(typical) MOSFETs for High Efficiency at 3-A LoadsSWIFT, SwitcherPro are trademarks of Texas Instruments.
The TPS54319 device is a full featured 6 V, 3 A, synchronous step down current mode converter with two integrated MOSFETs.
The TPS54319 enables small designs by integrating the MOSFETs, implementing current mode control to reduce external component count, reducing inductor size by enabling up to 2 MHz switching frequency, and minimizing the IC footprint with a small 3mm × 3mm thermally enhanced QFN package.
The TPS54319 provides accurate regulation for a variety of loads with an accurate ±3.0% Voltage Reference (VREF) over temperature.
Efficiency is maximized through the integrated 45m MOSFETs and 360µA typical supply current. Using the enable pin, shutdown supply current is reduced to 2 µA by entering a shutdown mode.
Under voltage lockout is internally set at 2.6 V, but can be increased by programming the threshold with a resistor network on the enable pin. The output voltage startup ramp is controlled by the slow start pin. An open drain power good signal indicates the output is within 93% to 107% of its nominal voltage.
Frequency fold back and thermal shutdown protects the device during an over-current condition.
The TPS54319 is supported in the SwitcherPro™ Software Tool at www.ti.com/switcherpro.
For more SWIFT™ documentation, see the TI website at www.ti.com/swift.
| Tipo | Título | Fecha | ||
|---|---|---|---|---|
| * | Data sheet | 2.95 V to 6 V Input, 3-A Output, 2MHz, Synchronous Step Down Switcher With Integ datasheet | 28 ene 2010 | |
| White paper | Understanding the trade-offs and technologies to increase power density (Rev. C) | PDF | HTML | 14 abr 2023 | |
| Technical article | Smaller size now possible in 3A point-of-load converters | PDF | HTML | 03 jun 2015 | |
| Application note | Designing Type III Compensation for Current Mode Step-Down Converters (Rev. A) | 15 sep 2010 |
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
El ADS58J64EVM es una placa de evaluación que se usa para evaluar el receptor integrado ADS58J64 de Texas Instruments. El ADS58J64 es un receptor de telecomunicaciones de cuatro canales, baja potencia, 14 bits y 500 MSPS con entrada analógica con búfer. El dispositivo admite la interfaz JESD204B y (...)
| Encapsulado | Pines | Símbolos CAD, huellas y modelos 3D |
|---|---|---|
| WQFN (RTE) | 16 | Ultra Librarian |
Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI.