Home Drahtlose Konnektivität Weitreichendes Sub-1 GHz Sub-1-GHz-Transceiver
Home
Drahtlose Konnektivität
Weitreichendes Sub-1 GHz
Sub-1-GHz-Transceiver

CC1125

AKTIV

Extrem leistungsfähiger drahtloser Sub-1 GHz-Transceiver für Schmalbandsysteme

Jetzt bestellen
Datenblatt
Benutzerhandbücher
Fehlerverzeichnis

CC1125

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Protocols 6LoWPAN, IEEE 802.15.4, Proprietary, Wireless M-Bus Modulation scheme (G)MSK, 2(G)FSK, 4(G)FSK, ASK, OOK Frequency bands 136.7-160, 164-192, 205-240, 273.3-320, 410-480, 820-960 Type Transceiver TX power (max) (dBm) 16 Sensitivity (best) (dBm) -129 RX current (lowest) (mA) 17 Data rate (max) (Mbps) 0.2 Rating Catalog Operating temperature range (°C) -40 to 85 Edge AI enabled No
Protocols 6LoWPAN, IEEE 802.15.4, Proprietary, Wireless M-Bus Modulation scheme (G)MSK, 2(G)FSK, 4(G)FSK, ASK, OOK Frequency bands 136.7-160, 164-192, 205-240, 273.3-320, 410-480, 820-960 Type Transceiver TX power (max) (dBm) 16 Sensitivity (best) (dBm) -129 RX current (lowest) (mA) 17 Data rate (max) (Mbps) 0.2 Rating Catalog Operating temperature range (°C) -40 to 85 Edge AI enabled No
VQFN (RHB) 32 25 mm² 5 x 5
  • High-Performance, Single-Chip Transceiver
    • Adjacent Channel Selectivity: 67 dB at
      6.25-kHz Offset
    • Blocking Performance: 104 dB at 10 MHz
    • Excellent Receiver Sensitivity
      • –129 dBm at 300 bps
      • –123 dBm at 1.2 kbps
      • –110 dBm at 50 kbps
    • Very Low Phase Noise: –115 dBc/Hz at
      10-kHz Offset
  • Suitable for Systems Targeting ETSI
    Category 1
  • Separate 128-Byte RX and TX FIFOs
  • Support for Seamless Integration With the CC1190 Device for Increased Range Giving up to 3-dB Improvement in Sensitivity and up to +27-dBm Output Power
  • High Spectral Efficiency (9.6 kbps in 12.5-kHz Channel in Compliance With FCC Narrowbanding Mandate)
  • Power Supply
    • Wide Supply Voltage Range (2.0 V to 3.6 V)
    • Low Current Consumption:
      • RX: 2 mA in RX Sniff Mode
      • RX: 17 mA Peak Current in Low-Power Mode
      • RX: 26 mA Peak Current in High-Performance Mode
      • TX: 47 mA at +14 dBm
    • Power Down: 0.12 μA (0.5 μA With Enhanced Wake-On-Radio (eWOR) Timer Running)
  • Programmable Output Power up to +16 dBm With 0.4-dB Step Size
  • Automatic Output Power Ramping
  • Configurable Data Rates: 0 to 200 kbps
  • Supported Modulation Formats: 2-FSK,
    2-GFSK, 4-FSK, 4-GFSK, MSK, OOK
  • WaveMatch: Advanced Digital Signal Processing for Improved Sync Detect Performance
  • RoHS-Compliant 5-mm x 5-mm No-Lead QFN
    32-Pin Package (RHB)
  • Regulations – Suitable for Systems Targeting Compliance With
    • Europe: ETSI EN 300 220 Category 1, ETSI EN 54-25, ETSI EN 300 113, and EN 301 166
    • US: FCC CFR47 Part 15, 24, 90, 101
    • Japan: ARIB RCR STD-T30, T-67, T-108
  • Peripherals and Support Functions
    • eWOR Functionality for Automatic Low-Power Receive Polling
    • Includes Functions for Antenna Diversity Support
    • Support for Retransmissions
    • Support for Auto-Acknowledge of Received Packets
    • TCXO Support and Control, also in Power Modes
    • Automatic Clear Channel Assessment (CCA) for Listen-Before-Talk (LBT) Systems
    • Built-in Coding Gain Support for Increased Range and Robustness
    • Digital RSSI Measurement
    • Temperature Sensor
  • High-Performance, Single-Chip Transceiver
    • Adjacent Channel Selectivity: 67 dB at
      6.25-kHz Offset
    • Blocking Performance: 104 dB at 10 MHz
    • Excellent Receiver Sensitivity
      • –129 dBm at 300 bps
      • –123 dBm at 1.2 kbps
      • –110 dBm at 50 kbps
    • Very Low Phase Noise: –115 dBc/Hz at
      10-kHz Offset
  • Suitable for Systems Targeting ETSI
    Category 1
  • Separate 128-Byte RX and TX FIFOs
  • Support for Seamless Integration With the CC1190 Device for Increased Range Giving up to 3-dB Improvement in Sensitivity and up to +27-dBm Output Power
  • High Spectral Efficiency (9.6 kbps in 12.5-kHz Channel in Compliance With FCC Narrowbanding Mandate)
  • Power Supply
    • Wide Supply Voltage Range (2.0 V to 3.6 V)
    • Low Current Consumption:
      • RX: 2 mA in RX Sniff Mode
      • RX: 17 mA Peak Current in Low-Power Mode
      • RX: 26 mA Peak Current in High-Performance Mode
      • TX: 47 mA at +14 dBm
    • Power Down: 0.12 μA (0.5 μA With Enhanced Wake-On-Radio (eWOR) Timer Running)
  • Programmable Output Power up to +16 dBm With 0.4-dB Step Size
  • Automatic Output Power Ramping
  • Configurable Data Rates: 0 to 200 kbps
  • Supported Modulation Formats: 2-FSK,
    2-GFSK, 4-FSK, 4-GFSK, MSK, OOK
  • WaveMatch: Advanced Digital Signal Processing for Improved Sync Detect Performance
  • RoHS-Compliant 5-mm x 5-mm No-Lead QFN
    32-Pin Package (RHB)
  • Regulations – Suitable for Systems Targeting Compliance With
    • Europe: ETSI EN 300 220 Category 1, ETSI EN 54-25, ETSI EN 300 113, and EN 301 166
    • US: FCC CFR47 Part 15, 24, 90, 101
    • Japan: ARIB RCR STD-T30, T-67, T-108
  • Peripherals and Support Functions
    • eWOR Functionality for Automatic Low-Power Receive Polling
    • Includes Functions for Antenna Diversity Support
    • Support for Retransmissions
    • Support for Auto-Acknowledge of Received Packets
    • TCXO Support and Control, also in Power Modes
    • Automatic Clear Channel Assessment (CCA) for Listen-Before-Talk (LBT) Systems
    • Built-in Coding Gain Support for Increased Range and Robustness
    • Digital RSSI Measurement
    • Temperature Sensor

The CC1125 device is a fully integrated single-chip radio transceiver designed for high performance at very low-power and low-voltage operation in cost-effective wireless systems. All filters are integrated, thus removing the need for costly external SAW and IF filters. The device is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 164–192 MHz, 274–320 MHz, 410–480 MHz, and 820–960 MHz.

The CC1125 device provides extensive hardware support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication, and Wake-On-Radio. The main operating parameters of the CC1125 device can be controlled through an SPI interface. In a typical system, the CC1125 device will be used with a microcontroller and only a few external passive components.

The CC1125 device is a fully integrated single-chip radio transceiver designed for high performance at very low-power and low-voltage operation in cost-effective wireless systems. All filters are integrated, thus removing the need for costly external SAW and IF filters. The device is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 164–192 MHz, 274–320 MHz, 410–480 MHz, and 820–960 MHz.

The CC1125 device provides extensive hardware support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication, and Wake-On-Radio. The main operating parameters of the CC1125 device can be controlled through an SPI interface. In a typical system, the CC1125 device will be used with a microcontroller and only a few external passive components.
filter Andere Sub-1-GHz-Transceiver suchen
Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

open-in-new Alternativen vergleichen
Selbe Funktionalität wie der verglichene Baustein bei gleicher Anschlussbelegung
CC1120 AKTIV Hochleistungsfähiger drahtloser Sub-1 GHz-Transceiver für Schmalbandsysteme CC1120 does not have the same RX filter bandwidth.

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 30
Top-Dokumentation Typ Titel Format-Optionen Datum
* Data sheet CC1125 Ultra-High Performance RF Narrowband Transceiver datasheet (Rev. E) PDF | HTML 29 Sep 2014
* Errata CC112x, CC1175 Silicon Errata (Rev. D) 24 Apr 2015
* User guide CC112x/CC1175 Low-Power High Performance Sub-1 GHz RF Transceivers User’s Guide (Rev. E) 26 Sep 2013
Application note DN035 -- Antenna Quick Guide (Rev. B) 09 Feb 2022
Application note Debugging Communication Range (Rev. A) PDF | HTML 23 Mai 2019
Application note DN403 -- CC112x/CC120x On-Chip Temperature Sensor (Rev. D) 24 Okt 2018
Application note CC-Antenna-DK2 and Antenna Measurements Summary (Rev. A) 02 Okt 2017
Application note Achieving Optimum Radio Range (Rev. A) 05 Sep 2017
User guide CC112x TI-SIGFOX SDK Demo Getting Started User’s Guide 27 Mai 2016
Application note CC1125 Boosterpack for 868/915MHz – BOOSTXL-CC1125 09 Mai 2016
Technical article Long-range Sub-1 GHz connectivity in the real world PDF | HTML 04 Dez 2015
White paper Diversifying the IoT with Sub-1 GHz technology 04 Nov 2015
Application note CC112x-CC1190 Boost Software Examples 19 Okt 2015
Application note CC1120-CC1190 BoosterPack 05 Okt 2015
Application note Asynchronous channel hopping system for FCC 15.247 compliance 07 Jul 2015
Technical article UNB (ultra-narrow band) long range communication for a smarter City PDF | HTML 24 Apr 2015
Application note TI LPRF EASYMODE 12 Dez 2014
Application note CC112X/CC120X On-Chip Battery Monitor 03 Dez 2014
Application note Antenna Diversity 23 Okt 2014
Application note CC112x/CC120x RX Sniff mode with Smart Preamble 23 Okt 2013
Application note CC112x/CC120x RX Sniff Mode (Rev. A) 09 Okt 2013
Application note AN112 -- Using CC1190 Front End With CC112x/CC120x Under EN 300 220 (Rev. C) 21 Jun 2013
Application note AN110 – Using CC1190 Front End with CC112x/CC120x under FCC 15.247 (Rev. B) 13 Jun 2013
Application note AN115 -- CC112x/CC1175/CC120x Operation in 274-320 MHz Frequency Band (Rev. A) 13 Jun 2013
Application note AN122 – CC1125 Operating in 25 kHz Channels at 869 MHz ETSI Category 1 21 Mär 2013
Application note AN121 – Wireless M-Bus Implementation with CC112x/CC120x High Performance Transc 20 Feb 2013
Application note DN510 -- CC112X RSSI and CS Response Time 05 Dez 2012
Application note DN038 -- Miniature Helical PCB Antenna for 868 MHz or 915/920 MHz 27 Nov 2012
Application note DN040 -- Reduced Battery Current Using CC112x, CC1175_and CC1200 with TPS62730 02 Okt 2012
Application note DN039 -- IPC for 868/915 MHz operation with the CC112x, CC117x and CC12xx 20 Aug 2012

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

BOOSTXL-CC1125 — CC1125-BoosterPack für Anwendungen mit 868/915 MHz

Das CC1125-BoosterPack™-Modul ist für die Verwendung mit den MSP-EXP430F5529- und MSP-EXP430G2553-LauchPad-Entwicklungskits und für den Betrieb als eigenständiges Modul unter Verwendung der Anwendungssoftware SmartRF Studio ausgelegt.  Das Modul ist mit einer integrierten PCB-Trace-Antenne (...)

Nicht verfügbar auf TI.com
Evaluierungsplatine

SMARTRFTRXEBK — SmartRF-Transceiver-Evaluierungsplatine

The SmartRF Transceiver Evaluation Board (TrxEB) is intended to be used together with Texas Instruments’ low-power RF transceivers for evaluation, performance testing and software development.

The following transceiver evaluation modules are supported:

  • CC1101EM*
  • CC11xLEM*
  • CC112xEM*
  • CC1175EM*
  • CC1200EM*
  • (...)
Benutzerhandbuch: PDF
Nicht verfügbar auf TI.com
Evaluierungsplatine

RDCR-3P-RADIO-MOD — Integrierte Radiocrafts-Funkmodule

Radiocrafts’ standard RF modules provide compact, easy-to-use, low cost, low power and high-performance RF solutions for a large number of wireless applications using license-free ISM bands (169 MHz – 2.4 GHz). Using modules, OEM manufacturers without RF design knowledge can easily add (...)
Von: Radiocrafts AS
Partner-Website besuchen
Debug-Tastkopf

CC-DEBUGGER — Debugger und Programmiersystem für RF-System-on-Chips

The CC Debugger is a small programmer and debugger for the TI Low Power RF System-on-Chips. It can be used together with IAR Embedded Workbench for 8051 (version 7.51A or later) for debugging and SmartRF Flash Programmer for flash programming. The CC Debugger can also be used for controlling (...)

Benutzerhandbuch: PDF
Nicht verfügbar auf TI.com
Entwicklungskit

CC1125DK — CC1125-Entwicklungskit

The CC1125 development kit provides a complete hardware performance testing and software development platform for TI's Sub-1 GHz Performance Line devices and CC1125 specifically. The development kit comes with a pre-programmed packet error rate test.

RF range and robustness can be tested with (...)

Benutzerhandbuch: PDF
Nicht verfügbar auf TI.com
Schnittstellenadapter

BOOST-CCEMADAPTER — EM Adapter BoosterPack

The purpose of the EM adapter board is to provide an-easy-to-use bridge between any of the TI MCU LaunchPads and the wide variety of TI RF evaluation modules (EM), for instance the CCxxxx Low-Power RF evaluation modules. No specific software is provided, so it is up to the user to write the (...)
Benutzerhandbuch: PDF | HTML
Nicht verfügbar auf TI.com
Codebeispiel oder Demo

SWRC253 — CC112x Software Examples

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware
Herunterladen
Support-Software

PACKET-SNIFFER — SmartRF™ Packet Sniffer 2.18.1

The SmartRF Packet Sniffer is a PC software application that can display and store radio packets captured by a listening RF device. The capture device is connected to the PC via USB. Various RF protocols are supported. The Packet Sniffer filters and decodes packets and displays them in a convenient (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware
Herunterladen
Support-Software

RF-RANGE-ESTIMATOR — RF Range Estimator

This tool is used to calculate a range estimate for indoor and outdoor RF links using TI wireless devices. The outdoor calculation is based upon Line-of-Sight (LOS). For the indoor estimation, construction materials can be selected that are between the Tx and Rx unit. The greater the attenuation (...)
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware
Herunterladen
Support-Software

SWRC219 — TrxEB RF PER Test Software

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware
Herunterladen
CAD/CAE-Symbol

CC112x–CC1190 BoosterPack 915/868 MHz Reference Design (Rev. A)

SWRR145A.ZIP (4039 KB)
Herunterladen
Berechnungstool

PACKET-SNIFFER-2 — SmartRF Packet Sniffer 2

The SmartRF Packet Sniffer is a PC software application that can display and store radio packets captured by a listening RF device. The capture device is connected to the PC via USB. Various RF protocols are supported. The Packet Sniffer filters and decodes packets and displays them in a convenient (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware
Durchsuchen Download-Optionen
Berechnungstool

SMARTRF-STUDIO-7 — SmartRF Studio

SmartRF™ Studio is a Windows application that helps designers of RF systems to easily evaluate the radio at an early stage in the design process for all TI CC1xxx and CC2xxx low-power RF devices. It simplifies generation of the configuration register values and commands, as well as practical (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware
Download-Optionen
Designtool

3P-WIRELESS-MODULES — Suchtool für drahtlose Module von Drittanbietern

Das Suchtool für drahtlose Module von Drittanbietern unterstützt Entwickler dabei, Produkte zu finden, welche ihren Endgerätespezifikationen entsprechen, und produktionsbereite Drathlosmodule zu beschaffen. Die im Suchtool enthaltenen Verkäufer von Drittanbietermodulen sind unabhängige (...)
Herunterladen
Designtool

SIMPLELINK-SUB1GHZ-DESIGN-REVIEWS — Hardware-Designprüfungen für SimpleLink™ CC1xxx-Bausteine

Erste Schritte beim Überprüfungsprozess für das SimpleLink™ Sub-1 GHz-Hardwaredesign:
  • Schritt 1: Bevor Sie eine Überprüfung anfordern, sollten Sie unbedingt die technische Dokumentation und die Ressourcen für Design und Entwicklung durchsehen, die auf der entsprechenden Produktseite verfügbar sind (...)
View Options
Schaltplan

CC1120_CC1190EM_915MHz design files 1.0.1

SWRR089.ZIP (957 KB)
Herunterladen
Schaltplan

CC1120-CC1190EM868 design files

SWRR092.ZIP (942 KB)
Herunterladen
Schaltplan

CC1125EM-CAT1-868RD design files

SWRR097.ZIP (624 KB)
Herunterladen
Schaltplan

CC1125EM 169MHz design files

SWRR100.ZIP (713 KB)
Herunterladen
Schaltplan

CC1125EM 420/470MHz design files

SWRR101.ZIP (713 KB)
Herunterladen
Schaltplan

CC1120 Skyworks EM 30 dBm 915 MHz design files

SWRR110.ZIP (2121 KB)
Herunterladen
Schaltplan

CC1120 Skyworks EM 30 dBm 169 MHz Design Files (Rev. A)

SWRR111A.ZIP (2866 KB)
Herunterladen
Referenzdesigns

TIDC-DSSS868WMBUS-DC — Referenzdesign einer batteriebetriebenen Datenerfassungslösung für wM-Bus-T-/C-Modus und DSSS-codier

TIDC-DSSS868WMBUS-DC ermöglicht die Datenerfassung mit einer Firmware, die für den Empfang von drahtlosen M-Bus (wM-Bus)-Paketen im Transmission-Modus (T) und Compact-Modus (C) bei 868,95 MHz optimiert ist. Zur Verbesserung der Reichweite wird auch ein angepasster DSSS-codierter Paketempfang (...)
Design guide: PDF
Schaltplan: PDF
Referenzdesigns

CC1125EM-868-915-RD — CC1125EM Referenzdesign für 868/915MHz

This RF Layout Reference Design demonstrates good decoupling and layout techniques for a low power RF device operating in the 868 MHz and 915 MHz frequency bands.
Schaltplan: PDF
Referenzdesigns

CC1125EM-868-RD — Referenzdesign für HF-Layout gemäß ETSI Cat 1

This reference design for the CC1125 shows how to successfully do the RF layout and filtering to meet the ETSI Category 1 requirements in the 868 MHz frequency band.
Schaltplan: PDF
Referenzdesigns

TIDC-CC1120-LRM-420-470MHZ — Referenzdesign für drahtlose Sub-1-GHz-Kommunikation über große Reichweite mit dem CC1120 (420 bis 4

Narrowband is an industry standard way to get long range RF communication with higher immunity to interference versus wide band solutions.  Use this reference design to test out the longest range solution from TI for your Internet of Things (IoT) applications.  The tool for 420 to 470 (...)
Benutzerhandbuch: PDF
Schaltplan: PDF
Referenzdesigns

TIDC-CC1120-LRM-868-915MHZ — Referenzdesign für drahtlose Sub-1-GHz-Kommunikation über große Reichweite mit dem CC1120 (868 bis 9

Narrowband is an industry standard way to get long range RF communication with higher immunity to interference versus wide band solutions. Use this reference design to test out the longest range solution from TI for your Internet of Things (IoT) applications. The tool for 868 to 915 MHz uses (...)
Benutzerhandbuch: PDF
Schaltplan: PDF
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
VQFN (RHB) 32 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos