Inicio Interfaz Circuitos integrados de protección de puertos para aplicaciones específicas
Inicio
Interfaz
Circuitos integrados de protección de puertos para aplicaciones específicas

TPD3S713-Q1

ACTIVO

Límite de corriente ajustable para USB automotriz de 0.05 A a 0.6 A y protección VBUS/D+/D- contra c

Haga su pedido ahora
Hoja de datos

Se encuentra disponible una versión más nueva de este producto

open-in-new Comparar alternativas
Pin por pin con la misma funcionalidad que el dispositivo comparado
TPD3S713A-Q1 ACTIVO Límite de corriente ajustable para USB automotriz de 0.05 A a 0.6 A y protección VBUS/D+/D- contra c Pin-to-pin product with specific fault actions. 

TPD3S713-Q1

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Number of switches 1 IO capacitance (typ) (pF) 10.9 IEC 61000-4-2 contact (±V) 8000 IEC 61000-4-2 air-gap (±V) 15000 Features Current limit, Short-to-battery protection Bi-/uni-directional Unidirectional Rating Automotive Operating temperature range (°C) -40 to 125 TI functional safety category Functional Safety-Capable Interface type USB 2.0
Number of switches 1 IO capacitance (typ) (pF) 10.9 IEC 61000-4-2 contact (±V) 8000 IEC 61000-4-2 air-gap (±V) 15000 Features Current limit, Short-to-battery protection Bi-/uni-directional Unidirectional Rating Automotive Operating temperature range (°C) -40 to 125 TI functional safety category Functional Safety-Capable Interface type USB 2.0
WQFN (RVC) 20 12 mm² 4 x 3
  • AEC-Q100 qualified for automotive applications:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM ESD classification level H2
    • Device CDM ESD classification level C5
  • Short-to-battery (up to 18 V) and short-to-ground protection on V BUS pin
  • Short-to-battery (up to 18 V) and short-to-V BUS protection on DM_IN, DP_IN pins
  • DP_IN, DM_IN and V BUS IEC 61000-4-2 rated
    • ±8-kV contact and ±15-kV air discharge
  • DP_IN, DM_IN and V BUS ISO 10605 (330 pF, 330 Ω) rated
    • ±8-kV contact and ±15-kV air discharge
  • High speed data switches (1230-MHz BW)
  • 4.5-V to 5.5-V input operating range
  • 50-mA to 600-mA adjustable current limit (±13.5% at 200 mA)
  • Integrated 73-mΩ (typical) high-side MOSFET
  • 500-mA maximum continuous output current
  • V BUS cable compensation
  • 20-pin QFN (3 mm × 4 mm) package
  • AEC-Q100 qualified for automotive applications:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM ESD classification level H2
    • Device CDM ESD classification level C5
  • Short-to-battery (up to 18 V) and short-to-ground protection on V BUS pin
  • Short-to-battery (up to 18 V) and short-to-V BUS protection on DM_IN, DP_IN pins
  • DP_IN, DM_IN and V BUS IEC 61000-4-2 rated
    • ±8-kV contact and ±15-kV air discharge
  • DP_IN, DM_IN and V BUS ISO 10605 (330 pF, 330 Ω) rated
    • ±8-kV contact and ±15-kV air discharge
  • High speed data switches (1230-MHz BW)
  • 4.5-V to 5.5-V input operating range
  • 50-mA to 600-mA adjustable current limit (±13.5% at 200 mA)
  • Integrated 73-mΩ (typical) high-side MOSFET
  • 500-mA maximum continuous output current
  • V BUS cable compensation
  • 20-pin QFN (3 mm × 4 mm) package

The TPD3S713x-Q1 is a single-chip solution for short-to-battery, short-circuit, and ESD protection for high-speed data and power lines in automotive USB hub, head unit, telematics, and media interface applications. The integrated data switches provide best-in-class bandwidth for minimal signal degradation during USB short-to-battery events. The high bandwidth of 1.2 GHz allows for a clean USB2.0 high-speed 480-Mbps eye diagram with the long captive cables that are common in the automotive USB environment.

The short-to-battery protection isolates the internal system circuits from any overvoltage conditions at the V BUS, DP_IN, and DM_IN pins. On these pins, the TPD3S713x-Q1 can handle overvoltages up to 18 V for hot plug and DC events and shut off the internal switches to the upstream transceiver from harmful voltage and current spikes.

The V BUS pin also provides an adjustable current limited load switch from 50 mA to 600 mA, which provides flexibility and also saves system power budget when the port requires only several tens of milliampere.

The TPD3S713x-Q1 device has a current-sense output that is able to control an upstream supply, which allows it to maintain 5 V at the remote USB port connected after a long USB cables.

The TPD3S713x-Q1 is a single-chip solution for short-to-battery, short-circuit, and ESD protection for high-speed data and power lines in automotive USB hub, head unit, telematics, and media interface applications. The integrated data switches provide best-in-class bandwidth for minimal signal degradation during USB short-to-battery events. The high bandwidth of 1.2 GHz allows for a clean USB2.0 high-speed 480-Mbps eye diagram with the long captive cables that are common in the automotive USB environment.

The short-to-battery protection isolates the internal system circuits from any overvoltage conditions at the V BUS, DP_IN, and DM_IN pins. On these pins, the TPD3S713x-Q1 can handle overvoltages up to 18 V for hot plug and DC events and shut off the internal switches to the upstream transceiver from harmful voltage and current spikes.

The V BUS pin also provides an adjustable current limited load switch from 50 mA to 600 mA, which provides flexibility and also saves system power budget when the port requires only several tens of milliampere.

The TPD3S713x-Q1 device has a current-sense output that is able to control an upstream supply, which allows it to maintain 5 V at the remote USB port connected after a long USB cables.
open-in-new Buscar otro/a Circuitos integrados de protección de puertos para aplicaciones específicas
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 4
Tipo Título Fecha
* Data sheet TPD3S713-Q1 and TPD3S713A-Q1 Automotive USB 2.0 Interface Protection With Adjustable Current Limit and Short-to-VBATT Protection datasheet (Rev. B) PDF | HTML 19 abr 2023
Functional safety information TPD3S713-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA (Rev. A) PDF | HTML 18 oct 2023
Certificate TPD3S713Q1EVM-103 EU RoHS Declaration of Conformity (DoC) 23 sep 2020
EVM User's guide TPD3S713Q1EVM-103 User's Guide 02 dic 2019

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPD3S713Q1EVM-103 — Módulo de evaluación TPD3S713-Q1 de protección de interfaz de USB 2.0 para automoción con límite de

The TPD3S713Q1EVM-103 are evaluation modules (EVM) for The TPD3S713-Q1 which is a single-chip solution for shortto-Battery, short-circuit, and ESD protection for high speed data and power lines in automotive USB hub, head unit applications.
Guía del usuario: PDF
No disponible en TI.com
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Solicitar
Herramienta de simulación

TINA-TI — Programa de simulación analógica basado en SPICE

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Guía del usuario: PDF
Ver opciones
Paquete Pasadores Descargar
WQFN (RVC) 20 Ver opciones
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos