Inicio Microcontroladores (MCU) y procesadores Microcontroladores Low-power MCUs
Inicio
Microcontroladores (MCU) y procesadores
Microcontroladores
Low-power MCUs

MSP430FR2111

ACTIVO

MCU de 16 MHz con 4 KB FRAM, 1 KB SRAM, comparador, ADC de 10 bits, UART/SPI, temporizador

Haga su pedido ahora
Hoja de datos
Guías de usuario

Se encuentra disponible una versión más nueva de este producto

open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
MSPM0L1105 ACTIVO MCU Arm® Cortex®-M0+ a 32 MHz de memoria flash de 32 KB, 4 KB de SRAM, ADC de 12 bits Alternate available, lower cost, better features, and performance with MSPM0L1105
MSPM0C1104 ACTIVO MCU Arm® Cortex®-M0+ de 24 MHz con memoria flash de 16 KB, 1 KB de SRAM y ADC de 12 bits 32-bit ARM Cortex-M0+ MCU for cost optimized designs

MSP430FR2111

ACTIVO
Haga su pedido ahora

Detalles del producto

CPU MSP430 Frequency (MHz) 16 Flash memory (kByte) 4 RAM (kByte) 1 ADC type 10-bit SAR Features Real-time clock UART 1 Security Secure debug Number of ADC channels 8 SPI 1 USB No Hardware accelerators 0 Operating temperature range (°C) -40 to 85 Rating Catalog Communication interface SPI, UART Operating system BareMetal (No OS), TI RTOS Nonvolatile memory (kByte) 4 Number of GPIOs 12 Number of I2Cs 0
CPU MSP430 Frequency (MHz) 16 Flash memory (kByte) 4 RAM (kByte) 1 ADC type 10-bit SAR Features Real-time clock UART 1 Security Secure debug Number of ADC channels 8 SPI 1 USB No Hardware accelerators 0 Operating temperature range (°C) -40 to 85 Rating Catalog Communication interface SPI, UART Operating system BareMetal (No OS), TI RTOS Nonvolatile memory (kByte) 4 Number of GPIOs 12 Number of I2Cs 0
TSSOP (PW) 16 32 mm² (5 mm × 6.4 mm) VQFN (RLL) 24 9 mm² (3 mm × 3 mm)
  • Embedded microcontroller
    • 16-bit RISC architecture up to 16 MHz
    • Wide supply voltage range from 3.6 V down to 1.8 V (minimum supply voltage is restricted by SVS levels, see the SVS specifications)
  • Optimized low-power modes (at 3 V)
    • Active mode: 120 µA/MHz
    • Standby
      • LPM3.5 with VLO: 1 µA
      • Real-time clock (RTC) counter (LPM3.5 with 32768-Hz crystal): 1 µA
    • Shutdown (LPM4.5): 34 nA without SVS
  • High-performance analog
    • 8-channel 10-bit analog-to-digital converter (ADC)
      • Integrated temperature sensor
      • Internal 1.5-V reference
      • Sample-and-hold 200 ksps
    • Enhanced comparator (eCOMP)
      • Integrated 6-bit DAC as reference voltage
      • Programmable hysteresis
      • Configurable high-power and low-power modes
  • Low-power ferroelectric RAM (FRAM)
    • Up to 3.75KB of nonvolatile memory
    • Built-in error correction code (ECC)
    • Configurable write protection
    • Unified memory of program, constants, and storage
    • 1015 write cycle endurance
    • Radiation resistant and nonmagnetic
  • Intelligent digital peripherals
    • One 16-bit timer with three capture/compare registers (Timer_B3)
    • One 16-bit counter-only RTC counter
    • 16-bit cyclic redundancy checker (CRC)
  • Enhanced serial communications
    • Enhanced USCI A (eUSCI_A) supports UART, IrDA, and SPI
  • Clock system (CS)
    • On-chip 32-kHz RC oscillator (REFO)
    • On-chip 16-MHz digitally controlled oscillator (DCO) with frequency-locked loop (FLL)
      • ±1% accuracy with on-chip reference at room temperature
    • On-chip very-low-frequency 10-kHz oscillator (VLO)
    • On-chip high-frequency modulation oscillator (MODOSC)
    • External 32-kHz crystal oscillator (LFXT)
    • Programmable MCLK prescalar of 1 to 128
    • SMCLK derived from MCLK with programmable prescalar of 1, 2, 4, or 8
  • General input/output and pin functionality
    • 12 I/Os on 16-pin package
    • 8 interrupt pins (4 pins of P1 and 4 pins of P2) can wake MCU from LPMs
    • All I/Os are capacitive touch I/Os
  • Development tools and software (also see Tools and Software)
  • Family members (also see Device Comparison)
    • MSP430FR2111: 3.75KB of program FRAM, 1KB of RAM
    • MSP430FR2110: 2KB of program FRAM, 1KB of RAM
    • MSP430FR2100: 1KB of program FRAM, 512 bytes of RAM
    • MSP430FR2000: 0.5KB of program FRAM, 512 bytes of RAM
  • Package options
    • 16-pin: TSSOP (PW16)
    • 24-pin: VQFN (RLL)
  • Embedded microcontroller
    • 16-bit RISC architecture up to 16 MHz
    • Wide supply voltage range from 3.6 V down to 1.8 V (minimum supply voltage is restricted by SVS levels, see the SVS specifications)
  • Optimized low-power modes (at 3 V)
    • Active mode: 120 µA/MHz
    • Standby
      • LPM3.5 with VLO: 1 µA
      • Real-time clock (RTC) counter (LPM3.5 with 32768-Hz crystal): 1 µA
    • Shutdown (LPM4.5): 34 nA without SVS
  • High-performance analog
    • 8-channel 10-bit analog-to-digital converter (ADC)
      • Integrated temperature sensor
      • Internal 1.5-V reference
      • Sample-and-hold 200 ksps
    • Enhanced comparator (eCOMP)
      • Integrated 6-bit DAC as reference voltage
      • Programmable hysteresis
      • Configurable high-power and low-power modes
  • Low-power ferroelectric RAM (FRAM)
    • Up to 3.75KB of nonvolatile memory
    • Built-in error correction code (ECC)
    • Configurable write protection
    • Unified memory of program, constants, and storage
    • 1015 write cycle endurance
    • Radiation resistant and nonmagnetic
  • Intelligent digital peripherals
    • One 16-bit timer with three capture/compare registers (Timer_B3)
    • One 16-bit counter-only RTC counter
    • 16-bit cyclic redundancy checker (CRC)
  • Enhanced serial communications
    • Enhanced USCI A (eUSCI_A) supports UART, IrDA, and SPI
  • Clock system (CS)
    • On-chip 32-kHz RC oscillator (REFO)
    • On-chip 16-MHz digitally controlled oscillator (DCO) with frequency-locked loop (FLL)
      • ±1% accuracy with on-chip reference at room temperature
    • On-chip very-low-frequency 10-kHz oscillator (VLO)
    • On-chip high-frequency modulation oscillator (MODOSC)
    • External 32-kHz crystal oscillator (LFXT)
    • Programmable MCLK prescalar of 1 to 128
    • SMCLK derived from MCLK with programmable prescalar of 1, 2, 4, or 8
  • General input/output and pin functionality
    • 12 I/Os on 16-pin package
    • 8 interrupt pins (4 pins of P1 and 4 pins of P2) can wake MCU from LPMs
    • All I/Os are capacitive touch I/Os
  • Development tools and software (also see Tools and Software)
  • Family members (also see Device Comparison)
    • MSP430FR2111: 3.75KB of program FRAM, 1KB of RAM
    • MSP430FR2110: 2KB of program FRAM, 1KB of RAM
    • MSP430FR2100: 1KB of program FRAM, 512 bytes of RAM
    • MSP430FR2000: 0.5KB of program FRAM, 512 bytes of RAM
  • Package options
    • 16-pin: TSSOP (PW16)
    • 24-pin: VQFN (RLL)

MSP430FR2000 and MSP430FR21xx devices are part of the MSP430™ microcontroller (MCU) value line sensing portfolio. This ultra-low-power, low-cost MCU family offers memory sizes from 0.5KB to 4KB of FRAM unified memory with several package options including a small 3-mm×3-mm VQFN package. The architecture, FRAM, and integrated peripherals, combined with extensive low-power modes, are optimized to achieve extended battery life in portable, battery-powered sensing applications. MSP430FR2000 and MSP430FR21xx devices offer a migration path for 8-bit designs to gain additional features and functionality from peripheral integration and the data-logging and low-power benefits of FRAM. Additionally, existing designs using MSP430G2x MCUs can migrate to the MSP430FR2000 and MSP430F21xx family to increase performance and get the benefits of FRAM.

The MSP430FR2000 and MSP430FR21xx MCUs feature a powerful 16-bit RISC CPU, 16-bit registers, and a constant generator that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) also allows the device to wake up from low-power modes to active mode typically in less than 10 µs. The feature set of this MCU meets the needs of applications ranging from appliance battery packs and battery monitoring to smoke detectors and fitness accessories.

The MSP ultra-low-power (ULP) FRAM microcontroller platform combines uniquely embedded FRAM and a holistic ultra-low-power system architecture, allowing system designers to increase performance while lowering energy consumption. FRAM technology combines the low-energy fast writes, flexibility, and endurance of RAM with the nonvolatile behavior of flash.

MSP430FR2000 and MSP430FR21x MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get your design started quickly. Development kits include the MSP-EXP430FR2311 and MSP430FR4133 LaunchPad™ development kit and the MSP‑TS430PW20 20-pin target development board. TI also provides free MSP430Ware™ software, which is available as a component of Code Composer Studio™ IDE desktop and cloud versions within TI Resource Explorer. MSP430 MCUs are also supported by extensive online collateral, such as our housekeeping example series, MSP Academy training, and online support through the TI E2E™ support forums.

For complete module descriptions, see the MSP430FR4xx and MSP430FR2xx Family User’s Guide.

MSP430FR2000 and MSP430FR21xx devices are part of the MSP430™ microcontroller (MCU) value line sensing portfolio. This ultra-low-power, low-cost MCU family offers memory sizes from 0.5KB to 4KB of FRAM unified memory with several package options including a small 3-mm×3-mm VQFN package. The architecture, FRAM, and integrated peripherals, combined with extensive low-power modes, are optimized to achieve extended battery life in portable, battery-powered sensing applications. MSP430FR2000 and MSP430FR21xx devices offer a migration path for 8-bit designs to gain additional features and functionality from peripheral integration and the data-logging and low-power benefits of FRAM. Additionally, existing designs using MSP430G2x MCUs can migrate to the MSP430FR2000 and MSP430F21xx family to increase performance and get the benefits of FRAM.

The MSP430FR2000 and MSP430FR21xx MCUs feature a powerful 16-bit RISC CPU, 16-bit registers, and a constant generator that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) also allows the device to wake up from low-power modes to active mode typically in less than 10 µs. The feature set of this MCU meets the needs of applications ranging from appliance battery packs and battery monitoring to smoke detectors and fitness accessories.

The MSP ultra-low-power (ULP) FRAM microcontroller platform combines uniquely embedded FRAM and a holistic ultra-low-power system architecture, allowing system designers to increase performance while lowering energy consumption. FRAM technology combines the low-energy fast writes, flexibility, and endurance of RAM with the nonvolatile behavior of flash.

MSP430FR2000 and MSP430FR21x MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get your design started quickly. Development kits include the MSP-EXP430FR2311 and MSP430FR4133 LaunchPad™ development kit and the MSP‑TS430PW20 20-pin target development board. TI also provides free MSP430Ware™ software, which is available as a component of Code Composer Studio™ IDE desktop and cloud versions within TI Resource Explorer. MSP430 MCUs are also supported by extensive online collateral, such as our housekeeping example series, MSP Academy training, and online support through the TI E2E™ support forums.

For complete module descriptions, see the MSP430FR4xx and MSP430FR2xx Family User’s Guide.
filter Buscar otro/a Low-power MCUs
Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 52
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos MSP430FR21xx, MSP430FR2000 Mixed-Signal Microcontrollers datasheet (Rev. E) 2/06/2021
* Guía del usuario MSP430FR4xx and MSP430FR2xx Family User's Guide (Rev. I) 13/03/2019
* Errata MSP430FR2111 Microcontroller Errata (Rev. Q) PDF | HTML 21/10/2021
Nota sobre la aplicación Migration Guide From MSP430 MCUs to MSPM0 MCUs (Rev. B) PDF | HTML 2/06/2025
Guía del usuario MSP430 FRAM Devices Bootloader (BSL) User's Guide (Rev. AB) PDF | HTML 22/09/2022
Nota sobre la aplicación ESD Diode Current Specification (Rev. B) PDF | HTML 23/08/2021
Nota sobre la aplicación MSP430 FRAM Technology – How To and Best Practices (Rev. B) 12/08/2021
Nota sobre la aplicación Low-Power Battery Voltage Measurement With MSP430FR MCU On-Chip VREF and ADC (Rev. B) PDF | HTML 2/08/2021
Nota sobre la aplicación Migration from MSP430 FR58xx, FR59xx, and FR6xx to FR4xx and FR2xx (Rev. B) PDF | HTML 2/08/2021
Nota sobre la aplicación Migrating from MSP430 F2xx and G2xx families to MSP430 FR4xx and FR2xx family (Rev. G) PDF | HTML 2/08/2021
Nota sobre la aplicación Designing With the MSP430FR4xx and MSP430FR2xx ADC (Rev. A) PDF | HTML 2/08/2021
Nota sobre la aplicación MSP430 System-Level ESD Considerations (Rev. B) PDF | HTML 14/07/2021
Guía del usuario MSP430 MCUs Development Guide Book (Rev. A) PDF | HTML 13/05/2021
Nota sobre la aplicación MSP430FR2xx and MSP430FR4xx DCO+FLL Application Guide 7/12/2020
Artículo técnico Integrating multiple functions within a housekeeping MSP430 microcontroller PDF | HTML 5/10/2020
Artículo técnico Accelerate your electric mask design PDF | HTML 1/07/2020
Nota sobre la aplicación MSP430 System ESD Troubleshooting Guide PDF | HTML 13/12/2019
Artículo técnico Using smart relay drivers for smart meters, part 2 PDF | HTML 10/12/2018
Application brief EEPROM Emulation Using Low Memory MSP430™ FRAM MCUs (Rev. A) 20/04/2018
Application brief Simple Power Sequencer Using MSP430™ MCUs 19/03/2018
Libro electrónico Enhance simple analog and digital functions for $0.25 (Rev. B) 7/02/2018
Application brief Tamper Detection Using Low-Memory MSP430™ MCUs 26/10/2017
Nota sobre la aplicación Code Porting From MSP430FR2000 to MSP430FR2311 MCUs 25/10/2017
Application brief Dual-Output 8-Bit PWM DAC Using Low-Memory MSP430™ MCUs 20/10/2017
Application brief SPI I/O Expander Using Low-Memory MSP430™ MCUs 19/10/2017
Application brief Voltage Monitor With a Timestamp Using a Low-Memory MSP430™ MCU 19/10/2017
Application brief Multi-Function Reset Controller With Low-Memory MSP430™ MCUs 18/10/2017
Application brief 7-Segment LED Stopwatch Using Low-Memory MSP430™ MCUs 18/10/2017
Application brief Single-Slope Analog-to-Digital Conversion Technique Using MSP430™ MCUs 18/10/2017
Application brief Hysteresis Comparator With UART Using Low-Memory MSP430™ FRAM MCUs 18/10/2017
Application brief Analog Input to PWM Output Using the MSP430™ MCU Enhanced Comparator 18/10/2017
Application brief Programmable System Wake-up Controller Using MSP430™ MCUs 17/10/2017
Application brief Quadrature Encoder Position Counter With MSP430™ MCUs 17/10/2017
Application brief ADC Wake and Transmit on Threshold Using MSP430™ MCUs 17/10/2017
Nota sobre la aplicación Optimizing C Code for Size With MSP430 MCUs: Tips and Tricks 16/10/2017
Application brief Simple RTC-Based System Wake-up Controller Using MSP430™ MCUs 13/10/2017
Application brief UART-to-SPI Bridge Using Low-Memory MSP430™ MCUs 13/10/2017
Application brief UART-to-UART Bridge Using Low-Memory MSP430™ MCUs 9/10/2017
Application brief Programmable Clock Source Using MSP430™ MCUs 28/09/2017
Application brief Servo Motor Controller Using MSP430™ MCUs 27/09/2017
Application brief Programmable Frequency Locked Loop Using MSP430™ MCUs 27/09/2017
Application brief Low -Power Hex Keypad Using MSP430™ MCUs 27/09/2017
Application brief External Programmable Watchdog Timer Using MSP430™ MCUs 26/09/2017
Application brief Stepper Motor Control Using MSP430™ MCUs 26/09/2017
Application brief External RTC With Backup Memory Using a Low-Memory MSP430™ MCU 15/09/2017
Application brief UART Software Controlled RGB LED Color Mixing With MSP430™ MCUs 15/09/2017
Application brief Single-Wire Communication Host With MSP430™ MCUs 15/09/2017
Artículo técnico Sense, measure and more with MSP430™ MCUs at embedded world 2017 PDF | HTML 14/03/2017
Artículo técnico It may be small, but it’s powerful PDF | HTML 27/10/2016
Nota sobre la aplicación VLO Calibration on the MSP430FR4xx and MSP430FR2xx Family (Rev. A) 19/02/2016
Nota sobre la aplicación MSP Code Protection Features PDF | HTML 7/12/2015
Nota sobre la aplicación MSP430 FRAM Quality and Reliability (Rev. A) 1/05/2014

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

ALGO-3P-UISP1-TI — Programador Algocraft μISP1 para dispositivos Texas Instruments

μISP puede funcionar conectado a un PC host (conexiones RS-232, USB y LAN integradas) o en modo independiente.

La ejecución del ciclo de programación en modo independiente puede ocurrir simplemente pulsando el botón de START o a través de algunas líneas de control TTL.

Su tamaño compacto y (...)

Desde: Algocraft
Productos y hardware compatibles
Kit de desarrollo

MSP-EXP430FR2311 — Kit de desarrollo LaunchPad™ MSP430FR2311

El kit de desarrollo MSP-EXP430FR2311 LaunchPad™ es una placa de desarrollo de microcontroladores fácil de utilizar para los MCU MSP430FR2000, MSP430FR21xx y MSP430FR23xx. Incluye todo lo necesario para empezar a desarrollar de forma rápida, incluida la emulación a bordo para programación, (...)

Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Herramienta de programación de hardware

MSP-FET — Programador y depurador de MSP MCU

El MSP-FET es una potente herramienta de desarrollo de emulación, a menudo llamada sonda de depuración, que permite a los usuarios comenzar a desarrollar rápidamente en microcontroladores (MCU) de baja potencia de MSP.

Admite la programación y la depuración en tiempo real a través de las interfaces (...)

Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Herramienta de programación de hardware

ALGO-3P-WRITENOW — Algocraft WriteNow! Programador

¡WriteNow! La serie de programadores en sistema supone un gran avance en el sector de la programación. Los programadores son compatibles con un gran número de dispositivos (microcontroladores, memorias, CPLD y otros dispositivos programables) de diversos fabricantes y tienen un tamaño compacto que (...)

Desde: Algocraft
Productos y hardware compatibles
Kit de desarrollo de software (SDK)

MSP430-SDK — MSP430-SDK para microcontroladores MSP430

MSP430-SDK es una colección de recursos que ayudan a los usuarios a escribir código eficaz para los microcontroladores (MCU) MSP430. Estos recursos son compatibles con TODOS los microcontroladores MSP430. Como mencionó un usuario: “Es esencialmente todo lo que los desarrolladores necesitan para (...)

Productos y hardware compatibles
IDE, configuración, compilador o depurador

CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)

CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)

Productos y hardware compatibles
IDE, configuración, compilador o depurador

IAR-KICKSTART — IAR Embedded Workbench

IAR Embedded Workbench delivers a complete development toolchain for building and debugging embedded applications for your selected target microcontroller. The included IAR C/C++ Compiler generates highly optimized code for your application, and the C-SPY Debugger is a fully integrated debugger for (...)

Desde: IAR Systems
Productos y hardware compatibles
Capacitación en línea

MSP430-ACADEMY — MSP430™ academy

MSP430™ Academy delivers easy-to-use training modules that span a wide range of topics and LaunchPads in the MSP430 MCU portfolio.
Productos y hardware compatibles
Primeros pasos

TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud

From evaluation to deployment the TI Developer Zone provides a comprehensive range of software, tools and training to ensure that you have everything you need for each stage of the development process.
Productos y hardware compatibles
Sistema operativo (SO)

WHIS-3P-SAFERTOS — RTOS de seguridad precertificado SAFERTOS de WITTENSTEIN

SAFERTOS® es un sistema operativo único en tiempo real diseñado para procesadores integrados. Está precertificado según las normas IEC 61508 SIL3 e ISO 26262 ASILD por TÜV SÜD. SAFERTOS® se diseñó específicamente para la seguridad por el equipo de expertos de WHIS y se usa globalmente en (...)

Desde: WITTENSTEIN High Integrity Systems
Productos y hardware compatibles
Ejemplo de código o demostración

MSP430-FUNCTION-CODE-EXAMPLES — MSP430™ Value Line Sensing Function Code Examples

MSP430-FUNCTION-CODE-EXAMPLES es una colección de 25 ejemplos de código para usar con los microcontroladores (MCU) de detección de línea de valor MSP430FR2000, MSP430FR2100, MSP430FR2110 y MSP430FR2111. Estos ejemplos de código permiten a los desarrolladores agregar programabilidad a funciones (...)

Productos y hardware compatibles
Ejemplo de código o demostración

SLAC715 — MSP430FR21xx, MSP430FR2000 code examples

Productos y hardware compatibles
Firmware

MSPFRBOOT — MSPFRBOOT

El cargador de arranque (BSL) de los microcontroladores (MCU) MSP430™ permite que los usuarios se comuniquen con memoria integrada en los MCU MSP durante la fase de creación de prototipos, la producción final y el servicio. Esto se realiza a través de interfaces estándar, como el (...)

Productos y hardware compatibles
Herramienta de programación de software

MSP-GANG-SOFTWARE — MSP-GANG Software

The MSP Gang Programmer (MSP-GANG) is a MSPM0/MSP430/MSP432 device programmer that can program up to eight identical devices at the same time.
Productos y hardware compatibles
Herramienta de programación de software

UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UniFlash forma parte del amplio ecosistema de desarrollo CCStudio™ de TI y es una herramienta de software diseñada para programar la memoria flash integrada en los microcontroladores y dispositivos de conectividad inalámbrica de TI, así como la memoria flash integrada en los procesadores de TI. (...)

Productos y hardware compatibles
Herramienta de diseño

MSP-3P-SEARCH — Herramienta de búsqueda de terceros de MSP

TI has partnered with multiple companies to offer a wide range of solutions and services for TI MSP devices. These companies can accelerate your path to production using MSP devices. Download this search tool to quickly browse third-party details and find the right third-party to meet your needs.

(...)

Productos y hardware compatibles
Diseño de referencia

TIDA-00847 — Diseño de referencia de módulo binario optimizado en tamaño y costo con aislador digital con aliment

Este diseño de referencia muestra la arquitectura optimizada en términos de espacio y costo para un módulo binario de entrada de CC de 4 canales con una precisión de medición e indicación de estado mejorada, utilizando solo dos productos que simplifican el diseño del sistema. El módulo binario (...)
Productos y hardware compatibles
Diseño de referencia

TIDA-050013 — Diseño de referencia de solución de animación LED RGB ultrapequeña para aplicaciones alimentadas por

Este diseño de referencia es una solución de animación LED RGB de 2 cm x 2 cm para aplicaciones alimentadas por batería que utiliza los dispositivos LP5523 y MSP430FR2111. El dispositivo LP5523 es un controlador LED con un motor de control programable en un encapsulado DSBGA. El LP5523 permite (...)
Productos y hardware compatibles
Diseño de referencia

TIDM-FRAM-EEPROM — Emulación y detección EEPROM con microcontroladores FRAM MSP430

Este diseño de referencia describe una implementación para emular memoria de solo lectura programable y borrable eléctricamente (EEPROM) con tecnología memoria de acceso aleatorio ferroelectrica (FRAM) en microcontroladores (MCU) MSP430™ de ultrabajo consumo, combinada con las capacidades de (...)
Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
TSSOP (PW) 16 Ultra Librarian
VQFN (RLL) 24 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Serie de videos

Ver todos los videos

Videos