The devices have the ability to control an
external LIN or CAN FD transceiver or even other
LIN and CAN FD SBCs. The processor controls the
mode of the transceiver with the GFO pin as an
EN/STB/nSTB/S pin. This capability allows the
system implementer the ability to have many
different configurations.
- Two CAN FD transceivers by
using the TCAN2855-Q1 with an eight
pin CAN FD transceiver
- Two CAN FD transceivers and a
LIN transceiver by using the
TCAN2857-Q1 with an
eight pin CAN FD transceiver, see Figure 9-6
- On CAN FD transceiver and two
LIN transceivers by using the
TCAN2857-Q1 with a LIN
transceiver, see Figure 9-4
- A second SBC with a LIN
transceiver can be implemented by using the
TCAN2857-Q1 and the
TLIN1028x, see Figure 9-5
- A second SBC with a CAN transceiver can be
implemented by using the
TCAN2857-Q1and the
TCAN1162x, see Figure 9-7