SLUUD68 December   2024

1.   1
2.   Abstract
3. 13
4. 1General TI High Voltage Evaluation User Safety Guidelines
5. 2Module Compatibility
   1. 2.1 Supported Wolfspeed Modules and Evaluation Platforms
6. 3System Overview and Functions
   1. 3.1 Features
   2. 3.2 Specifications
   3. 3.3 PCB Pinout
   4. 3.4 Device Information
      1. 3.4.1 Primary-Side Power
      2. 3.4.2 Primary-Side I/O and Diagnostics
      3. 3.4.3 Secondary-Side Bias Supply
      4. 3.4.4 Output Stage Gate Loop
      5. 3.4.5 Short-Circuit Detection - DESAT
7. 4Using the EVM
   1. 4.1 Equipment List
   2. 4.2 Test Setups and Procedures
      1. 4.2.1 Power-On and Bias Supply Check
      2. 4.2.2 Output Switching
8. 5EVM Example Measurements
   1. 5.1 DESAT Functionality Testing
9. 6EVM Tuning
   1. 6.1 Adjust Power Supplies
      1. 6.1.1 Adjust Only VDD Bias Supply
      2. 6.1.2 Adjust VDD and VEE Bias Supplies Simultaneously
      3. 6.1.3 Switch to Unipolar Bias Supply
      4. 6.1.4 Bypass VDD LDO
   2. 6.2 Adjust Drive Strength
   3. 6.3 Adjust Soft Turn-off Strength
10. 7Hardware Design Files
    1. 7.1 Schematics
    2. 7.2 PCB Layouts
    3. 7.3 Bill of Materials (BOM)
11. 8Additional Information
    1. 8.1 Trademarks
12. 9Revision History