OPA1622

アクティブ

高性能、低 THD+N、バイポーラ入力、SoundPlus™ オーディオ・オペアンプ

製品詳細

Number of channels 2 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 4 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 36 GBW (typ) (MHz) 32 Slew rate (typ) (V/µs) 10 Rail-to-rail No Vos (offset voltage at 25°C) (max) (mV) 0.5 Iq per channel (typ) (mA) 2.6 Vn at 1 kHz (typ) (nV√Hz) 2.8 Features Burr-Brown™ Audio, High Cload Drive, Premium Sound, Shutdown, Small Size THD + N at 1 kHz (typ) (%) 0.000018 Rating Catalog Operating temperature range (°C) -40 to 125 Iout (typ) (A) 0.145 Product type Ultimate Architecture Bipolar CMRR (typ) (dB) 127 Input bias current (max) (pA) 2000000
Number of channels 2 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 4 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 36 GBW (typ) (MHz) 32 Slew rate (typ) (V/µs) 10 Rail-to-rail No Vos (offset voltage at 25°C) (max) (mV) 0.5 Iq per channel (typ) (mA) 2.6 Vn at 1 kHz (typ) (nV√Hz) 2.8 Features Burr-Brown™ Audio, High Cload Drive, Premium Sound, Shutdown, Small Size THD + N at 1 kHz (typ) (%) 0.000018 Rating Catalog Operating temperature range (°C) -40 to 125 Iout (typ) (A) 0.145 Product type Ultimate Architecture Bipolar CMRR (typ) (dB) 127 Input bias current (max) (pA) 2000000
VSON (DRC) 10 9 mm² 3 x 3
  • High-Fidelity Sound Quality
  • Ultralow Noise: 2.8 nV/√Hz at 1 kHz
  • Ultralow Total Harmonic Distortion + Noise:
    –119 dB THD+N (142 mW/Ch into 32 Ω/Ch)
  • Wide Gain Bandwidth Product:
    32 MHz (G = +1000)
  • High Slew Rate: 10 V/µs
  • High Capacitive-Load Drive Capability: > 600 pF
  • High Open-Loop Gain: 136 dB (600-Ω Load)
  • Low Quiescent Current: 2.6 mA per Channel
  • Low-Power Shutdown Mode With Reduced Pop
    and Click Noise: 5 µA per Channel
  • Short-Circuit Protection
  • Wide Supply Range: ±2 V to ±18 V
  • Available in small VSON-10 µPackage
  • High-Fidelity Sound Quality
  • Ultralow Noise: 2.8 nV/√Hz at 1 kHz
  • Ultralow Total Harmonic Distortion + Noise:
    –119 dB THD+N (142 mW/Ch into 32 Ω/Ch)
  • Wide Gain Bandwidth Product:
    32 MHz (G = +1000)
  • High Slew Rate: 10 V/µs
  • High Capacitive-Load Drive Capability: > 600 pF
  • High Open-Loop Gain: 136 dB (600-Ω Load)
  • Low Quiescent Current: 2.6 mA per Channel
  • Low-Power Shutdown Mode With Reduced Pop
    and Click Noise: 5 µA per Channel
  • Short-Circuit Protection
  • Wide Supply Range: ±2 V to ±18 V
  • Available in small VSON-10 µPackage

The OPA1622, dual, bipolar-input, SoundPlus™ audio operational amplifier achieves a very low, 2.8-nV/√Hz noise density with an ultralow THD+N of –119.2 dB at 1 kHz, while driving a 32-Ω load at 100-mW output power. The OPA1622 offers extremely-high ac PSRR and CMRR specifications that eliminate noise from power supplies, making the OPA1622 ideal for use in portable-audio applications. This device also has a high output-drive capability of +145 mA / –130 mA.

The OPA1622 operates over a very wide supply range of ±2 V to ±18 V, on only 2.6 mA of supply current per channel. The OPA1622 op amp is unity-gain stable and provides excellent dynamic behavior over a wide range of load conditions. The OPA1622 includes a shutdown mode, allowing the amplifiers to be switched from normal operation to a standby current that is typically less than 5 µA. This shutdown feature is specifically designed to eliminate click and pop noise when transitioning into or out of shutdown mode.

The OPA1622 features a unique internal layout for lowest crosstalk, and freedom from interactions between channels, even when overdriven or overloaded. This device is specified from –40°C to +125°C.

The OPA1622, dual, bipolar-input, SoundPlus™ audio operational amplifier achieves a very low, 2.8-nV/√Hz noise density with an ultralow THD+N of –119.2 dB at 1 kHz, while driving a 32-Ω load at 100-mW output power. The OPA1622 offers extremely-high ac PSRR and CMRR specifications that eliminate noise from power supplies, making the OPA1622 ideal for use in portable-audio applications. This device also has a high output-drive capability of +145 mA / –130 mA.

The OPA1622 operates over a very wide supply range of ±2 V to ±18 V, on only 2.6 mA of supply current per channel. The OPA1622 op amp is unity-gain stable and provides excellent dynamic behavior over a wide range of load conditions. The OPA1622 includes a shutdown mode, allowing the amplifiers to be switched from normal operation to a standby current that is typically less than 5 µA. This shutdown feature is specifically designed to eliminate click and pop noise when transitioning into or out of shutdown mode.

The OPA1622 features a unique internal layout for lowest crosstalk, and freedom from interactions between channels, even when overdriven or overloaded. This device is specified from –40°C to +125°C.

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似製品

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品
INA1620 アクティブ 薄膜抵抗内蔵、EMI フィルタリング搭載、Hi-Fi オーディオ・オペアンプ High-fidelity audio operational amplifier with integrated thin-film resistors and EMI filtering

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアして、もう一度検索を行ってください。
15 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート OPA1622 SoundPlus™ High-Fidelity, Bipolar-Input, Audio Operational Amplifier データシート (Rev. B) PDF | HTML 2016年 5月 3日
アプリケーション・ノート Understanding Op Amp Noise in Audio Circuits PDF | HTML 2021年 6月 14日
技術記事 No headroom, no problem: buffering and filtering an audio signal chain in low-voltage systems 2019年 4月 11日
e-Book(PDF) Analog Engineer’s Pocket Reference Guide Fifth Edition (Rev. C) 2018年 11月 30日
e-Book(PDF) The Signal - オペアンプ設計ブログ集 英語版をダウンロード 2018年 3月 23日
アプリケーション・ノート HiFi Audio Circuit Design 2017年 8月 23日
EVM ユーザー ガイド (英語) OPA1622EVM SoundPlus™ Audio Operational Amplifier EVM User's Guide 2016年 9月 2日
技術記事 Amp up your cans: pop/click suppression in headphone amplifiers (Part 5) 2016年 4月 15日
技術記事 Amp up your cans: Distortion in headphone amplifiers (Part 4) 2016年 3月 4日
技術記事 Amp up your cans: Test your headphone amplifier distortion knowledge (Part 3) 2016年 2月 26日
Analog Design Journal Stabilizing difference amplifiers for headphone applications 2015年 4月 28日
Analog Design Journal Reducing distortion from CMOS analog switches 2015年 1月 29日
Analog Design Journal Distortion and source impedance in JFET-input op amps 2014年 10月 24日
アプリケーション・ノート 高速データ変換 英語版をダウンロード 2009年 12月 11日
アプリケーション・ノート トランスインピーダンス・アンプの直感的な補償方法 (Rev. A 翻訳版) 英語版をダウンロード (Rev.A) 2009年 12月 2日

設計および開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページを表示してください。

評価ボード

OPA1622EVM — OPA1622 オーディオ・オペアンプの評価モジュール

The OPA1622EVM is a hardware platform for evaluating the performance of the OPA1622 audio operational amplifier (op amp). On the EVM, each channel of the OPA1622 is configured as a difference amplifier that receives a differential input signal from an audio analyzer or audio DAC and outputs a (...)

ユーザー・ガイド: PDF
シミュレーション・モデル

OPA1622 PSpice Model (Rev. D)

SBOM958D.ZIP (30 KB) - PSpice Model
シミュレーション・モデル

OPA1622 TINA-TI Reference Design (Rev. C)

SBOM956C.TSC (342 KB) - TINA-TI Reference Design
シミュレーション・モデル

OPA1622 TINA-TI Spice Model (Rev. C)

SBOM957C.ZIP (11 KB) - TINA-TI Spice Model
計算ツール

ANALOG-ENGINEER-CALC — アナログ技術者向けカリキュレータ

アナログ・エンジニア向けカリキュレータは、アナログ回路設計エンジニアが日常的に繰り返し行っている計算の多くを迅速化します。この PC ベース・ツールはグラフィカル・インターフェイスにより、帰還抵抗を使用したオペアンプのゲイン設定から、A/D コンバータ(ADC)のドライブ・バッファ回路の安定化に最適な部品の選択に至るまで、一般的に行われている各種計算のリストを表示します。スタンドアロン・ツールとして使用できるほか、『アナログ回路設計式一覧ポケット・ガイド』で説明されているコンセプトと組み合わせることもできます。
シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
シミュレーション・ツール

TINA-TI — SPICE ベースのアナログ・シミュレーション・プログラム

TINA-TI は、DC 解析、過渡解析、周波数ドメイン解析など、SPICE の標準的な機能すべてを搭載しています。TINA には多彩な後処理機能があり、結果を必要なフォーマットにすることができます。仮想計測機能を使用すると、入力波形を選択し、回路ノードの電圧や波形を仮想的に測定することができます。TINA の回路キャプチャ機能は非常に直観的であり、「クイックスタート」を実現できます。

TINA-TI をインストールするには、約 500MB が必要です。インストールは簡単です。必要に応じてアンインストールも可能です。(そのようなことはないと思いますが)

TINA は DesignSoft (...)

ユーザー・ガイド: PDF
英語版をダウンロード (Rev.A): PDF
リファレンス・デザイン

TIDA-01341 — Hi-Fi ヘッドフォン・アンプ電源のリファレンス・デザイン

Headphone amplifiers usually require positive and negative voltages. In this reference design, both voltages are generated from a single input voltage with an integrated split-rail charge-pump converter. It provides small solution size with five capacitors and four resistors.
設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIPD177 — ハイファイ・ヘッドフォン・アンプ、電流出力オーディオ DAC 用、リファレンス・デザイン

この TI Precision Verified Design(検証済み設計)回路は、オーディオ DAC の差動型電流出力を、低インピーダンスのヘッドホンを駆動できるシングルエンドの電圧に変換します。このリファレンス・デザインは、携帯電話/スマートフォンやポータブル・オーディオ・プレーヤーのハイファイ性能レベルに対応しています。
ユーザー・ガイド: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
VSON (DRC) 10 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL rating / リフローピーク温度
  • MTBF/FIT 推定値
  • 材料 (内容)
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果

サポートとトレーニング

TI E2E™ Forums (英語) では、TI のエンジニアからの技術サポートが活用できます

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ