Designtool
TPA3245
Class-D-Audioverstärker mit Analogeingang, 115 W Stereo, 230 W Mono, 12 bis 31,5 V Versorgungsspannu
Datenblatt
TPA3245
- Differential Analog Inputs
- Total Output Power at 10%THD+N
- 115-W Stereo into 4 Ω in BTL Configuration
- 145-W Stereo into 3 Ω in BTL Configuration
- 230-W Mono into 2 Ω in PBTL Configuration
- Total Output Power at 1%THD+N
- 95-W Stereo into 4 Ω in BTL Configuration
- 115-W Stereo into 3 Ω in BTL Configuration
- 185-W Mono into 2 Ω in PBTL Configuration
- Advanced Integrated Feedback Design with High-speed Gate Driver Error Correction
(PurePath™ Ultra-HD)- Signal Bandwidth up to 100 kHz for High Frequency Content From HD Sources
- Ultra Low 0.005% THD+N at 1 W into 4 Ω and <0.01% THD+N to Clipping
- 65 dB PSRR (BTL, No Input Signal)
- <50 µV (A-Weighted) Output Noise
- >112 dB (A Weighted) SNR
- Multiple Configurations Possible:
- Stereo, Mono, 2.1 and 4xSE
- Click and Pop Free Startup and Stop
- 90% Efficient Class-D Operation (4 Ω)
- Wide 12-V to 30-V Supply Voltage Operation
- Self-Protection Design (Including Undervoltage, Overtemperature, Clipping, and Short Circuit Protection) With Error Reporting
- EMI Compliant When Used With Recommended System Design
TPA3245 is a high performance class-D power amplifier that enables true premium sound quality with class-D efficiency. It features an advanced integrated feedback design and proprietary high-speed gate driver error correction (PurePath™ Ultra-HD). This technology allows ultra low distortion across the audio band and superior audio quality. The device is operated in AD-mode, and can drive up to 2 x 115 W into 4-Ω load and 2 x 145 W into 3-Ω load and features a 2 VRMS analog input interface that works seamlessly with high performance DACs such as TI’s PCM5242. In addition to excellent audio performance, TPA3245 achieves both high power efficiency and very low power stage idle losses below 0.45 W. This is achieved through the use of 65 mΩ MOSFETs and an optimized gate driver scheme that achieves significantly lower idle losses than typical discrete implementations.
Technische Dokumentation
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 12 | Typ | Titel | Datum | ||
|---|---|---|---|---|
| * | Data sheet | TPA3245 115-W Stereo, 230-W Mono PurePath™ Ultra-HD Analog-Input Class-D Amplifier datasheet (Rev. A) | PDF | HTML | 26 Okt 2016 |
| Application note | TPA324x and TPA325x Post-Filter Feedback (Rev. A) | 07 Mär 2018 | ||
| More literature | High-Power Audio Amplifiers TPA322x/4x/5x | 01 Dez 2017 | ||
| Application note | Multi-Device Configuration for TPA32xx Amplifiers | 27 Sep 2017 | ||
| Technical article | Professional audio equipment made the most noise at the 2017 NAMM Show | PDF | HTML | 14 Mär 2017 | |
| More literature | TI Automotive External Amplifiers (Rev. A) | 03 Feb 2017 | ||
| More literature | TI Powered Speakers (Rev. A) | 31 Jan 2017 | ||
| User guide | TPA3245 Evaluation Module (Rev. A) | 30 Jan 2017 | ||
| Application note | Class-D Amplifier External Load Diagnostics | 23 Jan 2017 | ||
| Application note | LC Filter Design (Rev. A) | 09 Nov 2016 | ||
| Application note | TPA32xx Analog Input Grounding for Single Ended Inputs | PDF | HTML | 26 Aug 2016 | |
| More literature | High-Power Audio Amplifiers | 14 Jul 2016 |
Design und Entwicklung
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
Evaluierungsplatine
SIDEGIG-GUITAREVM — Plug-in-Modul für Guitar SideGig
The TI Guitar SideGig plug-in module turns TI Audio Class-D amplifier EVM’s into a guitar, bass or musical instrument amplifier. The board features selectable “clean” and “drive” channels for traditional and overdriven guitar sounds. The clean channel offers volume, (...)
Benutzerhandbuch: PDF
Evaluierungsplatine
SIDEGIG-PROTOEVM — Prototyp-Audio-Steckmodul
The TI Prototype Audio Plug-in Module turns TI Audio Class-D amplifier EVM’s into your sandbox. Need to prototype a pre-amplifier circuit or test an opamp with TI Class-D EVMs, then start with the DIY Audio Plug-in Module.
Start your prototype on the included breadboard or solder directly to the (...)
Start your prototype on the included breadboard or solder directly to the (...)
Benutzerhandbuch: PDF
Evaluierungsplatine
SIDEGIG-XOVEREVM — Analoges, aktives Crossover-Audio-Plug-in-Modul
The TI Analog, Active Crossover Audio Plug-in Module turns TI Audio Class-D amplifier EVM’s into a high quality, two-way speaker amplifier. The plug-in module makes it easy to remove the large and expensive passive crossover found in passive loudspeakers and create a biamped, two-way (...)
Benutzerhandbuch: PDF
Evaluierungsplatine
TPA3245EVM — TPA3245 115 W-Stereo/230 W-Mono, Ultra-HD-Analog-In-Audio-Klasse D-Modul
The TPA3245EVM Ultra-HD evaluation module demonstrates the TPA3245DDV integrated circuit from Texas Instruments. The TPA3245DDV is a high-performance class-D amplifier that enables true premium sound quality with high efficiency class-D technology. It features an advanced integrated feedback (...)
Benutzerhandbuch: PDF
Simulationstool
PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool
PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)
| Gehäuse | Pins | Herunterladen |
|---|---|---|
| HTSSOP (DDV) | 44 | Optionen anzeigen |
Bestellen & Qualität
Beinhaltete Information:
- RoHS
- REACH
- Bausteinkennzeichnung
- Blei-Finish/Ball-Material
- MSL-Rating / Spitzenrückfluss
- MTBF-/FIT-Schätzungen
- Materialinhalt
- Qualifikationszusammenfassung
- Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
- Werksstandort
- Montagestandort
Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.
Support und Schulungen
TI E2E™-Foren mit technischem Support von TI-Ingenieuren
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.