Inicio Interfaz IO-Link y E/S digitales
Inicio
Interfaz
IO-Link y E/S digitales
NUEVO

TIOM2212

PRESENTACIÓN PRELIMINAR
Haga su pedido ahora
Hoja de datos

TIOM2212

PRESENTACIÓN PRELIMINAR
Hoja de datos Haga su pedido ahora

Detalles del producto

Type IO-Link Current limit (max) (A) 0.7 Features Configurable current limiter, Dual Channel, Low residual voltage, Remote wakeup, Reverse polarity protection Operating temperature range (°C) -40 to 125
Type IO-Link Current limit (max) (A) 0.7 Features Configurable current limiter, Dual Channel, Low residual voltage, Remote wakeup, Reverse polarity protection Operating temperature range (°C) -40 to 125
VQFN (RGZ) 48 49 mm² (7 mm × 7 mm)
  • Two independent IO-Link PHY channels
    • High performance C/Q driver: 1Ω RDS(on), up to 700mA DC
    • Configurable PNP, NPN, push-pull, or IO-Link 1.1.5 compliant output supporting IEC 61131-9 COM1, COM2, and COM3
  • Integrated IO-Link frame handler simplifies board level signal routing, reducing need for UART
    • Offloads protocol-related processing from the microcontroller/processor
    • Supports up to 25MHz high-speed SPI with optional UART support
      • 1.8V to 5.5V I/O compatibility
    • Integrated diagnostics: overtemperature, overvoltage and undervoltage, C/Q & L+ overcurrent, reverse polarity
    • Hardware interrupt and reset pins
    • Integrated wake-up pulse generation and communication sequencer
    • Ready pulse detection for OSSDe compatibility
  • Integrated gate drivers for external NFETs supporting both L+ and C/Q
    • Capable of driving >4A NFETs for actuator support
    • Capable of L+ and C/Q current sense feedback to external ADC
  • Two outputs configurable to IEC61131-2 digital input channels (type 1 or type 3)
  • Robust protection on all interface pins (C/Q, DI, L+, VCC, S, G, C/QG, C/QS)
    • ±65V DC protection and ±70V transient protection
    • Reverse polarity protection (C/Q and L+)
    • Reverse current blocking (C/Q and L+)
  • 12 LED register controlled PWM drivers (6 per channel)
  • Two independent IO-Link PHY channels
    • High performance C/Q driver: 1Ω RDS(on), up to 700mA DC
    • Configurable PNP, NPN, push-pull, or IO-Link 1.1.5 compliant output supporting IEC 61131-9 COM1, COM2, and COM3
  • Integrated IO-Link frame handler simplifies board level signal routing, reducing need for UART
    • Offloads protocol-related processing from the microcontroller/processor
    • Supports up to 25MHz high-speed SPI with optional UART support
      • 1.8V to 5.5V I/O compatibility
    • Integrated diagnostics: overtemperature, overvoltage and undervoltage, C/Q & L+ overcurrent, reverse polarity
    • Hardware interrupt and reset pins
    • Integrated wake-up pulse generation and communication sequencer
    • Ready pulse detection for OSSDe compatibility
  • Integrated gate drivers for external NFETs supporting both L+ and C/Q
    • Capable of driving >4A NFETs for actuator support
    • Capable of L+ and C/Q current sense feedback to external ADC
  • Two outputs configurable to IEC61131-2 digital input channels (type 1 or type 3)
  • Robust protection on all interface pins (C/Q, DI, L+, VCC, S, G, C/QG, C/QS)
    • ±65V DC protection and ±70V transient protection
    • Reverse polarity protection (C/Q and L+)
    • Reverse current blocking (C/Q and L+)
  • 12 LED register controlled PWM drivers (6 per channel)

The TIOM2212 dual channel IO-Link controller implements two independent IO-Link interfaces for industrial bidirectional, point-to-point communication with an integrated frame handler. The device can be connected to two IO-Link devices through a three-wire interface and integrates automatic wake-up pulse generation, communication sequencer, and ready pulse detection for simplified communication with IO-Link devices. The integrated frame handlers can be controlled via SPI, eliminating the need for external UARTs, but for legacy systems or non-standard frame sizes, a UART interface is available for maximum flexibility.

The TIOM2212 is designed to provide high flexibility and system-level integration for industrial automation. This device supports advanced status indications with integrated LED drivers, external NFET gate drivers for high-power L+ supply and C/Q device actuation, and configurable digital features for port synchronization and system monitoring. The device architecture also enables efficeint, high-speed SPI communication for rapid data updates and maximum system integration.

The TIOM2212 dual channel IO-Link controller implements two independent IO-Link interfaces for industrial bidirectional, point-to-point communication with an integrated frame handler. The device can be connected to two IO-Link devices through a three-wire interface and integrates automatic wake-up pulse generation, communication sequencer, and ready pulse detection for simplified communication with IO-Link devices. The integrated frame handlers can be controlled via SPI, eliminating the need for external UARTs, but for legacy systems or non-standard frame sizes, a UART interface is available for maximum flexibility.

The TIOM2212 is designed to provide high flexibility and system-level integration for industrial automation. This device supports advanced status indications with integrated LED drivers, external NFET gate drivers for high-power L+ supply and C/Q device actuation, and configurable digital features for port synchronization and system monitoring. The device architecture also enables efficeint, high-speed SPI communication for rapid data updates and maximum system integration.
filter Buscar otro/a IO-Link y E/S digitales
Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos TIOM2212 Dual Channel IO-Link Master With Integrated Frame Handler, Supply Controller and Diagnostics datasheet PDF | HTML 5/10/2026

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TIOL221EVM — Módulo de evaluación TIOL221

El módulo de evaluación (EVM) TIOL221 es una plataforma para evaluar las funciones principales y el rendimiento de TIOL221 en el control de pines y las configuraciones de la interfaz periférica serial (SPI). El EVM contiene un conector M12 de cuatro pines estándar de la industria con una (...)
Guía del usuario: PDF | HTML
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VQFN (RGZ) 48 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos