MSPM0G3218-Q1
車載対応、256KB デュアルバンク フラッシュ、32KB SRAM、ADC、COMP、MATHACL、CAN 搭載、80MHz Arm® Cortex®-M0+ マイコン
MSPM0G3218-Q1
- AEC-Q100 qualified for automotive applications
- Core
- Arm 32-bit Cortex M0+ CPU with memory protection unit, frequency up to 80MHz
-
Functional Safety-Compliant targeted
-
Developed for functional safety applications
- Documentation to aid ISO 26262 system design will be available
-
Systematic capability up to ASIL B planned
-
- PSA-L1 Certification planned
- Operating characteristics
- Extended temperature: –40°C up to 125°C
- Wide supply voltage range: 1.62V to 3.6V
- Memories
- Up to 256KB of
flash memory with error correction code (ECC)
- Dual-bank with address swap for OTA updates
- 8KB data flash bank with ECC protection
- 32KB total SRAM with ECC protection or hardware parity
- Up to 256KB of
flash memory with error correction code (ECC)
- High-performance analog peripherals
- Up to two
simultaneous sampling 12-bit 1.6Msps analog-to-digital converters (ADC) with up to 27
external channels
- 14-bit effective resolution at 100ksps with hardware averaging
- Up to two
high-speed comparators (COMP) with integrated 8-bit reference DACs
- 32ns propagation delay in high-speed mode
- Support low-power mode operation down to <1µA
- Programmable analog connections between ADC and COMP
-
Two voltage references (VREF)
-
Configurable 1.4V or 2.5V internal shared voltage reference with external VREF capacitor
-
Configurable 1.4V or 2.5V internal only voltage reference without external VREF capacitor
-
- Integrated temperature sensor
- Up to two
simultaneous sampling 12-bit 1.6Msps analog-to-digital converters (ADC) with up to 27
external channels
- Optimized low-power modes (estimates for early samples)
- RUN: 104µA/MHz (CoreMark)
- SLEEP: 614uA at 4MHz
- STOP: 56µA at 32kHz
- STANDBY: 1.4µA at 32kHz with RTC and SRAM state retention
- SHUTDOWN: 69nA with IO wake-up capability
- Intelligent digital peripherals
- 9-channel DMA controller
- Math accelerator supports DIV, SQRT, MAC and TRIG computations
- Five timers support
up to 18 PWM channels
- One 16-bit general-purpose timers support QEI
- Two 16-bit general-purpose timers support low-power operation in STANDBY mode
- Two 16-bit advanced timers with deadband support and complimentary outputs up to 12 PWM channels
-
Two basic software timers including 4 independent configurable 16-bit counters each
-
Ability to daisy-chain 2 of the 16-bit counters to form a 32-bit counter
-
Ability to generate 2x interrupt driven PWMs per basic software timer
-
- Two windowed watchdog timers (WWDT), one independent watchdog timer (IWDT)
- RTC with alarm and calendar mode
- Enhanced communication interfaces
-
Five configurable serial interfaces (UNICOMM)
- One configurable serial interface supporting UART or SPI
-
One configurable serial interfaces supporting UART (with LIN) or I2C (controller or target mode)
-
One configurable serial interfaces supporting UART or I2C (controller or target mode)
-
One dedicated UART + LIN interface
-
One dedicated SPI interface up to 32Mbits/s
-
One Controller Area Network (CAN) interface supporting CAN 2.0 A or B and CAN-FD
-
- Clock system
- Internal 4 to 32MHz oscillator (SYSOSC) with up to ±1.2% accuracy
- Phase-locked loop (PLL) up to 80MHz
- Internal 32kHz low-frequency oscillator (LFOSC) with ±3% accuracy
- External 4 to 48MHz crystal oscillator (HFXT)
- External 32kHz crystal oscillator (LFXT)
- External clock input
- Data integrity and encryption
- AES-128/256 accelerator with support for GCM/GMAC, CCM/CBC-MAC, CBC, CTR
- Secure key storage for up to four AES keys
- Flexible firewalls for protecting code and data
- Cyclic redundancy checker (CRC-16, CRC-32)
- Flexible I/O features
- Up to 60 GPIOs
- Two 5V-tolerant open-drain IOs
- Three high-drive IOs with 20mA drive strength
- Four high-speed IOs
- Up to 60 GPIOs
- Development support
- 2-pin serial wire debug (SWD)
- Package options
- 64-pin LQFP (PM) (0.5mm pitch)
- 48-pin LQFP (PT) (0.5mm pitch)
- 48-pin VQFN (RGZ) (0.5mm pitch, wettable flank)
- 32-pin VQFN (RHB) (0.5mm pitch, wettable flank)
-
28-pin VSSOP (28DGS) (0.5mm pitch)
-
24-pin VQFN (RGE) (0.5mm pitch, wettable flank)
-
20-pin VQFN (20DGS) (0.5mm pitch)
- Family members (also see Device Comparison)
- MSPM0G3218-Q1: 256KB flash, 32KB RAM, 8 KB Databank, 2x ADC, 2x COMP, 1x CAN-FD
-
MSPM0G3207-Q1: 128KB flash, 32KB RAM, 8 KB Databank, 1x ADC, 1x COMP, 1x CAN-FD
- Development kits and software (also see Tools and Software)
-
LP-MSPM0G3218 Launchpad Development Kit
- MSPM0 Software Development Kit (SDK)
-
MSPM0G3218-Q1 and MSPM0G3207-Q1 microcontrollers (MCUs) are part of the MSP highly integrated, ultra-low-power 32-bit MCU family based on the enhanced Arm Cortex-M0+ 32-bit core platform, operating at up to 80MHz frequency. These MCUs offer a blend of cost optimization and design flexibility for applications requiring 128KB to 256KB of flash memory in packages ranging from 24 to 64 pins. These devices include CAN-FD controllers, cybersecurity enablers, high performance integrated analog, and provide excellent low power performance across the operating temperature range.
The device has up to 256KB of embedded flash program memory with built-in error correction code (ECC) and up to 32KB SRAM (with ECC and parity protection). The flash memory is organized into two main banks to support field firmware updates, with address swap support provided between the two main banks.
Flexible cybersecurity enablers can be used to support secure boot, secure in-field firmware updates, IP protection (execute-only memory), key storage, and more. Hardware acceleration is provided for a variety of AES symmetric cipher modes. The cybersecurity architecture is pending Arm® PSA Level 1 certification.
A set of high performance analog modules is provided, such as two simultaneously sampling 12-bit, 1.6Msps ADCs supporting up to 27 external channels, on-chip voltage reference (1.4V or 2.5V), and two comparators operable in low-power and high-speed modes with additional built-in 8-bit reference DACs.
The TI MSPM0 family of low-power MCUs consists of devices with varying degrees of analog and digital integration. The MSPM0 MCU platform combines the Arm Cortex-M0+ platform with a holistic ultra-low-power system architecture, allowing system designers to increase performance while reducing energy consumption.
MSPM0G3218-Q1 and MSPM0G3207-Q1 MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get the design started quickly. Development kits include a LaunchPad available for purchase. TI also provides a free MSPM0 Software Development Kit (SDK), which is available as a component of Code Composer Studio™ IDE desktop and cloud version within the TI Resource Explorer. MSPM0 MCUs are also supported by extensive online collateral, training with MSP Academy, and online support through the TI E2E™ support forums.
For complete module descriptions, see the MSPM0 G-Series 80MHz Microcontrollers Technical Reference Manual.
技術資料
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
LP-MSPM0G3218 — MSPM0G3218 LaunchPad™ development kit evaluation module
TSK-3P-BLUEBOX — TASKING BlueBox hardware debugger
TASKING’s Debug, Trace, and Test tools offer comprehensive solutions for efficient debugging, tracing, and testing of TI's embedded systems. The scalable TASKING BlueBox debuggers allow users to easily flash, debug, and test across TI's portfolio. Development on TI hardware is made even easier with (...)
C-GANG — スタンドアローンおよび内蔵フラッシュ書き込み向けの高速で信頼性の高いギャング プログラミング ソリューション
C-GANG は、同時に最大 6 つの同一ターゲットをプログラムできる低コストのギャング プログラマです。MSPM0、MSP430 や C2000 デバイスを含むさまざまな TI マイコンと互換性があります。
MSPM0-SDK — MSPM0 Software Development Kit (SDK)
MSPM0 SDK は、MSPM0 マイコン プラットフォーム向けアプリケーションの開発を迅速化できるように、ソフトウェア、ツール、資料で構成された包括的なコレクションを単一のソフトウェア パッケージに収録しています。
MSPM0-ZEPHYR-SDK — Zephyr SDK for MSPM0 Devices
MSPM0 SDK は、MSPM0 マイコン プラットフォーム向けアプリケーションの開発を迅速化できるように、ソフトウェア、ツール、資料で構成された包括的なコレクションを単一のソフトウェア パッケージに収録しています。
CCSTUDIO — Code Composer Studio 統合開発環境(IDE)
CCStudio™ IDE is an integrated development environment designed for Texas Instruments' embedded processors, available as both a desktop and cloud-based application. It is an integral part of TI's extensive CCStudio™ development ecosystem.
CCStudio IDE is built on Eclipse Theia™ framework, the (...)
CCSTUDIO-OPENOCD — OpenOCD Binary Releases
MSP-ZERO-CODE-STUDIO — Graphical development environment for designing applications for MSP microcontrollers
MSP Zero Code Studio は、ファームウェア開発をシンプルにする視覚的な設計環境で、ゼロコーディングやIDE不要で、マイコン アプリケーションの構成、開発、実行が数分で完了できます。スタンドアロン ダウンロード形式、またはクラウド上で利用可能。
SYSCONFIG — SysConfigのスタンドアロン・デスクトップ・バージョン
CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.
SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)
TSK-3P-VX-TOOLSET — Arm 向け TASKING VX-toolset
Arm 向け VX-toolset は、特定の Cortex-M および Cortex-R コア デバイス上のセーフティ クリティカルな組込みソフトウェア開発向けの認定取得済みコンパイラ ツールチェーンです。Eclipse IDE の統合、高度なマルチコア サポート、TASKING 社の BlueBox デバッガとの互換性を備えており、VX-toolset によって開発を簡略化できます。TÜV NORD によって ISO 26262 の最高レベル ASIL D と ISO 21434 への準拠を認証済み。
MSPM0-ACADEMY — MSPM0™ academy
CCSTUDIO-STARTHUB — Example application browser
MSP-MOTOR-CONTROL — MSPM0 Firmware solutions for motor control applications
MSP モーター制御ライブラリは、MSPM0 Arm® Cortex® M0+ マイコンと一般的なモーター ドライバ ソリューションを使用して、30 分以内にモーターを動作させるのに役立つ、ソフトウェア、ツール、サンプルのコレクション (ライブラリ) です。
MSP モーター制御ライブラリは、性能、統合、使いやすさを重視して最適化済みのセンサ付き / センサレス制御アルゴリズムを使用して、ブラシ付きモーター、ステッピング モーター、3 相モーターを動作させることができるように、サポート対象のハードウェア (...)
TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud
LP-MSPM0G3507-OOBE — Out-of-box experience GUI for LP-MSPM0G3507
MSPM0-ANALOG-CONFIGURATOR — Analog Configurator for MSPM0
MSPM0 Analog Configurator (アナログ構成ツール) は、コーディングを中心とする従来の開発を必要とせずに、MSPM0 デバイスを使用してアナログ シグナル チェーンの設計と実装のシンプル化や迅速化に役立つ設計を採用したグラフィカル構成ツールです。
このツールは直感的な GUI を使用して、MSPM0 デバイスの高いアナログ統合機能を活用したシグナル チェーンの構成、信号のリアルタイム解析およびプロット、デバイスに書き込むための構成とコードの生成を行います。
MSP-GANG-SOFTWARE — MSP-GANG ソフトウェア
UNIFLASH — ほとんどの TI 製マイコン(MCU)とミリ波センサに対応する UniFlash
UniFlash は、テキサス インスツルメンツの広範な CCStudio™ 開発エコシステムであり、マイコンやワイヤレス コネクティビティ デバイスが搭載しているオンチップ フラッシュと、テキサス インスツルメンツ製プロセッサ向けのオンボード フラッシュに対してプログラミング (書き込み) を行うためのソフトウェア ツールです。UniFlash には、グラフィカル インターフェイスとコマンド ライン インターフェイスの両方が備わっており、デスクトップまたはクラウドで実行できます。
UniFlash は CCStudio™ Developer Zone (...)
LP-MSPM0G3218-DOC-CERT — LP-MSPM0G3218 EU Declaration of Conformity (DoC)
| パッケージ | ピン数 | CAD シンボル、フットプリント、および 3D モデル |
|---|---|---|
| LQFP (PT) | 48 | Ultra Librarian |
| VQFN (RHB) | 32 | Ultra Librarian |
| LQFP (PM) | 64 | Ultra Librarian |
| VQFN (RGZ) | 48 | Ultra Librarian |
購入と品質
推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。