SN65LVDS047

AKTIV

Vierfach-LVDS-Treiber mit Durchfluss-Pinbelegung

Jetzt bestellen

Datenblatt

document-pdfAcrobat LVDS Quad Differential Line Driver datasheet (Rev. B) (Englisch)

SN65LVDS047

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Function

Driver

Protocols

LVDS

Number of transmitters

4

Number of receivers

0

Signaling rate (Mbps)

400

Input signal

CMOS, LVTTL, TTL

Output signal

LVDS

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Function

Driver

Protocols

LVDS

Number of transmitters

4

Number of receivers

0

Signaling rate (Mbps)

400

Input signal

CMOS, LVTTL, TTL

Output signal

LVDS

Rating

Catalog

Operating temperature range (°C)

-40 to 85

SOIC (D)

16

59.4 mm² (9.9 mm × 6 mm)

TSSOP (PW)

16

32 mm² (5 mm × 6.4 mm)

>400 Mbps (200 MHz) Signaling Rates
Flow-Through Pinout Simplifies PCB Layout
300 ps Maximum Differential Skew
Propagation Delay Times 1.8 ns (Typical)
3.3 V Power Supply Design
±350 mV Differential Signaling
High Impedance on LVDS Outputs on Power Down
Conforms to TIA/EIA-644 LVDS Standard
Industrial Operating Temperature Range (–40°C to 85°C)
Available in SOIC and TSSOP Packages

>400 Mbps (200 MHz) Signaling Rates
Flow-Through Pinout Simplifies PCB Layout
300 ps Maximum Differential Skew
Propagation Delay Times 1.8 ns (Typical)
3.3 V Power Supply Design
±350 mV Differential Signaling
High Impedance on LVDS Outputs on Power Down
Conforms to TIA/EIA-644 LVDS Standard
Industrial Operating Temperature Range (–40°C to 85°C)
Available in SOIC and TSSOP Packages

The SN65LVDS047 is a quad differential line driver that implements the electrical characteristics of low-voltage differential signaling (LVDS). This signaling technique lowers the output voltage levels of 5-V differential standard levels (such as EIA/TIA-422B) to reduce the power, increase the switching speeds, and allow operation with a 3.3-V supply rail. Any of the four current-mode drivers will deliver a minimum differential output voltage magnitude of 247 mV into a 100- load when enabled.

The intended application of this device and signaling technique is for point-to-point and multi-drop baseband data transmission over controlled impedance media of approximately 100 . The transmission media may be printed-circuit board traces, backplanes, or cables. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media, the noise coupling to the environment, and other system characteristics.

The SN65LVDS047 is characterized for operation from -40°C to 85°C.

The SN65LVDS047 is a quad differential line driver that implements the electrical characteristics of low-voltage differential signaling (LVDS). This signaling technique lowers the output voltage levels of 5-V differential standard levels (such as EIA/TIA-422B) to reduce the power, increase the switching speeds, and allow operation with a 3.3-V supply rail. Any of the four current-mode drivers will deliver a minimum differential output voltage magnitude of 247 mV into a 100- load when enabled.

The intended application of this device and signaling technique is for point-to-point and multi-drop baseband data transmission over controlled impedance media of approximately 100 . The transmission media may be printed-circuit board traces, backplanes, or cables. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media, the noise coupling to the environment, and other system characteristics.

The SN65LVDS047 is characterized for operation from -40°C to 85°C.

filter

Andere LVDS-, M-LVDS- und PECL-ICs suchen

Herunterladen Video mit Transkript ansehen Video

Top-Dokumentation	Typ	Titel	Format-Optionen	Datum
*	Datenblatt	LVDS Quad Differential Line Driver datasheet (Rev. B)		01.12.2003
	Anwendungshinweis	Introduction to HVDC Architecture and Solutions for Control and Protection (Rev. C)	PDF \| HTML	19.05.2026
	Application brief	LVDS to Improve EMC in Motor Drives		27.09.2018
	Application brief	How Far, How Fast Can You Operate LVDS Drivers and Receivers?		03.08.2018
	Application brief	How to Terminate LVDS Connections with DC and AC Coupling		16.05.2018
	Technischer Artikel	Applications of Low Voltage Differential Signaling (LVDS) in Multifunction and Ind	PDF \| HTML	24.08.2017
	Anwendungshinweis	An Overview of LVDS Technology		05.10.1998

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationsmodell