Inicio Amplificadores Amplificadores operacionales (op amps) Amplificadores de propósito general
Inicio
Amplificadores
Amplificadores operacionales (op amps)
Amplificadores de propósito general

LF442QML

OBSOLETO

Amplificador operacional doble de entrada JFET y baja potencia

Haga su pedido ahora
Hoja de datos
LF442QML ya no está en producción
Este producto ya no está en producción. Los nuevos diseños deben considerar un producto alternativo.
open-in-new Comparar alternativas
Pin por pin con la misma funcionalidad que el dispositivo comparado
LF412QML ACTIVO Amplificador operacional doble de calidad militar, entrada FET, 30 V y 4 MHz Offers wider bandwidth and lower noise.

LF442QML

OBSOLETO
Hoja de datos Haga su pedido ahora

Detalles del producto

Number of channels 2 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 36 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 6 Rail-to-rail No GBW (typ) (MHz) 1 Slew rate (typ) (V/µs) 1 Vos (offset voltage at 25°C) (max) (mV) 5 Iq per channel (typ) (mA) 0.2 Vn at 1 kHz (typ) (nV√Hz) 35 Rating Military Operating temperature range (°C) to Offset drift (typ) (µV/°C) 7 CMRR (typ) (dB) 95 Iout (typ) (A) 0.0068 Architecture FET
Number of channels 2 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 36 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 6 Rail-to-rail No GBW (typ) (MHz) 1 Slew rate (typ) (V/µs) 1 Vos (offset voltage at 25°C) (max) (mV) 5 Iq per channel (typ) (mA) 0.2 Vn at 1 kHz (typ) (nV√Hz) 35 Rating Military Operating temperature range (°C) to Offset drift (typ) (µV/°C) 7 CMRR (typ) (dB) 95 Iout (typ) (A) 0.0068 Architecture FET
TO-CAN (LMC) 8 80.2816 mm² (8.96 mm × 8.96 mm)
  • 1/10 Supply Current of a LM1458: 400 μA (Max)
  • Low Input Bias Current: 50 pA (Typ)
  • Low Input Offset Voltage: 1 mV (Typ)
  • Low Input Offset Voltage Drift: 7 μV/°C (Typ)
  • High Gain Bandwidth: 1 MHz (Typ)
  • High Slew Rate: 1 V/μs (Typ)
  • Low Noise Voltage for Low Power: 35 nV/√Hz (Typ)
  • Low Input Noise Current: 0.01 pA/√Hz (Typ)
  • High Input Impedance: 1012Ω

All trademarks are the property of their respective owners.

  • 1/10 Supply Current of a LM1458: 400 μA (Max)
  • Low Input Bias Current: 50 pA (Typ)
  • Low Input Offset Voltage: 1 mV (Typ)
  • Low Input Offset Voltage Drift: 7 μV/°C (Typ)
  • High Gain Bandwidth: 1 MHz (Typ)
  • High Slew Rate: 1 V/μs (Typ)
  • Low Noise Voltage for Low Power: 35 nV/√Hz (Typ)
  • Low Input Noise Current: 0.01 pA/√Hz (Typ)
  • High Input Impedance: 1012Ω

All trademarks are the property of their respective owners.

The LF442 dual low power operational amplifier provides many of the same AC characteristics as the industry standard LM1458 while greatly improving the DC characteristics of the LM1458. The amplifier has the same bandwidth, slew rate, and gain (10 kΩ load) as the LM1458 and only draws one tenth the supply current of the LM1458. In addition the well matched high voltage JFET input devices of the LF442 reduce the input bias and offset currents by a factor of 10,000 over the LM1458. A combination of careful layout design and internal trimming ensures very low input offset voltage and voltage drift. The LF442 also has a very low equivalent input noise voltage for a low power amplifier.

The LF442 is pin compatible with the LM1458 allowing an immediate 10 times reduction in power drain in many applications. The LF442 should be used where low power dissipation and good electrical characteristics are the major considerations.

The LF442 dual low power operational amplifier provides many of the same AC characteristics as the industry standard LM1458 while greatly improving the DC characteristics of the LM1458. The amplifier has the same bandwidth, slew rate, and gain (10 kΩ load) as the LM1458 and only draws one tenth the supply current of the LM1458. In addition the well matched high voltage JFET input devices of the LF442 reduce the input bias and offset currents by a factor of 10,000 over the LM1458. A combination of careful layout design and internal trimming ensures very low input offset voltage and voltage drift. The LF442 also has a very low equivalent input noise voltage for a low power amplifier.

The LF442 is pin compatible with the LM1458 allowing an immediate 10 times reduction in power drain in many applications. The LF442 should be used where low power dissipation and good electrical characteristics are the major considerations.
filter Buscar otro/a Amplificadores de propósito general
Descargar

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 2
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos LF442QML Dual Low Power JFET Input Operational Amplifier datasheet (Rev. A) 26/03/2013
* SMD LF442QML SMD 5962-97633 21/06/2016

Pedidos y calidad