Startseite Audio, Haptik und Piezo Audiowandler Audio-ADCs
Startseite
Audio, Haptik und Piezo
Audiowandler
Audio-ADCs

PCM1851

NICHT FÜR NEUE DESIGNS EMPFOHLEN

Stereo-ADC mit 101 dB Rauschabstand, 6 x 2-Kanal-MUX und PGA

Jetzt bestellen
Datenblatt
PCM1851 wird nicht für neue Designs empfohlen
Dieses Produkt ist weiterhin für Bestandskunden erhältlich. Neue Designs sollten ein alternatives Produkt erwägen.
open-in-new Alternativen vergleichen
Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung
PCM1862 AKTIV 2-kanaliger, softwaregesteuerter Audio-ADC, 103 dB, universelles Frontend PCM1862 has similar performance as PCM1851, but has 8 analog inputs.

PCM1851

NICHT FÜR NEUE DESIGNS EMPFOHLEN
Datenblatt Jetzt bestellen

Produktdetails

Number of ADC channels 2 Sampling rate (max) (kHz) 96 Analog inputs 12 Control interface I2C Digital audio interface I2S, L, R THD+N (dB) -93 ADC SNR (typ) (dB) 101 Rating Catalog Operating temperature range (°C) -40 to 85 Analog outputs 0
Number of ADC channels 2 Sampling rate (max) (kHz) 96 Analog inputs 12 Control interface I2C Digital audio interface I2S, L, R THD+N (dB) -93 ADC SNR (typ) (dB) 101 Rating Catalog Operating temperature range (°C) -40 to 85 Analog outputs 0
TQFP (PJT) 32 81 mm² 9 x 9
  • Multiplexer and Programmable-Gain Amplifier (PGA)
    • 6×2-Channel Single-Ended Inputs
    • Multiplexed Output
    • Maximum Input Level: 2.4 V rms
    • Input Resistance: 50 k, Minimum
    • PGA Gain: 11 to –11 dB Range, 0.5 dB/Step
  • 24-Bit Delta-Sigma Stereo A/D Converter
  • Antialiasing Filter Included
  • Oversampling Decimation Filter
    • Oversampling Frequency: ×64
    • Pass-Band Ripple: ±0.05 dB
    • Stop-Band Attenuation: –65 dB
    • On-Chip High-Pass Filter: 0.91 Hz (48 kHz)
  • High Performance
    • THD+N: 0.0023% (Typically)
    • SNR: 101 dB (Typically)
    • Dynamic Range: 102 dB (Typically)
  • PCM Audio Interface
    • Master/Slave Mode Selectable
    • Data Formats: 24-Bit Left Justified, 24-Bit I2S, 16-, 24-Bit Right Justified
  • Mode Control by Serial Interface:
    • With SPI Control (PCM1850)
    • With I2C Control (PCM1851)
  • Sampling Rate: 16–96 kHz
  • System Clock: 256 fs, 384 fs, 512 fs, 768 fs
  • Dual Power Supplies:
       5 V for Analog, 3.3 V for Digital
  • Package: 32-Pin TQFP
  • Lead-Free Product
  • APPLICATIONS
    • DVD/HDD/DVD+HDD Recorder
    • AV Amplifier Receiver
    • CD Recorder
    • MD Recorder
    • Multi-Track Recorder
    • Electric Musical Instrument
  • Multiplexer and Programmable-Gain Amplifier (PGA)
    • 6×2-Channel Single-Ended Inputs
    • Multiplexed Output
    • Maximum Input Level: 2.4 V rms
    • Input Resistance: 50 k, Minimum
    • PGA Gain: 11 to –11 dB Range, 0.5 dB/Step
  • 24-Bit Delta-Sigma Stereo A/D Converter
  • Antialiasing Filter Included
  • Oversampling Decimation Filter
    • Oversampling Frequency: ×64
    • Pass-Band Ripple: ±0.05 dB
    • Stop-Band Attenuation: –65 dB
    • On-Chip High-Pass Filter: 0.91 Hz (48 kHz)
  • High Performance
    • THD+N: 0.0023% (Typically)
    • SNR: 101 dB (Typically)
    • Dynamic Range: 102 dB (Typically)
  • PCM Audio Interface
    • Master/Slave Mode Selectable
    • Data Formats: 24-Bit Left Justified, 24-Bit I2S, 16-, 24-Bit Right Justified
  • Mode Control by Serial Interface:
    • With SPI Control (PCM1850)
    • With I2C Control (PCM1851)
  • Sampling Rate: 16–96 kHz
  • System Clock: 256 fs, 384 fs, 512 fs, 768 fs
  • Dual Power Supplies:
       5 V for Analog, 3.3 V for Digital
  • Package: 32-Pin TQFP
  • Lead-Free Product
  • APPLICATIONS
    • DVD/HDD/DVD+HDD Recorder
    • AV Amplifier Receiver
    • CD Recorder
    • MD Recorder
    • Multi-Track Recorder
    • Electric Musical Instrument

The PCM1850/1851 is a high-performance, low-cost, single-chip stereo analog-to-digital converter with a single-ended analog front end that consists of a 6-stereo-input multiplexer and wide-range PGA. The PCM1850/1851 includes a delta-sigma modulator with 64-times oversampling, a digital decimation filter and a low-cut filter that removes the dc component of the input signal. For various applications, the PCM1850/1851 supports two modes (master and slave) and four data formats through a serial control interface, SPI for the PCM1850 and I²C for the PCM1851, respectively. The PCM1850/1851 is suitable for a wide variety of cost-sensitive DVD/CD/MD recorder and receiver applications where good performance and operation from a 5-V analog supply and 3.3-V digital supply is required. The PCM1850/1851 is fabricated using a highly advanced CMOS process and is available in a small 32-pin TQFP package.

The PCM1850/1851 is a high-performance, low-cost, single-chip stereo analog-to-digital converter with a single-ended analog front end that consists of a 6-stereo-input multiplexer and wide-range PGA. The PCM1850/1851 includes a delta-sigma modulator with 64-times oversampling, a digital decimation filter and a low-cut filter that removes the dc component of the input signal. For various applications, the PCM1850/1851 supports two modes (master and slave) and four data formats through a serial control interface, SPI for the PCM1850 and I²C for the PCM1851, respectively. The PCM1850/1851 is suitable for a wide variety of cost-sensitive DVD/CD/MD recorder and receiver applications where good performance and operation from a 5-V analog supply and 3.3-V digital supply is required. The PCM1850/1851 is fabricated using a highly advanced CMOS process and is available in a small 32-pin TQFP package.
filter Andere Audio-ADCs suchen
Herunterladen

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Typ Titel Datum
* Data sheet PCM185x: 24-Bit 96-kHx Stereo A/D Converter w/6 x 2-Channel Mux & PGA datasheet 19 Feb 2004

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort