TIDUEO0C July   2019  – March 2021

 

  1.   Description
  2.   Resources
  3.   Features
  4.   Applications
  5.   5
  6. 1System Description
    1. 1.1 Key System Specifications
  7. 2System Overview
    1. 2.1 Block Diagram
    2. 2.2 Design Considerations
    3. 2.3 Highlighted Products
      1. 2.3.1 TPS63900: 1.8V-5.5 VIN Buck-Boost Converter With 75-nA Ultra-low Quiescent Current and 400-mA Output Current
      2. 2.3.2 TPS610995: 0.7 VIN Synchronous Boost Converter With 400-nA Ultra-low Quiescent Current and 1-A Peak Current
      3. 2.3.3 TPS62840: 750-mA Synchronous Step-Down Converter With Ultra-low Quiescent Current Consumption
    4. 2.4 System Design Theory
      1. 2.4.1 Battery Gauge BQ35100
      2. 2.4.2 In-System Current Monitoring
        1. 2.4.2.1 Resistor Values Calculation for the two Current Ranges
        2. 2.4.2.2 LPV521 Gain Calculation
        3. 2.4.2.3 Current Ranges Simulation With TINA-TI
        4. 2.4.2.4 Key ADS7142 Register Settings in TIDA-01546 Firmware
          1. 2.4.2.4.1 ADS7142 Sampling Rate
      3. 2.4.3 NB-IoT Module From u-blox
      4. 2.4.4 NB-IoT Module From Quectel
  8. 3Hardware, Software, Testing Requirements, and Test Results
    1. 3.1 Required Hardware
      1. 3.1.1 Testing TIDA-010053
      2. 3.1.2 TPS62840 Subsystem
      3. 3.1.3 TPS610995 Subsystem
      4. 3.1.4 Software
    2. 3.2 Testing and Results
      1. 3.2.1 Test Setup
      2. 3.2.2 Test Results
        1. 3.2.2.1 Test Results With the TPS62840 Buck Converter
        2. 3.2.2.2 Test Results With the TPS610995 Boost Converter
        3. 3.2.2.3 Test Results With the TPS63900 Buck-Boost Converter NB
        4. 3.2.2.4 Summary
  9. 4Design Files
    1. 4.1 Schematics
    2. 4.2 Bill of Materials
    3. 4.3 PCB Layout Recommendations
      1. 4.3.1 Layout Prints
    4. 4.4 Altium Project
    5. 4.5 Gerber Files
    6. 4.6 Assembly Drawings
  10. 5Software Files
  11. 6Related Documentation
    1. 6.1 Trademarks
  12. 7Terminology
  13. 8About the Author
  14. 9Revision History

9 Revision History

Changes from Revision B (August 2020) to Revision C (March 2021)

  • Added 1s1p and 2s2p battery configuration testing data for the TPS63900.Go

Changes from Revision A (March 2020) to Revision B (August 2020)

  • Updated document title.Go
  • Updated the numbering format for tables, figures, and cross-references throughout the document.Go
  • Changed Description section to include TPS63900 topology.Go
  • Changed Features section to include TPS63900 topology.Go
  • Updated block diagram.Go
  • Updated Table 1-1 to include specs for the TPS63900 device.Go
  • Changed Figure 2-1.Go
  • Updated "Design Considerations" to include TPS63900 topologyGo
  • Added section under Highlighted products, “1.8V–5.5 VIN Buck-Boost Converter With 200-nA Ultra-low Quiescent Current and 400-mA Output Current”Go
  • Added section in Test Results (3.2.2), titled “ Test Results with the TPS63900 Buck-Boost Converter”.Go
  • Updated “Test Setup” section to include TPS63900 test setup, added figure that demonstrated my setup with the TPS63900 board.Go
  • Updated Figure 3-7. “Test Setup Block Diagram”.Go