SLUUDA1 April   2025

 

  1.   1
  2.   Description
  3.   Applications
  4.   Features
  5.   5
  6. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specifications
    4. 1.4 Device Information
  7. 2Hardware
    1. 2.1 Power Requirements
    2. 2.2 Setup
    3. 2.3 Header Information
      1. 2.3.1 USB Interface
      2. 2.3.2 Communication Interfaces
      3. 2.3.3 GPIO Interface (Future Implementation)
    4. 2.4 Jumper Information
      1. 2.4.1 Pull-Up Interface
      2. 2.4.2 1MHz Pull-Up Interface
      3. 2.4.3 MCU Power Headers
    5. 2.5 Push Buttons
    6. 2.6 Interfaces
      1. 2.6.1 Overview
      2. 2.6.2 I2C Interface
      3. 2.6.3 SMBus Interface
      4. 2.6.4 SPI Interface (Future Implementation)
      5. 2.6.5 UART Interface (Future Implementation)
  8. 3Software
    1. 3.1 Software Description
    2. 3.2 Software Installation
    3. 3.3 GUI Installation
    4. 3.4 Software Development
    5. 3.5 Programming Options
  9. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layouts
    3. 4.3 Bill of Materials (BOM)
  10. 5Additional Information
    1. 5.1 Trademarks
  11. 6Related Documentation

2.3.2 Communication Interfaces

The EV2500 interfaces are described in Table 2-1.

Table 2-1 Communication Interfaces
Reference Designator Function Function
J18: I2C I2C Interface Port Terminal block for connecting to a target I2C device
J28: SMBus SMBus Interface Port Terminal block for connecting to a target SMBUS device
J20: SPI SPI Interface Port Terminal block for connecting to a target SPI device
J15: UART UART Interface Port Terminal block for connecting to a target UART device