Applications with only a positive supply voltage often require additional stable voltage in the middle of the analog-to-digital converter (ADC) input range to bias input bipolar signals. The REF20xx provides a reference voltage (VREF) for the ADC and a second highly-accurate voltage (VBIAS) that can be used to bias the input bipolar signals.
The REF20xx offers excellent temperature drift (8ppm/°C, maximum) and initial accuracy (0.05%) on both the VREF and VBIAS outputs while operating at a quiescent current less than 430µA. In addition, the VREF and VBIAS outputs track each other with a precision of 6ppm/°C (maximum) across the temperature range of –40°C to 125°C. All these features increase the precision of the signal chain and decrease board space, while reducing the cost of the system as compared to a discrete solution. Extremely low dropout voltage of only 10mV allows operation from very low input voltages, which can be very useful in battery-operated systems.
Both the VREF and VBIAS voltages have the same excellent specifications and can sink and source current equally well. Very good long-term stability and low noise levels make these devices ideally-designed for high-precision industrial applications.
| Documentación principal | Tipo | Título | Opciones de formato | Descargar la versión más reciente en inglés | Fecha |
|---|---|---|---|---|---|
| * | Hoja de datos | REF20 Low-Drift, Low-Power, Dual-Output, VREF and VREF / 2 Voltage Reference datasheet (Rev. F) | PDF | HTML | 23/07/2026 | |
| Nota sobre la aplicación | Voltage Reference Selection and Design Tips For Data Converters (Rev. B) | PDF | HTML | 9/01/2024 | ||
| Libro electrónico | Tips and tricks for designing with voltage references (Rev. A) | 7/05/2021 | |||
| Informe | Simplifying Signal Chain Design for High Performance in Small Systems | 22/10/2020 | |||
| Application brief | Voltage Reference Solutions in Motor Control Drives | 29/07/2019 | |||
| Libro electrónico | Voltage Supervisor and Reset ICs: Tips, Tricks and Basics | 28/06/2019 | |||
| Informe | Voltage reference selection basics white paper (Rev. A) | 23/10/2018 | |||
| Application brief | Level Shifting Signals With Differential Amplifiers (Rev. A) | 2/04/2018 | |||
| Nota sobre la aplicación | Low-Cost, Low-Power, Small 14-bit AFE: Interleaved ADCs Scalable up to 7.5 MSPS | 26/05/2017 |
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
Speed up your op amp prototyping and testing with the DIP-Adapter-EVM, which provides a fast, easy and inexpensive way to interface with small, surface-mount ICs. You can connect any supported op amp using the included Samtec terminal strips or wire them directly to existing circuits.
The (...)
Este diseño de referencia demuestra un método para controlar un convertidor de corrección del factor de potencia (PFC) de tótem en modo de conducción continua utilizando los microcontroladores C2000 F28003x y F28004x. La PFC también funciona como inversor en modo conectado a la red (controlado por (...)
The TIDA-00178 reference design is an EMC compliant industrial interface to Sin/Cos position encoders. Applications include industrial drives, which require accurate speed and position control.
The design utilizes a 16-bit dual sample ADC with drop-in compatible 14- or 12-bit versions available, (...)
This reference design provides interfacing current output Hall sensors and current transformers to pseudo-differential ADC (standalone and integrated into MCU). Two variants of signal conditioning circuits are designed to measure motor current using bipolar and unipolar supply voltages (...)
This reference design provides interfacing current output Hall sensors and current transformers to differential ADC (standalone and integrated into MCU). The differential signal conditioning circuit is designed to measure motor current with an accuracy of ±0.5% across operating (...)
This Verified TI Precision Design implements a low-drift, bi-directional, low-side, single-supply current sensing solution that measures load currents from -2.5 A to +2.5 A. The output range is from 250 mV to 2.75 V, with 0 A current centered at 1.5 V. To achieve low-drift performance, (...)
| Encapsulado | Pines | Símbolos CAD, huellas y modelos 3D |
|---|---|---|
| SOT-23-THN (DDC) | 5 | Ultra Librarian |
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI.