INA229-Q1

ACTIVO

Monitor de corriente/tensión/potencia/energía/carga de salida SPI AEC-Q100 ultrapreciso de 85 V y 20

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat INA229-Q1 AEC-Q100, 85-V, 20-Bit, Ultra-Precise Power/Energy/Charge Monitor With SPI Interface datasheet (Rev. A) (Inglés) PDF | HTML

INA229-Q1

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Common-mode voltage (max) (V)

85

Common-mode voltage (min) (V)

-0.3

Digital interface

SPI

Resolution (Bits)

20

Input offset (±) (max) (µV)

1

Input offset drift (±) (max) (µV/°C)

0.01

Input offset drift (±) (typ) (µV/°C)

0.002

Voltage gain (V/V)

1

CMRR (min) (dB)

154

Iq (max) (mA)

1.1

Gain error (%)

0.05

Gain error drift (±) (max) (ppm/°C)

20

Features

Alert Function, Bidirectional, Digital Temp Monitor, Integrated Power Accumulator, Integrated Power Monitor, Low-side Capable, SPI, Ultra precise

Number of channels

1

Power measurement accuracy (%)

0.1

TI functional safety category

Functional Safety-Capable

Rating

Automotive

Operating temperature range (°C)

-40 to 125

Common-mode voltage (max) (V)

85

Common-mode voltage (min) (V)

-0.3

Digital interface

SPI

Resolution (Bits)

20

Input offset (±) (max) (µV)

1

Input offset drift (±) (max) (µV/°C)

0.01

Input offset drift (±) (typ) (µV/°C)

0.002

Voltage gain (V/V)

1

CMRR (min) (dB)

154

Iq (max) (mA)

1.1

Gain error (%)

0.05

Gain error drift (±) (max) (ppm/°C)

20

Features

Alert Function, Bidirectional, Digital Temp Monitor, Integrated Power Accumulator, Integrated Power Monitor, Low-side Capable, SPI, Ultra precise

Number of channels

1

Power measurement accuracy (%)

0.1

TI functional safety category

Functional Safety-Capable

Rating

Automotive

Operating temperature range (°C)

-40 to 125

VSSOP (DGS)

10

14.7 mm² (3 mm × 4.9 mm)

AEC-Q100 qualified for automotive applications:
- Temperature grade 1: –40°C to +125°C, T_A
Functional Safety-Capable
- Documentation available to aid functional safety system design
High-resolution, 20-bit delta-sigma ADC
Current monitoring accuracy:
- Offset voltage: ±1 µV (maximum)
- Offset drift: ±0.01 µV/°C (maximum)
- Gain error: ±0.05% (maximum)
- Gain error drift: ±20 ppm/°C (maximum)
- Common mode rejection: 154 dB (minimum)
Power monitoring accuracy:
- 0.5% full scale, –40°C to +125°C (maximum)
Energy and charge accuracy:
- 1.0% full scale (maximum)
Fast alert response: 75 µs
Wide common-mode range: –0.3 V to +85 V
Bus voltage sense input: 0 V to 85 V
Shunt full-scale differential range: ±163.84 mV / ±40.96 mV
Input bias current: 2.5 nA (maximum)
Temperature sensor: ±1°C (maximum at 25°C)
Programmable resistor temperature compensation
Programmable conversion time and averaging
10-MHz SPI communication interface
Operates from a 2.7-V to 5.5-V supply:
- Operational current: 640 µA (typical)
- Shutdown current: 5 µA (maximum)

AEC-Q100 qualified for automotive applications:
- Temperature grade 1: –40°C to +125°C, T_A
Functional Safety-Capable
- Documentation available to aid functional safety system design
High-resolution, 20-bit delta-sigma ADC
Current monitoring accuracy:
- Offset voltage: ±1 µV (maximum)
- Offset drift: ±0.01 µV/°C (maximum)
- Gain error: ±0.05% (maximum)
- Gain error drift: ±20 ppm/°C (maximum)
- Common mode rejection: 154 dB (minimum)
Power monitoring accuracy:
- 0.5% full scale, –40°C to +125°C (maximum)
Energy and charge accuracy:
- 1.0% full scale (maximum)
Fast alert response: 75 µs
Wide common-mode range: –0.3 V to +85 V
Bus voltage sense input: 0 V to 85 V
Shunt full-scale differential range: ±163.84 mV / ±40.96 mV
Input bias current: 2.5 nA (maximum)
Temperature sensor: ±1°C (maximum at 25°C)
Programmable resistor temperature compensation
Programmable conversion time and averaging
10-MHz SPI communication interface
Operates from a 2.7-V to 5.5-V supply:
- Operational current: 640 µA (typical)
- Shutdown current: 5 µA (maximum)

The INA229-Q1 is an ultra-precise digital power monitor with a 20-bit delta-sigma ADC specifically designed for current-sensing applications. The device can measure a full-scale differential input of ±163.84 mV or ±40.96 mV across a resistive shunt sense element with common-mode voltage support from –0.3 V to +85 V.

The INA229-Q1 reports current, bus voltage, temperature, power, energy and charge accumulation while employing a precision ±0.5% integrated oscillator, all while performing the needed calculations in the background. The integrated temperature sensor is ±1°C accurate for die temperature measurement and is useful in monitoring the system ambient temperature.

The low offset and gain drift design of the INA229-Q1 allows the device to be used in precise systems that do not undergo multi-temperature calibration during manufacturing. Further, the very low offset voltage and noise allow for use in mA to kA sensing applications and provide a wide dynamic range without significant power dissipation losses on the sensing shunt element. The low input bias current of the device permits the use of larger current-sense resistors, thus providing accurate current measurements in the micro-amp range.

The device allows for selectable ADC conversion times from 50 µs to 4.12 ms as well as sample averaging from 1x to 1024x, which further helps reduce the noise of the measured data.

The INA229-Q1 is an ultra-precise digital power monitor with a 20-bit delta-sigma ADC specifically designed for current-sensing applications. The device can measure a full-scale differential input of ±163.84 mV or ±40.96 mV across a resistive shunt sense element with common-mode voltage support from –0.3 V to +85 V.

The INA229-Q1 reports current, bus voltage, temperature, power, energy and charge accumulation while employing a precision ±0.5% integrated oscillator, all while performing the needed calculations in the background. The integrated temperature sensor is ±1°C accurate for die temperature measurement and is useful in monitoring the system ambient temperature.

The low offset and gain drift design of the INA229-Q1 allows the device to be used in precise systems that do not undergo multi-temperature calibration during manufacturing. Further, the very low offset voltage and noise allow for use in mA to kA sensing applications and provide a wide dynamic range without significant power dissipation losses on the sensing shunt element. The low input bias current of the device permits the use of larger current-sense resistors, thus providing accurate current measurements in the micro-amp range.

The device allows for selectable ADC conversion times from 50 µs to 4.12 ms as well as sample averaging from 1x to 1024x, which further helps reduce the noise of the measured data.

filter

Buscar otro/a Monitores de potencia digitales

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new

Comparar alternativas

Pin por pin con la misma funcionalidad que el dispositivo comparado

INA239-Q1

ACTIVO

Monitor AEC-Q100 de corriente/tensión/potencia de salida SPI de 85 V, 16 bits y alta precisión The INA239 has reduced accuracy and functionality at a lower price.

Misma funcionalidad con diferente configuración de pines que el dispositivo comparado

INA228-Q1

ACTIVO

Monitor de corriente/tensión/potencia/energía/carga de salida I²C AEC-Q100 ultrapreciso de 85 V y 20 The INA228 has the same functionality and performance but with an I2C interface

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 12

Documentación principal	Tipo	Título	Opciones de formato	Fecha
*	Hoja de datos	INA229-Q1 AEC-Q100, 85-V, 20-Bit, Ultra-Precise Power/Energy/Charge Monitor With SPI Interface datasheet (Rev. A)	PDF \| HTML	29/06/2021
	Nota sobre la aplicación	Using a PCB Copper Trace as a Current Sense Shunt Resistor (Rev. A)	PDF \| HTML	27/04/2026
	Nota sobre la aplicación	Risks and Prevention of ESD, EOS, and Latch Up Events for Current Sense Amplifiers	PDF \| HTML	18/11/2024
	Nota sobre la aplicación	Digital Interfaces for Current Sensing Devices (Rev. A)	PDF \| HTML	30/09/2021
	Application brief	Integrating the Current Sensing Signal Path (Rev. B)	PDF \| HTML	29/09/2021
	Application brief	Integrated, Current Sensing Analog-to-Digital Converter (Rev. A)	PDF \| HTML	28/09/2021
	Nota sobre la aplicación	Getting Started with Digital Power Monitors (Rev. A)	PDF \| HTML	2/09/2021
	Artículo técnico	Solving the multidecade current-measurement challenge in your 48-V BMS application	PDF \| HTML	14/06/2021
	Application brief	Shunt-Based Current-Sensing Solutions for BMS Applications in HEVs and EVs (Rev. B)	PDF \| HTML	2/02/2021
	Información sobre seguridad funcional	INA2x9-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA	PDF \| HTML	17/07/2020
	Artículo técnico	Understanding current sensing in HEV/EV batteries	PDF \| HTML	2/08/2017
	Application brief	Energy and Power Monitoring with Digital Current Sensors		25/05/2017

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

INA229_239EVM — Módulo de evaluación INA229 y INA239

Este módulo de evaluación (EVM) es una plataforma fácil de usar para evaluar las funciones principales y el rendimiento de INA229 o INA239.

La EVM es compatible con mediciones de corriente de hasta 10 A e incorpora una interfaz gráfica de usuario (GUI) para leer y escribir en los registros del (...)

Guía del usuario: PDF | HTML