DP83849ID

활성

파이버 지원이 제공되는 산업용 온도, 듀얼 포트 10/100Mbps 이더넷 PHY 트랜시버

지금 주문하기

데이터 시트

document-pdfAcrobat PHYTER DUAL Ind Temp w/Fiber Support Dual Port 10/100 Mb/s Ethernet PHY X-ceiver datasheet (Rev. E) (영어)

DP83849ID

활성

데이터 시트

지금 주문하기

제품 상세 정보

Datarate (Mbps)

10/100

Interface type

MII, RMII, SNI

Rating

Catalog

Number of ports

Dual

Features

Cable diagnostics, FX support, JTAG1149.1

I/O supply voltage (typ) (V)

3.3

Operating temperature range (°C)

-40 to 85

Number of LEDs

6

ESD HBM (kV)

4

Datarate (Mbps)

10/100

Interface type

MII, RMII, SNI

Rating

Catalog

Number of ports

Dual

Features

Cable diagnostics, FX support, JTAG1149.1

I/O supply voltage (typ) (V)

3.3

Operating temperature range (°C)

-40 to 85

Number of LEDs

6

ESD HBM (kV)

4

TQFP (PFC)

80

196 mm² (14 mm × 14 mm)

Low-power 3.3V, 0.18μm CMOS technology
Low power consumption <600mW Typical
3.3V MAC Interface
Auto-MDIX for 10/100 Mb/s
Energy Detection Mode
Dynamic Integrity Utility
Dynamic Link Quality Monitoring
TDR based Cable Diagnostic and Cable Length Detection
Optimized Latency for Real Time Ethernet Operation
Reference Clock out
RMII Rev. 1.2 Interface (configurable)
SNI Interface (configurable)
MII Serial Management Interface (MDC and MDIO)
IEEE 802.3u MII
IEEE 802.3u Auto-Negotiation and Parallel Detection
IEEE 802.3u ENDEC, 10BASE-T transceivers and filters
IEEE 802.3u PCS, 100BASE-TX transceivers and filters
IEEE 802.3u 100BASE-FX Fiber Interface
IEEE 1149.1 JTAG
Integrated ANSI X3.263 compliant TP-PMD physical sub-layer with adaptive equalization and Baseline Wander compensation
Programmable LED support for Link, 10 /100 Mb/s Mode, Activity, Duplex and Collision Detect
Single register access for complete PHY status
10/100 Mb/s packet BIST (Built in Self Test)
80-pin TQFP package (12mm x 12mm)

Low-power 3.3V, 0.18μm CMOS technology
Low power consumption <600mW Typical
3.3V MAC Interface
Auto-MDIX for 10/100 Mb/s
Energy Detection Mode
Dynamic Integrity Utility
Dynamic Link Quality Monitoring
TDR based Cable Diagnostic and Cable Length Detection
Optimized Latency for Real Time Ethernet Operation
Reference Clock out
RMII Rev. 1.2 Interface (configurable)
SNI Interface (configurable)
MII Serial Management Interface (MDC and MDIO)
IEEE 802.3u MII
IEEE 802.3u Auto-Negotiation and Parallel Detection
IEEE 802.3u ENDEC, 10BASE-T transceivers and filters
IEEE 802.3u PCS, 100BASE-TX transceivers and filters
IEEE 802.3u 100BASE-FX Fiber Interface
IEEE 1149.1 JTAG
Integrated ANSI X3.263 compliant TP-PMD physical sub-layer with adaptive equalization and Baseline Wander compensation
Programmable LED support for Link, 10 /100 Mb/s Mode, Activity, Duplex and Collision Detect
Single register access for complete PHY status
10/100 Mb/s packet BIST (Built in Self Test)
80-pin TQFP package (12mm x 12mm)

The number of applications requiring Ethernet Connectivity continues to expand. Along with this increased market demand is a change in application requirements. Where single channel Ethernet used to be sufficient, many applications such as wireless remote base stations and industrial networking now require DUAL Port functionality for redundancy or system management.

The DP83849ID is a highly reliable, feature rich device perfectly suited for industrial applications enabling Ethernet on the factory floor. The DP83849ID features two fully independent 10/100 ports for multi-port applications.

The DP83849ID provides optimum flexibility in MPU selection by supporting both MII and RMII interfaces. The device also provides flexibility by supporting both copper and fiber media.

In addition this device includes a powerful new diagnostics tool to ensure initial network operation and maintenance. In addition to the TDR scheme, commonly used for detecting faults during installation, NATIONAL's innovative cable diagnostics provides for real time continuous monitoring of the link quality. This allows the system designer to implement a fault prediction mechanism to detect and warn of changing or deteriorating link conditions.

With the DP83849ID, National Semiconductor continues to build on its Ethernet expertise and leadership position by providing a powerful combination of features and flexibility, easing Ethernet implementation for the system designer.

The number of applications requiring Ethernet Connectivity continues to expand. Along with this increased market demand is a change in application requirements. Where single channel Ethernet used to be sufficient, many applications such as wireless remote base stations and industrial networking now require DUAL Port functionality for redundancy or system management.

The DP83849ID is a highly reliable, feature rich device perfectly suited for industrial applications enabling Ethernet on the factory floor. The DP83849ID features two fully independent 10/100 ports for multi-port applications.

The DP83849ID provides optimum flexibility in MPU selection by supporting both MII and RMII interfaces. The device also provides flexibility by supporting both copper and fiber media.

In addition this device includes a powerful new diagnostics tool to ensure initial network operation and maintenance. In addition to the TDR scheme, commonly used for detecting faults during installation, NATIONAL's innovative cable diagnostics provides for real time continuous monitoring of the link quality. This allows the system designer to implement a fault prediction mechanism to detect and warn of changing or deteriorating link conditions.

With the DP83849ID, National Semiconductor continues to build on its Ethernet expertise and leadership position by providing a powerful combination of features and flexibility, easing Ethernet implementation for the system designer.

filter

기타 이더넷 PHY 찾기

다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new

대안 비교

다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.

DP83849IF

활성

광섬유 및 유연한 포트 전환을 지원하는 산업용 온도, 듀얼 포트 10/100Mbps 이더넷 PHY 트랜시버 This product includes dual 10/100M ports with fiber and flex port and operates over an industrial temperature range of -40°C to 85°C

DP83849I

활성

유연한 포트 전환을 지원하는 산업용 온도, 듀얼 포트 10/100Mbps 이더넷 PHY 트랜시버 This product includes dual 10/100M ports and operates over an industrial temperature range of -40°C to 85°C

DP83849C

활성

상업용 온도, 듀얼 포트 10/100Mbps 이더넷 PHY 트랜시버 This product includes dual 10/100M ports and operates over a commercial temperature range of 0°C to 70°C

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.

11개 모두 보기

상위 문서	유형	직함	형식 옵션	날짜
*	데이터 시트	PHYTER DUAL Ind Temp w/Fiber Support Dual Port 10/100 Mb/s Ethernet PHY X-ceiver datasheet (Rev. E)		2008. 5. 27
	애플리케이션 노트	How to Pass IEEE Ethernet Compliance Tests	PDF \| HTML	2021. 9. 20
	애플리케이션 노트	Selection and specification of crystals for Texas Instruments ethernet physical		2019. 2. 6
	애플리케이션 노트	AN-1507 DP83848 and DP83849 100Mb Data Latency (Rev. B)		2013. 4. 26
	애플리케이션 노트	AN-1508 DP83849 Cable Diagnostics (Rev. A)		2013. 4. 26
	애플리케이션 노트	AN-1509 PhyterDual Flexible Port Switching (Rev. B)		2013. 4. 26
	애플리케이션 노트	Reducing Radiated Emissions in Ethernet 10/100 LAN Applications (Rev. A)		2013. 4. 26
	애플리케이션 노트	AN-1548 PHYTER 100 Base-TX Reference Clock Jitter Tolerance (Rev. B)		2013. 4. 26
	애플리케이션 노트	AN-1540 Power Measurement of Ethernet Physical Layer Products (Rev. B)		2013. 4. 26
	애플리케이션 노트	AN-1469 PHYTER® Design & Layout Guide (Rev. D)		2013. 4. 26
	사용 설명서	DP83849IFVS User's Guide		2012. 2. 21

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

DP83849IFVS-EVK — DP83849IFVS 기본 제품 평가 및 FX를 지원하는 고객 데모 보드

This evaluation kit (EVK) is for PHYTER™ ethernet physical layer transceivers with dual industrial temperature with fiber support (FX) and flexible port switching dual port 10/100 Mb/s (backwards compatible to the DP83849IDVS-EVK).

지원되는 제품 및 하드웨어

재고 있음

제한:

주문하려면 로그인

lock

재고를 보려면 로그인

??asset.out-of-stock-ti_ko_KR??

이용할 수 없음

드라이버 또는 라이브러리

ETHERNET-SW — 이더넷 PHY 드라이버 및 툴

텍사스 인스트루먼트의 이더넷 물리적 계층(PHY) 트랜시버용 드라이버는 직렬 관리 인터페이스(MDC/MDIO)를 통한 통신을 지원하여 PHY 레지스터를 구성하고 읽습니다. Linux 및 RTOS 드라이버는 github에서 찾을 수 있습니다.

지원되는 제품 및 하드웨어

옵션 보기

지원 소프트웨어

USB-2-MDIO — USB-2-MDIO Tool v1.0

USB-2-MDIO 소프트웨어 툴을 사용하면 텍사스 인스트루먼트의 이더넷 PHY가 MDIO 상태 및 장치 제어 레지스터에 액세스할 수 있습니다. USB-2-MDIO 툴에는 경량 GUI로 인터페이싱하는 TI의 MSP430 ™ MCU용 LaunchPad™ 개발 키트가 포함되어 있습니다. LaunchPad 개발 키트는 버스에 연결된 PHY의 레지스터를 조작할 수 있는 MDIO 버스 컨트롤러를 구현합니다.

지원되는 제품 및 하드웨어

다운로드 옵션

시뮬레이션 모델