3 Active Failsafe Feature
    4. 8.4 ECL/PECL-to-LVTTL Conversion with TI's LVDS Receiver
    5. 8.5 Test Conditions
    6. 8.6 Equipment
  10. 9 Power Supply Recommendations
    1. 9.1 Supply Bypass Capacitance
  11. 10Layout
    1. 10.1 Layout Guidelines
      1. 10.1.1 Microstrip vs. Stripline Topologies
      2. 10.1.2 Dielectric Type and Board Construction
      3. 10.1.3 Recommended Stack Layout
      4. 10.1.4 Separation Between Traces
      5. 10.1.5 Crosstalk and Ground Bounce Minimization
    2. 10.2 Layout Example
  12. 11Device and Documentation Support
    1. 11.1 Documentation Support
      1. 11.1.1 Related Documentation
    2. 11.2 Receiving Notification of Documentation Updates
    3. 11.3 Support Resources
    4. 11.4 Trademarks
    5. 11.5 Electrostatic Discharge Caution
    6. 11.6 Glossary
  13. 12Revision History
  14. 13Mechanical, Packaging, and Orderable Information

10.1.5 Crosstalk and Ground Bounce Minimization

To reduce crosstalk, it is important to provide a return path to high-frequency currents that is as close as possible to its originating trace. A ground plane usually achieves this. Because the returning currents always choose the path of lowest inductance, they are most likely to return directly under the original trace, thus minimizing crosstalk. Lowering the area of the current loop lowers the potential for crosstalk. Traces kept as short as possible with an uninterrupted ground plane running beneath them emit the minimum amount of electromagnetic field strength. Discontinuities in the ground plane increase the return path inductance and should be avoided.