DLPA3000
DLP®-PMIC/LED-Treiber für DLP3010 (0,3 720p) DMD
DLPA3000
- High-efficiency, high-current RGB LED driver
- Integrated buck converter enables up to 6-A LED driver current
- RGB MOSFET switches for channel selection with very low on-resistance
- 10-bit programmable current per channel
- Inputs for selecting color-sequential RGB LEDs
- Generation of DMD high-voltage supplies
- Two high-efficiency buck converters to generate the DLPC343x and DMD supply
- Onehigh-efficiency, 8-bit programmable buck converter for FAN driver application or general power supply. General purpose buck2 (PWR6) is currently supported.
- Two LDOs supplying auxiliary voltages
- Analog MUX for measuring internal and external nodes such as a thermistor and reference levels
- Monitoring/protections: thermal shutdown, hot die, low-battery, and undervoltage lockout (UVLO)
The DLPA3000 is a highlyintegrated power management IC optimized for DLP Pico Projector systems. The device is targeting accessory applications up to several hundreds of lumens.
The DLPA3000 supports LED projectors up to 6 A per LED, enabled by an integrated high efficiency buck converter. Additionally, the low-ohmic RGB switches support the sequencing of red, green, and blue LEDs. The DLPA3000 contains five buck converters with two dedicated for DLPC low-voltage supplies. Another dedicated regulating supply generates the three timing-critical DC supplies for the DMD: V BIAS, V RST, and V OFS.
The DLPA3000 contains several auxiliary blocks that can be used in a flexible way. This enables a tailor-made Pico projector system. One 8-bit programmable buck converter can be used, for example, to drive the projector FAN or to make auxiliary supply lines. General purpose buck2 (PWR6) is currently supported. Two LDOs can be used for a lower-current supply of up to 200 mA. These LDOs are predefined to 2.5 V and 3.3 V.
Technische Dokumentation
Design und Entwicklung
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
DLPDLCR3010EVM-G2 — DLP LightCrafter Display 3010EVM-G2
DLP-PICO-FW-SEL — DLP® Pico™ Firmware-Auswahltool
DMD-DIFFRACTION-EFFICIENCY-CALCULATOR — Calculator helps model DMD diffraction patterns and diffraction efficiency
Unterstützte Produkte und Hardware
Produkte
Mehrkanal-ICs (PMICs)
DMDs für Heimkino, Unternehmen & Bildungswesen
Tragbare DMDs & Verbraucher-DMDs
UV-DMDs (<420 nm)
Pro-AV- & Großraum-DMDs
Außenbeleuchtungs- & Projektions-DMDs
NIR-DMDs (>700 nm)
DMDs für Displays im Innenraum
DMDs für sichtbare Spektren (420 bis 700 nm)
DLP-Controller & -Treiber
Hardware-Entwicklung
Evaluierungsplatine
Entwicklungskit
Support-Software
DLP-OMM-SEARCH — Suchtool für optische Module von DLP®-Produkten
DLP-OPTICAL-DESIGN — DLP-OPTICAL-DESIGN-GUIDELINES
Unterstützte Produkte und Hardware
Produkte
Mehrkanal-ICs (PMICs)
DMDs für Heimkino, Unternehmen & Bildungswesen
Tragbare DMDs & Verbraucher-DMDs
UV-DMDs (<420 nm)
Pro-AV- & Großraum-DMDs
Außenbeleuchtungs- & Projektions-DMDs
NIR-DMDs (>700 nm)
DMDs für Displays im Innenraum
DMDs für sichtbare Spektren (420 bis 700 nm)
DLP-Controller & -Treiber
Hardware-Entwicklung
Evaluierungsplatine
Entwicklungskit
Support-Software
TIDA-080002 — Referenzdesign für ultramobiles, energieeffizientes DLP® Pico™ qHD-Display
TIDA-080000 — Referenzdesign für mobile 1080p-Displays mit DLP® 0,33-Zoll-Mikrospiegelarray
TIDA-01571 — Referenzdesign für tragbares, energieeffizientes HD-Display mit erhöhter Helligkeit mit DLP®-Technol
PMP40069 — Tragbarer DLP Pico-Projektor mit 5–20 Vin, 3-Zellen-Batterielader – Referenzdesign
TIDA-00722 — Echtzeit-Farbmanagement-Referenzdesign mit MSP430 für TI DLP® Pico™-Projektor
| Gehäuse | Pins | CAD-Symbole, Footprints und 3D-Modelle |
|---|---|---|
| HTQFP (PFD) | 100 | Ultra Librarian |
Bestellen & Qualität
- RoHS
- REACH
- Bausteinkennzeichnung
- Blei-Finish/Ball-Material
- MSL-Rating / Spitzenrückfluss
- MTBF-/FIT-Schätzungen
- Materialinhalt
- Qualifikationszusammenfassung
- Kontinuierliches Zuverlässigkeitsmonitoring
- Werksstandort
- Montagestandort
Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.
Support und Schulungen
TI E2E™-Foren mit technischem Support von TI-Ingenieuren
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.