INA216
- CHIP-SCALE PACKAGE
- COMMON-MODE RANGE: +1.8V to +5.5V
- OFFSET VOLTAGE: ±30µV
- GAIN ERROR: ±0.2% MAX
- CHOICE OF GAINS:
- INA216A1: 25V/V
- INA216A2: 50V/V
- INA216A3: 100V/V
- INA216A4: 200V/V
- QUIESCENT CURRENT: 13µA
- BUFFERED VOLTAGE OUTPUT: No Additional Op Amp Needed
The INA216 is a high-side voltage output current shunt monitor that can sense drops across shunts at common-mode voltages from +1.8V to +5.5V. Four fixed gains are available: 25V/V, 50V/V, 100V/V, and 200V/V. The low offset of the Zerø-Drift architecture enables current sensing with maximum drops across the shunt as low as 10mV full-scale, or with wide dynamic ranges of over 1000:1.
These devices operate from a single +1.8V to +5.5V power supply, drawing a maximum of 25µA of supply current. The INA216 series are specified over the temperature range of –40°C to +125°C, and offered in a chip-scale package.
技術資料
| 上位の文書 | タイプ | タイトル | フォーマットオプション | 最新の英語版をダウンロード | 日付 | |
|---|---|---|---|---|---|---|
| * | データシート | Small Size, Low-Power, Unidirectional CURRENT SHUNT MONITOR データシート (Rev. C) | 2011/11/04 | |||
| アプリケーション・ノート | PCB の銅箔パターンを電流センスの シャント抵抗として使用する方法 | PDF | HTML | PDF | HTML | 2026/05/01 | ||
| アプリケーション・ノート | Risks and Prevention of ESD, EOS, and Latch Up Events for Current Sense Amplifiers | PDF | HTML | 2024/11/18 | |||
| セレクション・ガイド | Current Sense Amplifiers (Rev. E) | 2021/09/20 | ||||
| 技術記事 | Why current and magnetic sensing matters for wireless earbud design | PDF | HTML | 2019/11/11 |
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
INA216EVM — INA216 Evaluation Module
The INA216EVM is intended to provide basic functional evaluation of this device family. The fixture layout is not intended to be a model for the target circuit, nor is it laid out for electromagnetic compatibility (EMC) testing. The INA216EVM allows the user to install a shunt resistor, and then (...)
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
アナログ エンジニア向けカリキュレータは、アナログ回路設計エンジニアが日常的に使用する反復的な計算の多くを迅速化します。この PC ベース ツールはグラフィカル インターフェイスにより、帰還抵抗を使用したオペアンプのゲイン設定から、A/D コンバータ (ADC) のドライブ バッファ回路の安定化に最適な部品の選択に至るまで、一般的に行われている各種計算のリストを表示します。
スタンドアロン ツールとして使用できるほか、『アナログ回路設計式一覧ポケット ガイド』で説明されているコンセプトと組み合わせることもできます。
CS-AMPLIFIER-ERROR-TOOL — Current Sense Amplifier Comparison and Error Tool
TIDA-00302 — 堅牢な過渡特性の電流シャント モニタ リファレンス デザイン
このハイサイド電流シャント モニタは、電流が電流検出抵抗を流れるときに、その両端に発生する電圧を測定するために使用されます。
さらに、サージおよび高速過渡現象から保護するための外部保護回路を実装しており、IEC61000-4-4 および IEC61000-4-5 に対するさまざまな耐性レベルを実証しています。
| パッケージ | ピン数 | CAD シンボル、フットプリント、および 3D モデル |
|---|---|---|
| UQFN (RSW) | 10 | Ultra Librarian |
| DSBGA (YFF) | 4 | Ultra Librarian |