SLVUD43 February   2025

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Modification
    2. 2.2 Connector, Test Point, and Jumper Descriptions
      1. 2.2.1 Connector and Test Point Descriptions
      2. 2.2.2 Jumper Configuration
        1. 2.2.2.1 JP2 (ENABLE)
        2. 2.2.2.2 JP5 and JP1 (External Feedback and Internal Feedback Selection)
    3. 2.3 Test Procedure
  9. 3Software
    1. 3.1 Software User Interface
      1. 3.1.1 Install USB2ANY Explorer
      2. 3.1.2 GUI Installation
      3. 3.1.3 Interface Hardware Setup
      4. 3.1.4 User Interface Operation
      5. 3.1.5 Register Map Screen
  10. 4Hardware Design Files
    1. 4.1 Schematic
    2. 4.2 PCB Layouts
    3. 4.3 Bill of Materials
  11. 5Additional Information
    1.     Trademarks

4.2 PCB Layouts

TPS55285EVM TPS55285EVM-053 Top-Side Layout Figure 4-2 TPS55285EVM-053 Top-Side Layout
TPS55285EVM TPS55285EVM-053 Inner Layer1 Figure 4-3 TPS55285EVM-053 Inner Layer1
TPS55285EVM TPS55285EVM-053 Inner Layer2 Figure 4-4 TPS55285EVM-053 Inner Layer2
TPS55285EVM TPS55285EVM-053 Bottom-Side Layout Figure 4-5 TPS55285EVM-053 Bottom-Side Layout