Inicio Convertidores de datos Convertidores de datos integrados y de funciones especiales AFE de uso médico AFE para biosensores
Inicio
Convertidores de datos
Convertidores de datos integrados y de funciones especiales
AFE de uso médico
AFE para biosensores

AFE4410

ACTIVO

AFE integrado de baja potencia con FIFO para la monitorización óptica portátil de la frecuencia c

Haga su pedido ahora
Hoja de datos

AFE4410

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Applications Optical-HRM Number of input channels 3 Resolution (Bits) 22 Number of LEDs 4 Interface type I2C, SPI Operating temperature range (°C) -20 to 70 Rating Catalog
Applications Optical-HRM Number of input channels 3 Resolution (Bits) 22 Number of LEDs 4 Interface type I2C, SPI Operating temperature range (°C) -20 to 70 Rating Catalog
DSBGA (YZ) 30 4.8 mm² 2.4 x 2
  • Accurate, Continuous Heart-Rate Monitoring:
    • Up to 100-dB Dynamic Range for Accurate Heart-Rate Detection
    • Low Current for Continuous Operation on a Wearable Device With a Typical Value:
      • 30 µA for an LED, 25 µA for the Receiver
  • Transmitter:
    • 4 LEDs in Common Anode Configurations
    • 8-Bit Programmable LED Current to 200 mA
    • Mode to Fire Two LEDs in Parallel
    • Programmable LED On-Time
    • Simultaneous Support of 3 LEDs for Optimized SpO2, HRM, or Multiwavelength HRM
    • Average Current of 30 µA Adequate for a Typical Heart-Rate Monitoring Scenario:
      • 20-mA Setting, 60-µs Pulse Duration,
        25-Hz Sampling Rate
  • Receiver:
    • Supports 3 Time-Multiplexed PD Inputs
    • 24-Bit Representation of Current Input From PD in Two’s-Complement Format
    • Individual DC Offset Subtraction DAC
      (Up to ±127-µA Range) at TIA Input for Each LED, Ambient
    • Digital Ambient Subtraction at ADC Output
    • Transimpedance Gain: 10 kΩ to 2 MΩ
    • Noise Filtering With Programmable Bandwidth
    • Receiver Operates at Approximately 1-µA/Hz Sampling Rate (Example, 25 µA at 25 Hz)
    • Hardware Power-Down Mode: Approximately 0-µA Current
  • Flexible Pulse Sequencing and Timing Control
  • Clocking Via External Clock or Internal Oscillator
  • FIFO With 128-Sample Depth:
    • Programmable Partitioning Across Phases
  • Pin-Selectable I2C, SPI Interface
  • Operating Temperature Range: –20°C to +70°C
  • 2.6-mm × 2.1-mm, 0.4-mm Pitch DSBGA Package
  • Supplies:
    • Tx: 3 V to 5.25 V
    • Rx: 1.8 V to 1.9 V (LDO Bypass),
      2.0 V to 3.6 V (LDO Enabled)
    • IO: 1.7 V to Rx_SUP
  • Accurate, Continuous Heart-Rate Monitoring:
    • Up to 100-dB Dynamic Range for Accurate Heart-Rate Detection
    • Low Current for Continuous Operation on a Wearable Device With a Typical Value:
      • 30 µA for an LED, 25 µA for the Receiver
  • Transmitter:
    • 4 LEDs in Common Anode Configurations
    • 8-Bit Programmable LED Current to 200 mA
    • Mode to Fire Two LEDs in Parallel
    • Programmable LED On-Time
    • Simultaneous Support of 3 LEDs for Optimized SpO2, HRM, or Multiwavelength HRM
    • Average Current of 30 µA Adequate for a Typical Heart-Rate Monitoring Scenario:
      • 20-mA Setting, 60-µs Pulse Duration,
        25-Hz Sampling Rate
  • Receiver:
    • Supports 3 Time-Multiplexed PD Inputs
    • 24-Bit Representation of Current Input From PD in Two’s-Complement Format
    • Individual DC Offset Subtraction DAC
      (Up to ±127-µA Range) at TIA Input for Each LED, Ambient
    • Digital Ambient Subtraction at ADC Output
    • Transimpedance Gain: 10 kΩ to 2 MΩ
    • Noise Filtering With Programmable Bandwidth
    • Receiver Operates at Approximately 1-µA/Hz Sampling Rate (Example, 25 µA at 25 Hz)
    • Hardware Power-Down Mode: Approximately 0-µA Current
  • Flexible Pulse Sequencing and Timing Control
  • Clocking Via External Clock or Internal Oscillator
  • FIFO With 128-Sample Depth:
    • Programmable Partitioning Across Phases
  • Pin-Selectable I2C, SPI Interface
  • Operating Temperature Range: –20°C to +70°C
  • 2.6-mm × 2.1-mm, 0.4-mm Pitch DSBGA Package
  • Supplies:
    • Tx: 3 V to 5.25 V
    • Rx: 1.8 V to 1.9 V (LDO Bypass),
      2.0 V to 3.6 V (LDO Enabled)
    • IO: 1.7 V to Rx_SUP

TheAFE4410is an analog front-end for optical biosensing applications, such as heart rate monitoring (HRM). The device supports a maximum of four switching light-emitting diodes (LEDs) and a maximum of three photodiodes (PDs). The electrical current from the photodiode is converted into voltage by the transimpedance amplifier (TIA) and digitized using an analog-to-digital converter (ADC). The ADC code is stored in a 128-sample first-in, first-out block (FIFO) with programmable depth. The FIFO can be read out using either an I2C interface or a serial peripheral interface (SPI). The AFE also has a fully integrated LED driver with 8-bit current control. The device has high dynamic range transmit-and-receive circuitry offering a dynamic range of up to 100 dB that enables accurate heart ratesensing. The AFE achieves extremely low current levels by operating an ultralow power (ULP) mode set by using the ENABLE_ULP register bit.

TheAFE4410is an analog front-end for optical biosensing applications, such as heart rate monitoring (HRM). The device supports a maximum of four switching light-emitting diodes (LEDs) and a maximum of three photodiodes (PDs). The electrical current from the photodiode is converted into voltage by the transimpedance amplifier (TIA) and digitized using an analog-to-digital converter (ADC). The ADC code is stored in a 128-sample first-in, first-out block (FIFO) with programmable depth. The FIFO can be read out using either an I2C interface or a serial peripheral interface (SPI). The AFE also has a fully integrated LED driver with 8-bit current control. The device has high dynamic range transmit-and-receive circuitry offering a dynamic range of up to 100 dB that enables accurate heart ratesensing. The AFE achieves extremely low current levels by operating an ultralow power (ULP) mode set by using the ENABLE_ULP register bit.
open-in-new Buscar otro/a AFE para biosensores
Descargar Ver vídeo con transcripción Video

Más información

Hoja de datos completa y otros recursos de diseño están disponibles en NDA. Solicitar ahora

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
AFE44I30 ACTIVO Extremo frontal analógico integrado de potencia ultrabaja (AFE) para la detección biológica óptica p Higher SNR, 6 LEDs, 4 PDs, and improved automatic ambient and LED cancellation.
AFE44S30 ACTIVO Extremo frontal analógico integrado de potencia ultrabaja (AFE) para detección biológica óptica port Higher SNR, 8 LEDs, 4 PDs, and improved automatic ambient and LED cancellation.

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 2
Tipo Título Fecha
* Data sheet AFE4410 Ultra-Small, Integrated AFE With FIFO for Wearable, Continuous Optical Heart-Rate Monitoring and Biosensing datasheet (Rev. B) PDF | HTML 31 jul 2019
Technical article Optical heart-rate sensors for biometric wearables PDF | HTML 03 may 2018

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

AFE4403EVM — AFE integrado AFE4403 para módulo de evaluación de monitores de frecuencia cardiaca y pulsioxímetros

The AFE4403EVM is intended for evaluating the AFE4403 device. The fully integrated AFE is ideally suited for Pulse Oximeter and Heart rate monitoring applications and consists of low noise receive channel, the LED transmit section and diagnostics for sensor and LED fault detection. The AFE4403 has (...)

Guía del usuario: PDF
No disponible en TI.com
Placa de evaluación

AFE4410EVM — AFE integrado AFE4410 con FIFO para el módulo de evaluación de monitorización óptica portátil de la

The AFE4410 is an analog front end (AFE) for optical biosensing applications, such as heart-rate monitoring (HRM) and saturation of peripheral capillary oxygen (SpO2). The device supports four switching light-emitting diodes (LEDs) and three photodiodes. The current from the photodiode is converted (...)

Solicitar
Placa de evaluación

AFE4490SPO2EVM — Extremo frontal analógico integrado (AFE) AFE4490 para módulo de evaluación de pulsioxímetros

The AFE44x0SPO2EVM is intended for evaluating AFE4400 and AFE4490 devices. The family of devices are fully integrated AFE ideally suited for Pulse Oximeter applications and consist of low noise receive channel, the LED transmit section and diagnostics for sensor and LED fault detection. The (...)

Guía del usuario: PDF
No disponible en TI.com
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Solicitar
Paquete Pasadores Descargar
DSBGA (YZ) 30 Ver opciones
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos