Packaging information
| Package | Pins CDIP (J) | 14 |
| Operating temperature range (°C) -55 to 125 |
| Package qty | Carrier 25 | TUBE |
Features for the CD4016B-MIL
- 20-V digital or ± 10-V peak-to-peak switching
- 280-
typical on-state resistance for 15-V operation - Switch on-state resistance matched to within 10 typ. over 15-V signal-input range
- High on/off output-voltage ratio:
65 dB typ. @ fis = 10 kHz, RL = 10 k - High degree of linearity:
<0.5% distortion typ. @ fis = 1 kHz, Vis = 5 Vp-p, VDD–VSS - Extremely low off-state switch leakage resulting in very low offset current and high effective off-state resistance:
100pA typ. @ VDD–VSS = 18 V, TA = 25°C - Extremely high control input impedance (control circuit isolated form signal circuit:
1012typ. - Low crosstalk between switches:
–50 dB typ. @ fis= 0.9 MHz, RL = 1 k - Matched control-input to signal-output capacitance:
Reduces output signal transients - Frequency response, switch on = 40MHz (typ.)
- 100% tested for quiescent current at 20 V
- Maximum control input current of 1 µA at 18 V over full package temperature range; 100 nA at 18 V and 25°C
- 5-V, 10-V, and 15-V parametric ratings
- Applications:
- Analog signal switching/multiplexing
- Signal gating
- Squelch control
- Chopper
- Modulator
- Demodulator
- Commutating switch
- Digital signal switching/multiplexing
- CMOS logic implementation
- Analog-to-digital & digital-to-analog conversion
- Digital control of frequency, impedance, phase, and analog-signal gain
- Analog signal switching/multiplexing
Data sheet acquired from Harris Semiconductor
Description for the CD4016B-MIL
CD4016B Series types are quad bilateral switches intended for the transmission or multiplexing of analog or digital signals. Each of the four independent bilateral switches has a single control signal input which simultaneously biases both the p and n device in a given switch on or off.
The CD4016 "B" Series types are supplied in 14-lead hermetic dual-in-line ceramic packages (F3A suffix), 14-lead dual-in-line plastic packages (E suffix), 14-lead small-outline packages (M, MT, M96, and NSR suffixes), and 14-lead thin shrink small-outline packages (PW and PWR suffixes).