ISO1050

활성

절연 5V CAN 트랜시버

지금 주문

데이터 시트

document-pdfAcrobat ISO1050 Isolated CAN Transceiver datasheet (Rev. L) (영어) PDF | HTML

ISO1050

활성

데이터 시트

지금 주문

제품 상세 정보

Rating

Catalog

Isolation rating

Basic

Data rate (max) (Mbps)

1

Working isolation voltage (VIOWM) (Vrms)

400, 850

Surge isolation voltage (VIOSM) (VPK)

4000

Transient isolation voltage (VIOTM) (VPK)

4000

Withstand isolation voltage (VISO) (Vrms)

4243

CMTI (min) (kV/µs)

25

Bus fault voltage (V)

-27 to 40

Common-mode voltage (V)

-12 to 12

Operating temperature range (°C)

-55 to 105

Rating

Catalog

Isolation rating

Basic

Data rate (max) (Mbps)

1

Working isolation voltage (VIOWM) (Vrms)

400, 850

Surge isolation voltage (VIOSM) (VPK)

4000

Transient isolation voltage (VIOTM) (VPK)

4000

Withstand isolation voltage (VISO) (Vrms)

4243

CMTI (min) (kV/µs)

25

Bus fault voltage (V)

-27 to 40

Common-mode voltage (V)

-12 to 12

Operating temperature range (°C)

-55 to 105

SOIC (DW)

16

106.09 mm² 10.3 x 10.3

SOP (DUB)

8

98.8 mm² 9.5 x 10.4

Meets the requirements of ISO11898-2
5000-V RMS isolation (ISO1050DW)
2500-V RMS isolation (ISO1050DUB)
Fail-safe outputs
Low loop delay: 150 ns (typical), 210 ns (maximum)
50-kV/µs typical transient immunity
Bus-fault protection of –27 V to 40 V
Driver (TXD) dominant time-out function
I/O voltage range supports 3.3 V and 5 V microprocessors
Safety-related certifications
- VDE approval per DIN EN IEC 60747-17 (VDE 0884-17)
- UL 1577 approved
- CSA approved for IEC 61010-1, IEC 60601-1
- TUV Reinforced Insulation Approval for EN/UL/CSA 62368-1 (ISO1050DW-Only)
- CQC reinforced insulation per GB4943.1 (ISO1050DW-only)
- Typical 25-year life at rated working voltage (see application report SLLA197 and Life Expectancy vs Working Voltage)

Meets the requirements of ISO11898-2
5000-V RMS isolation (ISO1050DW)
2500-V RMS isolation (ISO1050DUB)
Fail-safe outputs
Low loop delay: 150 ns (typical), 210 ns (maximum)
50-kV/µs typical transient immunity
Bus-fault protection of –27 V to 40 V
Driver (TXD) dominant time-out function
I/O voltage range supports 3.3 V and 5 V microprocessors
Safety-related certifications
- VDE approval per DIN EN IEC 60747-17 (VDE 0884-17)
- UL 1577 approved
- CSA approved for IEC 61010-1, IEC 60601-1
- TUV Reinforced Insulation Approval for EN/UL/CSA 62368-1 (ISO1050DW-Only)
- CQC reinforced insulation per GB4943.1 (ISO1050DW-only)
- Typical 25-year life at rated working voltage (see application report SLLA197 and Life Expectancy vs Working Voltage)

The ISO1050 is a galvanically isolated CAN transceiver that meets the specifications of the ISO11898-2 standard. The device has the logic input and output buffers separated by a silicon oxide (SiO 2) insulation barrier that provides galvanic isolation of up to 5000 V RMS for ISO1050DW and 2500 V RMS for ISO1050DUB. Used in conjunction with isolated power supplies, the device prevents noise currents on a data bus or other circuits from entering the local ground and interfering with or damaging sensitive circuitry.

As a CAN transceiver, the device provides differential transmit capability to the bus and differential receive capability to a CAN controller at signaling rates up to 1 megabit per second (Mbps). The device is designed for operation in especially harsh environments, and it features cross-wire, overvoltage and loss of ground protection from –27 V to 40 V and overtemperature shutdown, as well as –12V to 12V common-mode range.

The ISO1050 is characterized for operation over the ambient temperature range of –55°C to 105°C.

The ISO1050 is a galvanically isolated CAN transceiver that meets the specifications of the ISO11898-2 standard. The device has the logic input and output buffers separated by a silicon oxide (SiO 2) insulation barrier that provides galvanic isolation of up to 5000 V RMS for ISO1050DW and 2500 V RMS for ISO1050DUB. Used in conjunction with isolated power supplies, the device prevents noise currents on a data bus or other circuits from entering the local ground and interfering with or damaging sensitive circuitry.

As a CAN transceiver, the device provides differential transmit capability to the bus and differential receive capability to a CAN controller at signaling rates up to 1 megabit per second (Mbps). The device is designed for operation in especially harsh environments, and it features cross-wire, overvoltage and loss of ground protection from –27 V to 40 V and overtemperature shutdown, as well as –12V to 12V common-mode range.

The ISO1050 is characterized for operation over the ambient temperature range of –55°C to 105°C.

filter

기타 절연 CAN 트랜시버 찾기

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new

대안 비교

다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능

ISO1042

활성

70V 버스 고장 방지 및 유연한 데이터 전송률을 지원하는 절연 CAN 트랜시버 5-kVrms isolated CAN transceiver with data rate up to 5-Mbps CAN FD, higher working voltage, better EMC protection and smaller package option (5.85mm x 7.85mm)

ISO1044

활성

소형 패키지의 절연 CAN FD 트랜시버 3-kVrms isolated CAN transceiver with data rate up to 5-Mbps CAN FD, 58-V bus fault protection and smallest package (4.90mm x 3.91mm)

기술 자료

star

=TI에서 선정한 이 제품의 인기 문서

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.

18개 모두 보기

	유형	직함		날짜
*	Data sheet	ISO1050 Isolated CAN Transceiver datasheet (Rev. L)	PDF \| HTML	2023/10/03
	Application brief	How to Isolate Signal and Power in Isolated CAN Systems (Rev. D)	PDF \| HTML	2025/11/07
	Certificate	CSA Certificate for ISO1050 (Rev. A)		2025/08/20
	Certificate	VDE Certificate for Basic Isolation for DIN EN IEC 60747-17 (Rev. Y)		2025/08/20
	Certificate	CQC Certificate for ISO1050 (Rev. B)		2025/08/19
	Certificate	TUV Certificate for ISO1050 (Rev. A)		2025/08/15
	Application note	Top Design Questions About Isolated CAN Bus Design (Rev. B)	PDF \| HTML	2024/10/24
	Application brief	Simplify the Design of Isolated CAN with Selective Wake ECUs	PDF \| HTML	2023/04/18
	Product overview	Isolating a CAN Bus (Rev. A)	PDF \| HTML	2023/01/13
	Application note	Isolated CAN Solution by Using ISO1050 and SN6501 (Rev. B)	PDF \| HTML	2022/09/22
	Certificate	UL Certificate of Compliance File E181974 Vol 4 Sec 4		2022/08/08
	Application brief	Isolate Your CAN Systems Without Compromising on Performance or Space (Rev. F)	PDF \| HTML	2022/08/04
	White paper	Why are Digital Isolators Certified to Meet Electrical Equipment Standards?		2021/11/16
	White paper	Distance Through Insulation: How Digital Isolators Meet Certification Requiremen	PDF \| HTML	2021/06/11
	Application note	Isolated CAN Reference Design (Rev. E)		2020/07/22
	Application note	How to Design Isolated CAN Systems With Correct Bus Protection		2018/06/19
	EVM User's guide	Isolated CAN EVM User's Guide		2009/07/02
	Application note	Common-Mode Chokes in CAN Networks: Source of Unexpected Transients		2008/01/29

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

ISO1050EVM — ISO1050 절연 CAN 트랜시버 평가 모듈

This multi-functional evaluation module (EVM) is designed for the evaluation of the ISO1050 isolated CAN transceiver. Input and output connections, as well as test points for measurements, are provided to help you use this device which is the world's first CAN transceiver with integrated isolation.

사용 설명서: PDF

TI.com에서 구매 불가

개발 키트

TMDXIDDK379D — 산업용 모터 제어용 C2000 DesignDRIVE 개발 키트

DesignDRIVE 개발 키트(IDDK) 하드웨어는 고전압 3상 모터를 구동하기 위한 최대 전력계를 갖춘 통합 서보 드라이브 설계를 제공하며 다양한 위치 피드백, 전류 센싱 및 제어 토폴로지의 평가를 용이하게 해줍니다.

델타-시그마 싱크 필터 8개, 16비트 또는 12비트 ADC 4개, 윈도우형 비교기 등 C2000™ MCU의 감지 주변 기기를 통해 DesignDRIVE 키트는 션트, 플럭스게이트/홀, 델타-시그마 전류 센싱을를 동시에 지원할 수 있습니다. 위치 피드백을 위해 이 키트는 EnDat, BiSS, T포맷, 증분형 (...)

사용 설명서: PDF | HTML