Startseite Motortreiber Schrittmotortreiber
Startseite
Motortreiber
Schrittmotortreiber

DRV8847

AKTIV

Dual H-Brückenmotortreiber für 18 V, 2 A, mit Stromregelung & unabhängiger Halbbrückensteuerung

Jetzt bestellen
Datenblatt

DRV8847

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Number of full bridges 2 Vs (min) (V) 2.7 Vs ABS (max) (V) 20 Full-scale current (A) 1 Peak output current (A) 2 RDS(ON) (HS + LS) (mΩ) 1000 Sleep current (µA) 1.7 Control mode Independent 1/2-Bridge Control interface Hardware (GPIO), I2C Features Current Regulation, Open-Load Detection Rating Catalog Operating temperature range (°C) -40 to 125
Number of full bridges 2 Vs (min) (V) 2.7 Vs ABS (max) (V) 20 Full-scale current (A) 1 Peak output current (A) 2 RDS(ON) (HS + LS) (mΩ) 1000 Sleep current (µA) 1.7 Control mode Independent 1/2-Bridge Control interface Hardware (GPIO), I2C Features Current Regulation, Open-Load Detection Rating Catalog Operating temperature range (°C) -40 to 125
HTSSOP (PWP) 16 32 mm² 5 x 6.4 TSSOP (PW) 16 32 mm² 5 x 6.4 WQFN (RTE) 16 9 mm² 3 x 3
  • Dual H-bridge motor driver
    • Single or dual-brushed DC motors
    • One bipolar stepper motor
    • Solenoid loads
  • 2.7-V to 18-V operating voltage range
  • High output current per H-bridge
    • 1-A RMS driver current at T A = 25°C
    • 2-A RMS driver current in parallel mode at T A = 25°C
  • Low on-state resistance at VM > 5-V
    • 1000 mΩ R DS(ON) (HS + LS) at T A = 25°C
  • Multiple control interface options
    • 4-Pin interface
    • 2-Pin interface
    • Parallel bridge interface
    • Independent bridge interface
  • Current regulation with 20-µs fixed off-time
  • Torque scalar for scaling output current to 50%
  • Supports 1.8-V, 3.3-V, 5-V logic inputs
  • Low-power sleep mode
    • 1.7-µA Sleep mode supply current at V VM = 12-V, T A = 25°C
  • I 2C Device Variant Available (DRV8847S)
    • Detailed diagnostics on I 2C registers
    • Multi-slave operation support
    • Supports standard and fast I 2C mode
  • Small packages and footprints
    • 16 Pin TSSOP (no thermal pad)
    • 16 Pin HTSSOP PowerPAD™ package
    • 16 Pin WQFN thermal package
  • Built-in protection features
    • VM undervoltage lockout
    • Overcurrent protection
    • Open load detection
    • Thermal shutdown
    • Fault condition indication pin (nFAULT)
  • Dual H-bridge motor driver
    • Single or dual-brushed DC motors
    • One bipolar stepper motor
    • Solenoid loads
  • 2.7-V to 18-V operating voltage range
  • High output current per H-bridge
    • 1-A RMS driver current at T A = 25°C
    • 2-A RMS driver current in parallel mode at T A = 25°C
  • Low on-state resistance at VM > 5-V
    • 1000 mΩ R DS(ON) (HS + LS) at T A = 25°C
  • Multiple control interface options
    • 4-Pin interface
    • 2-Pin interface
    • Parallel bridge interface
    • Independent bridge interface
  • Current regulation with 20-µs fixed off-time
  • Torque scalar for scaling output current to 50%
  • Supports 1.8-V, 3.3-V, 5-V logic inputs
  • Low-power sleep mode
    • 1.7-µA Sleep mode supply current at V VM = 12-V, T A = 25°C
  • I 2C Device Variant Available (DRV8847S)
    • Detailed diagnostics on I 2C registers
    • Multi-slave operation support
    • Supports standard and fast I 2C mode
  • Small packages and footprints
    • 16 Pin TSSOP (no thermal pad)
    • 16 Pin HTSSOP PowerPAD™ package
    • 16 Pin WQFN thermal package
  • Built-in protection features
    • VM undervoltage lockout
    • Overcurrent protection
    • Open load detection
    • Thermal shutdown
    • Fault condition indication pin (nFAULT)

The DRV8847 device is a dual H-bridge motor driver for industrial applications, home appliances, ePOS printers, and other mechatronic applications. This device can be used for driving two DC motors, a bipolar stepper motor, or other loads such as relays. A simple PWM interface allows an easy interface with the controller. The DRV8847 device operates off a single power supply and supports a wide input supply range from 2.7 to 18 V.

The output stage of the driver consists of N-channel power MOSFETs configured as two full H-bridges to drive motor windings or four independent half bridges (in an independent bridge interface). A fixed off time controls the peak current in the bridge which can drive a 1-A load (2-A in parallel mode with proper heat sinking, at 25°C T A).

A low-power sleep mode is provided to achieve a low quiescent current draw by shutting down much of the internal circuitry. Additionally, a torque scalar is provided which dynamically scales the output current through a digital input pin. This feature lets the controller decrease the current required for lower power consumption.

Internal protection functions are provided for undervoltage-lockout, overcurrent protection on each FET, short circuit protection, open-load detection, and overtemperature. Fault conditions are indicated by the nFAULT pin. The I 2C device variant (DRV8847S) has detailed diagnostics.

The DRV8847 device is a dual H-bridge motor driver for industrial applications, home appliances, ePOS printers, and other mechatronic applications. This device can be used for driving two DC motors, a bipolar stepper motor, or other loads such as relays. A simple PWM interface allows an easy interface with the controller. The DRV8847 device operates off a single power supply and supports a wide input supply range from 2.7 to 18 V.

The output stage of the driver consists of N-channel power MOSFETs configured as two full H-bridges to drive motor windings or four independent half bridges (in an independent bridge interface). A fixed off time controls the peak current in the bridge which can drive a 1-A load (2-A in parallel mode with proper heat sinking, at 25°C T A).

A low-power sleep mode is provided to achieve a low quiescent current draw by shutting down much of the internal circuitry. Additionally, a torque scalar is provided which dynamically scales the output current through a digital input pin. This feature lets the controller decrease the current required for lower power consumption.

Internal protection functions are provided for undervoltage-lockout, overcurrent protection on each FET, short circuit protection, open-load detection, and overtemperature. Fault conditions are indicated by the nFAULT pin. The I 2C device variant (DRV8847S) has detailed diagnostics.
filter Andere Schrittmotortreiber suchen
Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

open-in-new Alternativen vergleichen
Drop-In-Ersatz mit gegenüber dem verglichenen Baustein verbesserter Funktionalität
DRV8411A AKTIV Doppel-H-Brücken-Motortreiber, (1,65 bis 11 V, 4 A) mit Stromregelung über IPROPI P2P replacement (with modification) with higher power and IPROPI current regulation. Supports lower voltage.
Selbe Funktionalität wie der verglichene Baustein bei gleicher Anschlussbelegung
DRV8410 AKTIV 1,65 V bis 11 V, 2,5-A Dual-H-Brücken-Motortreiber mit Stromregelung Higher power and lower voltage support
DRV8411 AKTIV Dual-H-Brücken-Motortreiber, 1,65 V bis 11 V, 4 A, mit Stromregelung Higher power and lower voltage support
Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung
DRV8833 AKTIV Zweifacher H-Brücken-Motortreiber, 10,8 V, 2 A, mit Stromregelung Lower voltage support
DRV8833C AKTIV Zweifacher H-Brücken-Motortreiber, 10,8 V, 1 A, mit Stromregelung Lower voltage support and lower current capabilities
Ähnliche Funktionalität wie verglichener Baustein
DRV8220 AKTIV 20-V-, 1,76-A-Brücke mit Auto-Sleep-Modus für gebürsteten Gleichstrommotor 18V, optimized for single H-bridge applications, automatic sleep mode

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 18
Typ Titel Datum
* Data sheet DRV8847 Dual H-Bridge Motor Driver datasheet (Rev. C) PDF | HTML 28 Mär 2023
White paper TI Solutions to Increase Efficiency of Air Conditioner PDF | HTML 15 Jul 2024
Application brief Open Load Detection in Integrated Drivers (Rev. C) PDF | HTML 31 Mär 2022
Application note How to Drive Unipolar Stepper Motor with the DRV8xxx PDF | HTML 03 Dez 2021
Application note Best Practices for Board Layout of Motor Drivers (Rev. B) PDF | HTML 14 Okt 2021
Application note L1 and L2 EV Charger Electric Vehicle Service Equipment Design Considerations (Rev. B) 09 Jun 2021
Technical article Overcoming design challenges for brushed-DC motors in smart sanitation systems PDF | HTML 01 Jul 2020
Technical article Drive unipolar stepper motors as bipolar stepper motors with a simple wiring recon PDF | HTML 09 Apr 2020
White paper How to optimize building and home automation designs for energy efficiency 08 Apr 2020
Technical article Automating smart home blinds, shades and shutters with motor drivers PDF | HTML 02 Jan 2020
Application note Design and Implementation of Stepper Motor Control Over I2C Communication 10 Sep 2018
Application brief Multiple Stepper-Motors Control With Two-Pins 04 Sep 2018
White paper Remote Shut Off in Flow Meters is Instrumental for Smart Utility Deployment 10 Aug 2018
Application brief Small Motors in Large Appliances 20 Jul 2018
Application note PowerPAD™ Thermally Enhanced Package (Rev. H) 06 Jul 2018
EVM User's guide DRV8847EVM and DRV8847SEVM Software User's Guide 18 Jun 2018
EVM User's guide DRV8847EVM User's Guide 13 Jun 2018
Application brief PowerPAD™ Made Easy (Rev. B) 12 Mai 2004

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

DRV8847EVM — DRV8847 Evaluierungsmodul für dreiphasigen PWM-Motortreiber

The DRV8847 evaluation module (EVM) is an application board design to allow easy evaluation of the DRV8847 device. The DRV8847 device is an integrated low voltage dual H-bridge driver and highly-configurable power stage for industrial brushed DC, stepper motor, and solenoid applications. This (...)

Benutzerhandbuch: PDF
Nicht verfügbar auf TI.com
Evaluierungsplatine

DRV8847SEVM — DRV8847S Evaluierungsmodul für dreiphasigen PWM-Motortreiber

The DRV8847S evaluation module (EVM) is an application board design to allow easy evaluation of the DRV8847S device. The DRV8847S device is an integrated low voltage dual H-bridge driver and highly-configurable power stage for industrial brushed DC, stepper motor, and solenoid applications. This (...)

Benutzerhandbuch: PDF
Nicht verfügbar auf TI.com
GUI für Evaluierungsmodul (EVM)

SLVC729 — DRV8847EVM GUI

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
Schrittmotortreiber
DRV8847 — Dual H-Brückenmotortreiber für 18 V, 2 A, mit Stromregelung & unabhängiger Halbbrückensteuerung
Hardware-Entwicklung
Evaluierungsplatine
DRV8847EVM — DRV8847 Evaluierungsmodul für dreiphasigen PWM-Motortreiber DRV8847SEVM — DRV8847S Evaluierungsmodul für dreiphasigen PWM-Motortreiber
Herunterladen
Support-Software

SLVC728 — DRV8847 Software

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
Schrittmotortreiber
DRV8847 — Dual H-Brückenmotortreiber für 18 V, 2 A, mit Stromregelung & unabhängiger Halbbrückensteuerung
Hardware-Entwicklung
Evaluierungsplatine
DRV8847EVM — DRV8847 Evaluierungsmodul für dreiphasigen PWM-Motortreiber DRV8847SEVM — DRV8847S Evaluierungsmodul für dreiphasigen PWM-Motortreiber
Herunterladen
Referenzdesigns

TIDA-010072 — Referenzdesign zur Luftstrom- und Ventilsteuerung für Beatmungsanwendungen

This reference design provides a compact system design capable of supporting motor acceleration and deceleration up to ±200 kRPM/s, which is a key requirement in many respirator applications. The design supports a number of offboard C2000 controllers including (...)
Design guide: PDF
Schaltplan: PDF
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
HTSSOP (PWP) 16 Ultra Librarian
TSSOP (PW) 16 Ultra Librarian
WQFN (RTE) 16 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos