ADS7142
- Standalone, Nanopower Sensor Monitor for
Cost-sensitive Designs - Small Package Size: 1.5 mm x 2 mm
- Efficient Host Sleep and Wake-up
- Autonomous Monitoring at 900 nW
- Windowed Comparator for Event-triggered Host Wake-up
- Data Buffering during Host Sleep
- Independent Sensor Configuration and Calibration
- Dual-Channel, Pseudo-Differential, or Ground-Sense Input Configuration
- Programmable Thresholds for Calibration
- Internal Calibration improves Offset and Drift
- False Trigger Prevention
- Programmable Thresholds per Channel
- Programmable Hysteresis for Noise Immunity
- Event Counter for Transient Rejection
- Deep Data Analysis
- Data Buffer for Fault Diagnostics
- High Precision Mode for 16-bit Accuracy
- One-Shot Mode for Fast Data Capture
- I2C™ Interface
- Compatible from 1.65 V to 3.6 V
- 8 Configurable Addresses
- Up to 3.4 MHz (High Speed)
- Wide Operating Range
- Analog Supply: 1.65 V to 3.6 V
- Temperature Range: –40°C to 125°C
The ADS7142 autonomously monitors signals while optimizing system power, reliability, and performance. It implements event-triggered interrupts per channel using a digital windowed comparator with programmable high and low thresholds, hysteresis, and event counter. The device includes a dual-channel analog multiplexer in front of a successive approximation register analog-to-digital converter (SAR ADC) followed by an internal data buffer for converting and capturing data from sensors.
The ADS7142 is available in 10-pin QFN package and consumes only 900 nW of power. The small form-factor and low power consumption make this device suitable for space-constrained and/or battery-powered applications.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | ADS7142 Nanopower, Dual-Channel, Programmable Sensor Monitor datasheet (Rev. A) | PDF | HTML | 2017/12/13 |
| Circuit design | 절연 증폭기와 의사 차동 입력 SAR ADC를 지원하는 ±12V 전압 감 지 회로 (Rev. A) | 2024/07/11 | ||
| User guide | BOOSTXL-ADS7142-Q1 BoosterPack™ Plug-In Module (Rev. B) | PDF | HTML | 2021/06/09 | |
| Circuit design | Monitoring NTC Thermistor Circuit With Single-Ended ADC (Rev. A) | PDF | HTML | 2019/06/27 | |
| Application note | TM4C1294 interface to ADS7142 software library (Rev. A) | PDF | HTML | 2019/01/11 | |
| Technical article | Facing smart meter design challenges, part 1: maximizing battery life | PDF | HTML | 2018/08/16 | |
| Application brief | Predictive Maintenance in Smart Meters Using Real-Time Monitoring | 2018/07/13 | ||
| Application brief | Reduce False Triggers and Extend Battery Life in PIR Sensing Applications | 2018/03/27 | ||
| User guide | BOOSTXL-ADS7142 BoosterPack™ Plug-In Module User's Guide (Rev. B) | 2018/03/06 | ||
| Application brief | Extend Battery Life and Simplify Calibration in Gas Sensing Applications (Rev. A) | 2018/02/06 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
BOOSTXL-ADS7142-Q1 — ADS7142-Q1 2채널 12비트 140kSPS I2C 호환 ADC BoosterPack™ 플러그인 모듈
BOOSTXL-ADS7142-Q1은 나노파워, 듀얼 채널, 센서 모니터 장치인 ADS7142-Q1 SAR(연속 근사 저항)ADC(아날로그-디지털 컨버터)의 성능을 평가하기 위한 플랫폼입니다. 이 평가 키트에는 장치의 다양한 작동 모드를 보여주도록 설계된 ADS7142-Q1 BoosterPack™ 플러그인 모듈이 포함되어 있습니다.
SIMPLELINK-SDK-SENSOR-ACTUATOR-PLUGIN — Sensor and Actuator Plug-in for SimpleLink™ MCU SDKs
The Sensor and Actuator Plugin for SimpleLink™ MCU SDKs provides support for a variety of related components including optical and temperature and humidity sensors, allowing customers to easily add new features to their SimpleLink MCU-based design. API user guides are provided for each (...)
지원되는 제품 및 하드웨어
제품
디지털 온도 센서
초음파 센서 AFE
Wi-Fi 제품
선형 홀 효과 센서
습도 센서
정밀 ADC
저전력 2.4GHz 제품
광 센서
하드웨어 개발
평가 보드
개발 키트
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)
지원되는 제품 및 하드웨어
제품
정밀 연산 증폭기(Vos<1mV)
범용 연산 증폭기
오디오 연산 증폭기
트랜스임피던스 증폭기
고속 연산 증폭기(GBW ≥ 50MHz)
전력 연산 증폭기
비디오 증폭기
라인 드라이버
트랜스컨덕턴스 증폭기 및 레이저 드라이버
완전 차동 증폭기
정밀 ADC
바이오센싱 AFE
고속 ADC(≥10 MSPS)
차동 증폭기
계측 증폭기
아날로그 전류 감지 증폭기
디지털 전원 모니터
션트 레지스터 통합 아날로그 전류 감지 증폭기
션트 레지스터가 통합된 디지털 전원 모니터
다이 및 웨이퍼 서비스
RF 리시버
RF 트랜스미터
Specialty audio amplifiers
오디오 ADC
Application-specific data converters|MRI
ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.
지원되는 제품 및 하드웨어
제품
직렬 전압 레퍼런스
정밀 ADC
바이오센싱 AFE
통합 정밀 ADC 및 DAC
고속 ADC(≥10 MSPS)
정밀 DAC(≤10 MSPS)
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 착수하기 (...)
TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램
TIDA-01546 — 배터리로 구동되는 스마트 유량 계량기의 배터리 및 시스템 상태 모니터링 레퍼런스 설계
TIDA-010005 — 소프트웨어 구성 가능 심박 조율기 감지 모듈 레퍼런스 설계
TIDA-010019 — 온도 센서에 냉접점 보상을 제공하기 위한 RTD 교체 레퍼런스 설계
TIDA-01569 — 디지털 진단 및 통합 보호를 지원하는 4채널 안테나 LDO 레퍼런스 설계
TIDA-01596 — 주변 온도 감지를 위한 스마트 온도 조절기 현지화 열 보상 레퍼런스 설계
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| X2QFN (RUG) | 10 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.