TPA3130D2

Name: TPA3130D2
Brand: TI
SKU: TPA3130D2
Price: 1.089 USD

AKTIV

Class-D-Audioverstärker mit 15 W Stereo, 30 W Mono, 4,5 bis 26 V Versorgungsspannung, Analogeingang,

Jetzt bestellen

Datenblatt

document-pdfAcrobat TPA3116D2 15-W, 30-W, 50-W Filter-Free Class-D Stereo Amplifier Family With AM Avoidance datasheet (Rev. G) (Englisch) PDF | HTML

TPA3130D2

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Audio input type

Analog Input

Architecture

Class-D

Speaker channels (max)

Stereo

Rating

Catalog

Power stage supply (max) (V)

26

Power stage supply (min) (V)

4.5

Load (min) (Ω)

4

Output power (W)

15

SNR (dB)

102

THD + N at 1 kHz (%)

0.1

Iq (typ) (mA)

20

Control interface

Hardware

Closed/open loop

Closed

Analog supply (min) (V)

4.5

Analog supply voltage (max) (V)

26

PSRR (dB)

70

Operating temperature range (°C)

-40 to 85

Audio input type

Analog Input

Architecture

Class-D

Speaker channels (max)

Stereo

Rating

Catalog

Power stage supply (max) (V)

26

Power stage supply (min) (V)

4.5

Load (min) (Ω)

4

Output power (W)

15

SNR (dB)

102

THD + N at 1 kHz (%)

0.1

Iq (typ) (mA)

20

Control interface

Hardware

Closed/open loop

Closed

Analog supply (min) (V)

4.5

Analog supply voltage (max) (V)

26

PSRR (dB)

70

Operating temperature range (°C)

-40 to 85

HTSSOP (DAP)

32

89.1 mm² 11 x 8.1

Supports Multiple Output Configurations
- 2 × 50 W Into a 4-Ω BTL Load at 21 V (TPA3116D2)
- 2 × 30 W Into a 8-Ω BTL Load at 24 V (TPA3118D2)
- 2 × 15 W Into a 8-Ω BTL Load at 15 V (TPA3130D2)
Wide Voltage Range: 4.5 V to 26 V
Efficient Class-D Operation
- >90% Power Efficiency Combined With Low Idle Loss Greatly Reduces Heat Sink Size
- Advanced Modulation Schemes
Multiple Switching Frequencies
- AM Avoidance
- Master and Slave Synchronization
- Up to 1.2-MHz Switching Frequency
Feedback Power-Stage Architecture With High PSRR Reduces PSU Requirements
Programmable Power Limit
Differential and Single-Ended Inputs
Stereo and Mono Mode With Single-Filter Mono Configuration
Single Power Supply Reduces Component Count
Integrated Self-Protection Circuits Including Overvoltage, Undervoltage, Overtemperature, DC-Detect, and Short Circuit With Error Reporting
Thermally Enhanced Packages
- DAD (32-Pin HTSSOP Pad Up)
- DAP (32-Pin HTSSOP Pad Down)
–40°C to 85°C Ambient Temperature Range

Supports Multiple Output Configurations
- 2 × 50 W Into a 4-Ω BTL Load at 21 V (TPA3116D2)
- 2 × 30 W Into a 8-Ω BTL Load at 24 V (TPA3118D2)
- 2 × 15 W Into a 8-Ω BTL Load at 15 V (TPA3130D2)
Wide Voltage Range: 4.5 V to 26 V
Efficient Class-D Operation
- >90% Power Efficiency Combined With Low Idle Loss Greatly Reduces Heat Sink Size
- Advanced Modulation Schemes
Multiple Switching Frequencies
- AM Avoidance
- Master and Slave Synchronization
- Up to 1.2-MHz Switching Frequency
Feedback Power-Stage Architecture With High PSRR Reduces PSU Requirements
Programmable Power Limit
Differential and Single-Ended Inputs
Stereo and Mono Mode With Single-Filter Mono Configuration
Single Power Supply Reduces Component Count
Integrated Self-Protection Circuits Including Overvoltage, Undervoltage, Overtemperature, DC-Detect, and Short Circuit With Error Reporting
Thermally Enhanced Packages
- DAD (32-Pin HTSSOP Pad Up)
- DAP (32-Pin HTSSOP Pad Down)
–40°C to 85°C Ambient Temperature Range

The TPA31xxD2 series are stereo efficient, digital amplifier power stage for driving speakers up to 100 W / 2 Ω in mono. The high efficiency of the TPA3130D2 allows it to do 2 × 15 W without external heat sink on a single layer PCB. The TPA3118D2 can even run 2 × 30 W / 8 Ω without heat sink on a dual layer PCB. If even higher power is needed the TPA3116D2 does 2 × 50 W / 4 Ω with a small heat-sink attached to its top side PowerPAD. All three devices share the same footprint enabling a single PCB to be used across different power levels.

The TPA31xxD2 advanced oscillator/PLL circuit employs a multiple switching frequency option to avoid AM interferences; this is achieved together with an option of either master or slave option, making it possible to synchronize multiple devices.

The TPA31xxD2 devices are fully protected against faults with short-circuit protection and thermal protection as well as overvoltage, undervoltage, and DC protection. Faults are reported back to the processor to prevent devices from being damaged during overload conditions.

The TPA31xxD2 series are stereo efficient, digital amplifier power stage for driving speakers up to 100 W / 2 Ω in mono. The high efficiency of the TPA3130D2 allows it to do 2 × 15 W without external heat sink on a single layer PCB. The TPA3118D2 can even run 2 × 30 W / 8 Ω without heat sink on a dual layer PCB. If even higher power is needed the TPA3116D2 does 2 × 50 W / 4 Ω with a small heat-sink attached to its top side PowerPAD. All three devices share the same footprint enabling a single PCB to be used across different power levels.

The TPA31xxD2 advanced oscillator/PLL circuit employs a multiple switching frequency option to avoid AM interferences; this is achieved together with an option of either master or slave option, making it possible to synchronize multiple devices.

The TPA31xxD2 devices are fully protected against faults with short-circuit protection and thermal protection as well as overvoltage, undervoltage, and DC protection. Faults are reported back to the processor to prevent devices from being damaged during overload conditions.

open-in-new

Andere Lautsprecherverstärker suchen

Herunterladen Video mit Transkript ansehen Video

Stereo-Audioverstärker der nächsten Generation (10 W) ohne Induktor: TPA3138D2

Stereo-Audioverstärker der nächsten Generation (15 W) mit Hybridmodulation und geringer Leerlaufverlustleistung: TPA3129D2

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 5

	Typ	Titel		Datum
*	Data sheet	TPA3116D2 15-W, 30-W, 50-W Filter-Free Class-D Stereo Amplifier Family With AM Avoidance datasheet (Rev. G)	PDF \| HTML	07 Dez 2017
	Application note	Guidelines for Measuring Audio Power Amplifier Performance (Rev. A)		26 Aug 2019
	Application note	AN-1849 An Audio Amplifier Power Supply Design (Rev. C)		27 Jun 2019
	Application note	AN-1737 Managing EMI in Class D Audio Applications (Rev. A)		01 Mai 2013
	User guide	2x15W Class D Stereo Amplifier with AM Avoidance (Rev. A)		03 Jan 2013

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPA3130D2EVM — TPA3130D2-Evaluierungsmodul

The TPA3130D2 evaluation module consists of a single 15-W, Class-D, stereo audio power amplifier complete with a small number of external components mounted on a circuit board that can be used to directly drive a speaker with an external analog audio source as the input. The EVM’s default output (...)

Benutzerhandbuch: PDF

Nicht verfügbar auf TI.com

Simulationsmodell

TPA3130D2 TINA-TI Average Reference Design

SLOM316.TSC (101 KB) - TINA-TI Reference Design

Herunterladen

Simulationsmodell

TPA3130D2 TINA-TI Average Spice Model

SLOM317.ZIP (34 KB) - TINA-TI Spice Model

Herunterladen

Simulationsmodell

TPA3130D2 TINA-TI Reference Design

SLOM307.TSC (85 KB) - TINA-TI Reference Design

Herunterladen

Simulationsmodell

TPA3130D2 TINA-TI Spice Model

SLOM306.ZIP (39 KB) - TINA-TI Spice Model

Herunterladen

Simulationsmodell

TPA3130D2 Unencrypted PSpice Average Model Package (Rev. A)

SLOM315A.ZIP (19 KB) - PSpice Model

Herunterladen

Simulationsmodell

TPA3130D2 Unencrypted PSpice Model Package (Rev. A)

SLOM308A.ZIP (19 KB) - PSpice Model

Herunterladen

Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)

Anfordern

Referenzdesigns

PMP9491 — Audio-Boom-Box/Tragbares Stereogerät-Referenzdesign mit effizientem Aufwärtswandler

PMP9491 is a 30W highly efficient and compact Portable Speaker/Audio Boom Box reference Design which can be used in 15W +15W Stereo or 30W Woofer Applications. The Power Source for the Design is 1 or 2 Li ion in Series . The design is broadly divided into three main stages:

Highly efficient (...)

Test report: PDF

Schaltplan: PDF

Gehäuse	Pins	Herunterladen
HTSSOP (DAP)	32	Optionen anzeigen

Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

TPA3130D2

Class-D-Audioverstärker mit 15 W Stereo, 30 W Mono, 4,5 bis 26 V Versorgungsspannung, Analogeingang,

TPA3130D2

Produktdetails

Technische Dokumentation

Design und Entwicklung

TPA3130D2EVM — TPA3130D2-Evaluierungsmodul

TPA3130D2 TINA-TI Average Reference Design

TPA3130D2 TINA-TI Average Spice Model

TPA3130D2 TINA-TI Reference Design

TPA3130D2 TINA-TI Spice Model

TPA3130D2 Unencrypted PSpice Average Model Package (Rev. A)

TPA3130D2 Unencrypted PSpice Model Package (Rev. A)

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PMP9491 — Audio-Boom-Box/Tragbares Stereogerät-Referenzdesign mit effizientem Aufwärtswandler

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Videoreihe

Videos