Produktdetails

Operating temperature range (°C) -40 to 85 Rating Catalog
Operating temperature range (°C) -40 to 85 Rating Catalog
VQFN (RHA) 40 36 mm² 6 x 6
  • RF Section
    • Single-Chip 2.4-GHz Radio, Including Embedded ANT Protocol
    • Excellent Link Budget, Enabling Long Range Without External Front-Ends
    • Excellent Output Power (4 dBm)
    • Suitable for Systems Targeting Compliance With Worldwide Radio Frequency
      Regulations: ETSI EN 300 328 and EN 300 440 Class 2 (Europe), FCC CFR47
      Part 15 (US), and ARIB STD-T66 (Japan)
    • Accurate Full-Range RSSI Function, Especially Suited for Accurate Proximity Pairing
  • Layout
    • Few External Components
    • Reference Designs Available
    • 40-Pin, 6-mm × 6-mm QFN Package
  • Low Power
    • Powered Down With Low-Power Times: 1 µA
    • Powered Down Without Timer: 0.5 µA
    • Wide Supply Voltage Range (2 V–3.6 V)
  • ANT Protocol Support
    • Fully Compatible With the ANT and ANT+™ Protocols and Existing ANT Devices
    • Built-In ANT-FS™ Support
    • Easy Connection to Host MCU Through Asynchronous or Synchronous Serial Interface
    • CC2570 Supports One ANT Channel
    • CC2571 Supports Eight ANT Channels
    • Support for Both Public, Private and Managed ANT Networks
    • Support for High-Resolution Proximity Pairing
  • APPLICATIONS
    • Sports and Fitness Equipment
    • Health and Medical Equipment
    • Consumer Health Devices
    • Consumer Electronics

ANT, ANT-FS are trademarks of Dynastream Innovations Inc.

  • RF Section
    • Single-Chip 2.4-GHz Radio, Including Embedded ANT Protocol
    • Excellent Link Budget, Enabling Long Range Without External Front-Ends
    • Excellent Output Power (4 dBm)
    • Suitable for Systems Targeting Compliance With Worldwide Radio Frequency
      Regulations: ETSI EN 300 328 and EN 300 440 Class 2 (Europe), FCC CFR47
      Part 15 (US), and ARIB STD-T66 (Japan)
    • Accurate Full-Range RSSI Function, Especially Suited for Accurate Proximity Pairing
  • Layout
    • Few External Components
    • Reference Designs Available
    • 40-Pin, 6-mm × 6-mm QFN Package
  • Low Power
    • Powered Down With Low-Power Times: 1 µA
    • Powered Down Without Timer: 0.5 µA
    • Wide Supply Voltage Range (2 V–3.6 V)
  • ANT Protocol Support
    • Fully Compatible With the ANT and ANT+™ Protocols and Existing ANT Devices
    • Built-In ANT-FS™ Support
    • Easy Connection to Host MCU Through Asynchronous or Synchronous Serial Interface
    • CC2570 Supports One ANT Channel
    • CC2571 Supports Eight ANT Channels
    • Support for Both Public, Private and Managed ANT Networks
    • Support for High-Resolution Proximity Pairing
  • APPLICATIONS
    • Sports and Fitness Equipment
    • Health and Medical Equipment
    • Consumer Health Devices
    • Consumer Electronics

ANT, ANT-FS are trademarks of Dynastream Innovations Inc.

The CC2570 and CC2571 are ANT RF network processors that implement the easy-to-use, power-efficient ANT protocol. The CC2570 supports one ANT channel, whereas the CC2571 supports eight ANT channels. The CC2570/71 can be connected to a host MCU (such as an MSP430) through a UART or SPI serial interface and accessed through a set of API calls. The majority of the ANT protocol is built into the CC2570/71, including the ANT-FS file system functionality; only the application and profile layers must reside on the host MCU, thus keeping host MCU memory requirements to a minimum.

The ANT protocol has been designed to be very power-efficient, yet is flexible enough to support various network topologies (point-to-point, star, connected star, 1-to-N, and N-to-1) and data transfer modes (broadcast, acknowledged, burst data transfer). Each logical ANT channel can be independently configured for one-way or two-way operation, depending on requirements of the application.

The CC2570 and CC2571 are ANT RF network processors that implement the easy-to-use, power-efficient ANT protocol. The CC2570 supports one ANT channel, whereas the CC2571 supports eight ANT channels. The CC2570/71 can be connected to a host MCU (such as an MSP430) through a UART or SPI serial interface and accessed through a set of API calls. The majority of the ANT protocol is built into the CC2570/71, including the ANT-FS file system functionality; only the application and profile layers must reside on the host MCU, thus keeping host MCU memory requirements to a minimum.

The ANT protocol has been designed to be very power-efficient, yet is flexible enough to support various network topologies (point-to-point, star, connected star, 1-to-N, and N-to-1) and data transfer modes (broadcast, acknowledged, burst data transfer). Each logical ANT channel can be independently configured for one-way or two-way operation, depending on requirements of the application.

Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

Ähnliche Funktionalität wie verglichener Baustein
CC2570 AKTIV 1-Kanal-ANT™ HF-Netzwerkprozessoren This product offers 1-channel ANT.

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 4
Typ Titel Datum
* Data sheet CC2570, CC2571 1- and 8-channel ANT™ RF Network Processors datasheet (Rev. A) 16 Mär 2011
Application note AN081 -- Johanson Technology Balun Optimized for CC253X, CC254X, CC257X, CC853X (Rev. B) 06 Nov 2012
Application note AN107 - Murata Balun for CC253x and CC254x, LFB182G45BG2D280 (Rev. A) 26 Okt 2011
More literature Ant Brochure 20 Sep 2010

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
VQFN (RHA) 40 Ultra Librarian

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos