SLUSF65B October   2023  – August 2026 BQ25185

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Thermal Information
    4. 5.4 Recommended Operating Conditions
    5. 5.5 Electrical Characteristics
    6. 5.6 Timing Requirements
    7. 5.7 Typical Characteristics
  7. 6 Detailed Description
    1. 6.1 Overview
      1. 6.1.1 Battery Charging Process
        1. 6.1.1.1 Trickle Charge
        2. 6.1.1.2 Precharge
        3. 6.1.1.3 Fast Charge
        4. 6.1.1.4 ISET Pin Detection
        5. 6.1.1.5 Termination
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1  Input Voltage Based Dynamic Power Management (VINDPM)
      2. 6.3.2  Dynamic Power Path Management Mode (DPPM)
      3. 6.3.3  Battery Supplement Mode
      4. 6.3.4  Sleep Mode
      5. 6.3.5  SYS Regulation
      6. 6.3.6  ILIM/VSET Control
      7. 6.3.7  Protection Mechanisms
        1. 6.3.7.1 Input Overvoltage Protection
        2. 6.3.7.2 Battery Undervoltage Lockout
        3. 6.3.7.3 Battery Overcurrent Protection
        4. 6.3.7.4 System Overvoltage Protection
        5. 6.3.7.5 System Short Protection
        6. 6.3.7.6 Thermal Protection and Thermal Regulation
        7. 6.3.7.7 Safety Timer
      8. 6.3.8  Pushbutton Long Press Function
      9. 6.3.9  External NTC Monitoring (TS)
        1. 6.3.9.1 TS Biasing and Function
      10. 6.3.10 Status Pins
    4. 6.4 Device Functional Modes
  8. 7 Application and Implementation
    1. 7.1 Application Information
    2. 7.2 Typical Application
      1. 7.2.1 Design Requirements
      2. 7.2.2 Detailed Design Procedure
        1. 7.2.2.1 Input Current and Battery Regulation Voltage - ILIM/VSET
        2. 7.2.2.2 Fast Charge Current- ISET
        3. 7.2.2.3 Recommended Passive Components
      3. 7.2.3 Application Curves
    3. 7.3 Power Supply Recommendations
    4. 7.4 Layout
      1. 7.4.1 Layout Guidelines
      2. 7.4.2 Layout Example
  9. 8 Device and Documentation Support
    1. 8.1 Device Support
      1. 8.1.1 Third-Party Products Disclaimer
    2. 8.2 Receiving Notification of Documentation Updates
    3. 8.3 Support Resources
    4. 8.4 Trademarks
    5. 8.5 Electrostatic Discharge Caution
    6. 8.6 Glossary
  10. 9 Revision History
  11. 10Mechanical, Packaging, and Orderable Information

Battery Supplement Mode

While in DPPM mode, if the charging current falls to zero and the system load current increases beyond the programmed input current limit, the voltage at SYS decreases. When the SYS voltage drops below the battery voltage to VBSUP1, the battery supplements the input in supplying the system load. The battery stops supplementing the input in supplying the system load when the voltage on the SYS pin rises within the battery voltage to VBSUP2. During supplement mode, the battery supplement current is not regulated, but the BATOCP protection circuit is active. Battery termination is disabled while in supplement mode. Battery voltage must be higher than the battery undervoltage lockout threshold (VBUVLO) to supplement the input in supplying the system load.