SLUUDA1 April   2025

 

  1.   1
  2.   Description
  3.   Applications
  4.   Features
  5.   5
  6. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specifications
    4. 1.4 Device Information
  7. 2Hardware
    1. 2.1 Power Requirements
    2. 2.2 Setup
    3. 2.3 Header Information
      1. 2.3.1 USB Interface
      2. 2.3.2 Communication Interfaces
      3. 2.3.3 GPIO Interface (Future Implementation)
    4. 2.4 Jumper Information
      1. 2.4.1 Pull-Up Interface
      2. 2.4.2 1MHz Pull-Up Interface
      3. 2.4.3 MCU Power Headers
    5. 2.5 Push Buttons
    6. 2.6 Interfaces
      1. 2.6.1 Overview
      2. 2.6.2 I2C Interface
      3. 2.6.3 SMBus Interface
      4. 2.6.4 SPI Interface (Future Implementation)
      5. 2.6.5 UART Interface (Future Implementation)
  8. 3Software
    1. 3.1 Software Description
    2. 3.2 Software Installation
    3. 3.3 GUI Installation
    4. 3.4 Software Development
    5. 3.5 Programming Options
  9. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layouts
    3. 4.3 Bill of Materials (BOM)
  10. 5Additional Information
    1. 5.1 Trademarks
  11. 6Related Documentation

2.4.3 MCU Power Headers

Next to the MCU are three headers that allow for the MCU to be properly powered. The J2, J6, and J7 header options should have jumpers connected at all times.

EV2500 MCU Power Header Location

Figure 2-5 MCU Power Header Location