DP83849I
- Low-power 3.3-V, 0.18-µm CMOS Technology
- Low power Consumption <600 mW Typical
- 3.3-V MAC Interface
- Auto-MDIX for 10/100 Mb/s
- Energy Detection Mode
- Flexible MII Port Assignment
- Dynamic Integrity Utility
- Dynamic Link Quality Monitoring
- TDR based Cable Diagnostic and Cable Length
Detection - Optimized Latency for Real-Time Ethernet
Operation - Reference Clock Out
- RMII Rev. 1.2 Interface (Configurable)
- SNI Interface (Configurable)
- MII Serial Management Interface (MDC and MDIO)
- IEEE 802.3u MII
- IEEE 802.3u Auto-Negotiation and Parallel
Detection - IEEE 802.3u ENDEC, 10BASE-T Transceivers and
Filters - IEEE 802.3u PCS, 100BASE-TX Transceivers and
Filters - IEEE 1149.1 JTAG
- Integrated ANSI X3.263 Compliant TP-PMD
Physical Sub-layer with Adaptive Equalization and
Baseline Wander Compensation - Programmable LED Support for Link, 10/100 Mb/s
Mode, Activity, Duplex and Collision Detect - Single Register Access for Complete PHY Status
- 10/100 Mb/s Packet BIST (Built-In Self Test)
- 80-pin TQFP Package (12-mm × 12-mm)
The number of applications requiring Ethernet Connectivity continues to expand. Along with this increased market demand is a change in application requirements. Where single channel Ethernet used to be sufficient, many applications such as wireless remote base stations and industrial networking now require DUAL Port functionality for redundancy or system management.
The DP83849I is a highly reliable, feature rich device perfectly suited for industrial applications enabling Ethernet on the factory floor. The DP83849I features two fully independent 10/100 ports for multi-port applications. The unique port switching capability also allows the two ports to be configured to provide fully integrated range extension, media conversion, hardware based failover and port monitoring.
The DP83849I provides optimum flexibility in MPU selection by supporting both MII and RMII interfaces. In addition this device includes a powerful new diagnostics tool to ensure initial network operation and maintenance.
In addition to the TDR scheme, commonly used for detecting faults during installation, the innovative cable diagnostics provides for real time continuous monitoring of the link quality. This allows the system designer to implement a fault prediction mechanism to detect and warn of changing or deteriorating link conditions.
The DP83849I continues to build on its Ethernet expertise and leadership position by providing a powerful combination of features and flexibility, easing Ethernet implementation for the system designer.
관심 가지실만한 유사 제품
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DP83849IVS-EVK — 산업용 온도 범위와 10/100Mb/s를 지원하는 PHYTER™ 이더넷 물리적 계층 트랜시버용 EVM
DP83849IVS 기본 제품 평가 및 고객 데모 보드
ETHERNET-SW — 이더넷 PHY 드라이버 및 툴
텍사스 인스트루먼트의 이더넷 물리적 계층(PHY) 트랜시버용 드라이버는 직렬 관리 인터페이스(MDC/MDIO)를 통한 통신을 지원하여 PHY 레지스터를 구성하고 읽습니다. Linux 및 RTOS 드라이버는 github에서 찾을 수 있습니다.
USB-2-MDIO — USB-2-MDIO Tool v1.0
USB-2-MDIO 소프트웨어 툴을 사용하면 텍사스 인스트루먼트의 이더넷 PHY가 MDIO 상태 및 장치 제어 레지스터에 액세스할 수 있습니다. USB-2-MDIO 툴에는 경량 GUI로 인터페이싱하는 TI의 MSP430 ™ MCU용 LaunchPad™ 개발 키트가 포함되어 있습니다. LaunchPad 개발 키트는 버스에 연결된 PHY의 레지스터를 조작할 수 있는 MDIO 버스 컨트롤러를 구현합니다.
TIDA-00306 — 그리드 애플리케이션용 구리-광섬유 100BASE-FX 또는 1000BASE-X 미디어 컨버터 레퍼런스 디자인
이 레퍼런스 디자인에서는 DP83849 평가 보드를 사용하여 구리선 기반 레거시 장비를 광 네트워크에 쉽게 연결할 수 있는 10/100BASE-TX-10/100BASE-FX 미디어 컨버터를 구현하는 방법론을 자세히 설명합니다. 구리 기반 이더넷(10/100BASE-TX)은 그리드 로컬 영역 네트워크에서 광범위하게 사용되고 있지만 통신 거리가 제한되어 있습니다. 광섬유 네트워킹은 잘 정립되어 있으며 지속적인 비용 절감 효과를 거두고 있습니다. 광섬유 네트워크를 사용하여 광역 장비를 관리하는 것은 실용적이고 비용 효율적이어서 더 빠른 (...)
TIDA-050043 — NXP i.MX 6ULL 프로세서용 통합 전원 공급 장치 레퍼런스 설계
이 레퍼런스 설계는 TPS6521815 PMIC의 NXP™ i.MX 6ULL 애플리케이션 프로세서에 전원을 공급하는 완전한 기능의 개발 보드입니다. 하드웨어 설계는 DDR3L SDRAM(512MB), 32MB 직렬 NOR 플래시, 8GB eMMC 5.0 iNAND, SD 카드 인터페이스 v3.0, 듀얼 채널 100Base-T 이더넷, Type-A 포트를 지원하는 5채널 USB 허브, 마이크로 AB USB OTG, 탑재 가능한 LCD 화면, 추가 입력 및 출력을 위한 확장 커넥터로 구성됩니다.
이 설계는 그리드 통신의 데이터 집신기 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| TQFP (PFC) | 80 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.