SLVT251 July   2026

 

  1.   1
  2.   Description
  3.   Resources
  4.   Features
  5.   Applications
  6.   6
  7. 1System Description
    1. 1.1 Key System Specifications
  8. 2System Overview
    1. 2.1 Block Diagram
    2. 2.2 Design Considerations
      1. 2.2.1 High-Voltage Stackable Architecture
      2. 2.2.2 Electrochemical Impedance Spectroscopy (EIS) Subsystem
      3. 2.2.3 EIS Synchronization Requirement
      4. 2.2.4 PWM Input as Crystal of the First BQ79826Z-Q1
      5. 2.2.5 Temperature Sensing and Multiplexer Network
      6. 2.2.6 Cell Balancing Circuit and Operation
      7. 2.2.7 MCU and System Control Architecture
      8. 2.2.8 Protection and On-Board Diagnostics
    3. 2.3 Highlighted Products
      1. 2.3.1 BQ79826Z-Q1
      2. 2.3.2 TMUX1308
      3. 2.3.3 TMP61
      4. 2.3.4 SN74LXC1T14
  9. 3Hardware, Software, Testing Requirements, and Test Results
    1. 3.1 Hardware Requirements
    2. 3.2 Software
    3. 3.3 Test Setup
    4. 3.4 Pack Test Results
      1. 3.4.1 Cell Voltage Reliability Test
      2. 3.4.2 EIS Measurement Repeatability
      3. 3.4.3 Pack EIS Measurement Nyquist Plot
      4. 3.4.4 Current Consumption per BQ79826Z-Q1
  10. 4Design and Documentation Support
    1. 4.1 Design Files
      1. 4.1.1 Schematics
      2. 4.1.2 BOM
      3. 4.1.3 PCB Layout Recommendations
    2. 4.2 Tools and Software
      1. 4.2.1 Tools
    3. 4.3 Documentation Support
    4. 4.4 Support Resources
    5.     Trademarks
  11. 5About the Author

Cell Voltage Reliability Test

Test step

  1. Put battery pack in the temp chamber and set temperature to room temperature. Wait for thermal equilibrium.
  2. Collect Vcell data from all the cells.
  3. Repeat step 2 nine times (10 measurements total).
  4. Compute the mean and rms voltage value from each cell.

Test Result

Vrms < 0.3mV for every cell

Vmax < 1mV for every cell