DS125RT410

AKTIV

Vierfach-Kanal-Retimer mit 9,8 bis 12,5 Gbit/s und adaptivem EQ und CDR

Jetzt bestellen

Datenblatt

document-pdfAcrobat DS125RT410 Low-Power Multi-Rate Quad Channel Retimer datasheet (Rev. A) (Englisch) PDF | HTML

DS125RT410

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Type

Retimer

Number of channels

4

Speed (max) (Gbpp)

12.5

Input compatibility

AC-coupling, CML

Protocols

10G-SR/LR, 40G-SR4/LR4, CPRI, General purpose, Infiniband, Interlaken

Operating temperature range (°C)

-40 to 85

Type

Retimer

Number of channels

4

Speed (max) (Gbpp)

12.5

Input compatibility

AC-coupling, CML

Protocols

10G-SR/LR, 40G-SR4/LR4, CPRI, General purpose, Infiniband, Interlaken

Operating temperature range (°C)

-40 to 85

WQFN (RHS)

48

49 mm² (7 mm × 7 mm)

Each Channel Independently Locks to Data Rates
From 9.8 to 12.5 Gbps and Submultiples
Fast Lock Operation Based on Protocol-Select
Mode
Low Latency (≈ 300 ps)
Adaptive Equalization up to 34-dB Boost at 5 GHz
Adjustable Transmit V_OD: 600 to 1300 mVp-p
Adjustable Transmit De-emphasis to –15 dB
Typical Power Dissipation (EQ+CDR+DE):
150 mW/Channel
Programmable Output Polarity Inversion
Input Signal Detection, CDR Lock Detection and
Indicator
On-Chip Eye Monitor (EOM), PRBS Generator
Single 2.5-V ± 5% Power Supply
SMBus and EEPROM ConfigurationModes
Operating Temperature Range of –40 to 85°C
WQFN 48-Pin 7-mm × 7-mm Package
Easy Pin Compatible Upgrade Between Repeater
and Retimers
- DS100RT410 (EQ+CDR+DE): 10.3125 Gbps
- DS100DF410 (EQ+DFE+CDR+DE):
  10.3125 Gbps
- DS110RT410 (EQ+CDR+DE): 8.5 to
  11.3 Gbps
- DS110DF410 (EQ+DFE+CDR+DE): 8.5 to
  11.3 Gbps
- DS125RT410 (EQ+CDR+DE): 9.8 to
  12.5 Gbps
- DS125DF410 (EQ+DFE+CDR+DE):
  9.8 to 12.5 Gbps
- DS100BR410 (EQ+DE): Up to
  0.3125 Gbps

Each Channel Independently Locks to Data Rates
From 9.8 to 12.5 Gbps and Submultiples
Fast Lock Operation Based on Protocol-Select
Mode
Low Latency (≈ 300 ps)
Adaptive Equalization up to 34-dB Boost at 5 GHz
Adjustable Transmit V_OD: 600 to 1300 mVp-p
Adjustable Transmit De-emphasis to –15 dB
Typical Power Dissipation (EQ+CDR+DE):
150 mW/Channel
Programmable Output Polarity Inversion
Input Signal Detection, CDR Lock Detection and
Indicator
On-Chip Eye Monitor (EOM), PRBS Generator
Single 2.5-V ± 5% Power Supply
SMBus and EEPROM ConfigurationModes
Operating Temperature Range of –40 to 85°C
WQFN 48-Pin 7-mm × 7-mm Package
Easy Pin Compatible Upgrade Between Repeater
and Retimers
- DS100RT410 (EQ+CDR+DE): 10.3125 Gbps
- DS100DF410 (EQ+DFE+CDR+DE):
  10.3125 Gbps
- DS110RT410 (EQ+CDR+DE): 8.5 to
  11.3 Gbps
- DS110DF410 (EQ+DFE+CDR+DE): 8.5 to
  11.3 Gbps
- DS125RT410 (EQ+CDR+DE): 9.8 to
  12.5 Gbps
- DS125DF410 (EQ+DFE+CDR+DE):
  9.8 to 12.5 Gbps
- DS100BR410 (EQ+DE): Up to
  0.3125 Gbps

The DS125RT410 is a four-channel retimer with integrated signal conditioning. The device includes a fully adaptive continuous-time linear equalizer (CTLE), clock and data recovery (CDR), and a transmit de-emphasis (DE) driver to enable data transmission over long, lossy and crosstalk-impaired highspeed serial links to achieve BER < 1 × 10^–15. For channels with a high amount of crosstalk, the DS125DF410 should be used because it has self calibrating 5-tap decision-feedback equalizer (DFE).

Each channel can independently lock to data rate from 9.8 to 12.5 Gbps, and associated subrates (divide by 2, 4, and 8) to support a variety of communication protocols. A 25-MHz crystal oscillator clock is used to speed up the CDR lock process. This clock is not used for training the PLL and does not need to be synchronous with the serial data.

The programmable settings can be applied using the SMBus (I2C) interface, or they can be loaded through an external EEPROM. An on-chip eye monitor and a PRBS generator allow real-time measurement of high-speed serial data for system bring-up or field tuning.

The DS125RT410 is a four-channel retimer with integrated signal conditioning. The device includes a fully adaptive continuous-time linear equalizer (CTLE), clock and data recovery (CDR), and a transmit de-emphasis (DE) driver to enable data transmission over long, lossy and crosstalk-impaired highspeed serial links to achieve BER < 1 × 10^–15. For channels with a high amount of crosstalk, the DS125DF410 should be used because it has self calibrating 5-tap decision-feedback equalizer (DFE).

Each channel can independently lock to data rate from 9.8 to 12.5 Gbps, and associated subrates (divide by 2, 4, and 8) to support a variety of communication protocols. A 25-MHz crystal oscillator clock is used to speed up the CDR lock process. This clock is not used for training the PLL and does not need to be synchronous with the serial data.

The programmable settings can be applied using the SMBus (I2C) interface, or they can be loaded through an external EEPROM. An on-chip eye monitor and a PRBS generator allow real-time measurement of high-speed serial data for system bring-up or field tuning.

filter

Andere Ethernet: Retimer, Redriver und MUX-Puffer suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 2

Top-Dokumentation	Typ	Titel	Format-Optionen	Neueste englische Version herunterladen	Datum
*	Datenblatt	DS125RT410 Low-Power Multi-Rate Quad Channel Retimer datasheet (Rev. A)	PDF \| HTML		28.10.2015
	Anwendungshinweis	Understanding EEPROM Programming for 10G to 12.5G Retimers	PDF \| HTML		13.01.2016

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

DS125DF410EVM — DS125DF410EVM: 9,8 bis 12,5 Gbps, Vierkanal-Retimer mit adaptivem EQ, CDR und DFE – Evaluierungsmodu

The DS125DF410EVM evaluation board lets you examine the advanced signal conditioning capabilities of the DS125DF410 and DS125RT410 devices using SMAs. The board is controlled by a PC using a USB port and the SigCon Architect GUI.

To use the SigCon Architect GUI to control the device, use the (...)

Benutzerhandbuch: PDF

Unterstützte Produkte und Hardware

Vorrätig

Limit:

Zum Bestellen bitte anmelden

lock

Melden Sie sich an, um den Lagerbestand einzusehen

??asset.out-of-stock-ti_de_DE??

Nicht verfügbar

Simulationsmodell