LM5026
- Current-Mode Control
- Internal 100-V Start-Up Bias Regulator
- 3-A Compound Main Gate Driver
- High Bandwidth Optocoupler Interface
- Programmable Line Undervoltage Lockout (UVLO)
With Adjustable Hysteresis - Versatile Dual Mode Overcurrent Protection With
Hiccup Delay Timer - Programmable Overlap or Deadtime between the
Main and Active Clamp Outputs - Programmable Maximum Duty Cycle Clamp
- Programmable Soft-Start
- Leading Edge Blanking
- Resistor Programmed 1-MHz Capable Oscillator
- Oscillator Sync I/O Capability
- Precision 5-V Reference
The LM5026 PWM controller contains all of the features necessary to implement power converters utilizing the active clamp and reset technique with current-mode control. With the active clamp technique, higher efficiencies and greater power densities can be realized compared to conventional catch winding or RDC clamp and reset techniques. Two control outputs are provided, the main power switch control (OUT_A) and the active clamp switch control (OUT_B). The device can be configured to control either a P-Channel or N-Channel clamp switch. The main gate driver features a compound configuration, consisting of both MOS and Bipolar devices, providing superior gate drive characteristics. The LM5026 can be configured to operate with bias voltages over a wide input range of 8 V to 100 V. Additional features include programmable maximum duty cycle, line undervoltage lockout, cycle-by-cycle current limit, hiccup mode fault operation with adjustable timeout delay, PWM slope compensation, soft-start, 1-MHz capable oscillator with synchronization input and output capability, precision reference, and thermal shutdown.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | LM5026 Active Clamp Current Mode PWM Controller datasheet (Rev. E) | PDF | HTML | 2015. 11. 30 | |
| 선택 가이드 | Power Management Guide 2018 (Rev. R) | 2018. 6. 25 | |||
| 애플리케이션 노트 | Operation and Benefits of Active-Clamp Forward Power Converters | 2007. 3. 22 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
PMP11478 — 30W 능동 클램프 순방향 컨버터 레퍼런스 디자인
PMP11478은 24~36V의 전압 범위를 수용하고 2.5A에서 12V 출력을 제공하는 절연 능동 클램프 순방향 컨버터입니다. 이 설계는 LM5026 능동 클램프 전류 모드 컨트롤러를 사용합니다. 출력 전압 조정은 LMV431 션트 레귤레이터 및 옵토커플러 피드백을 사용하여 유지됩니다. 쇼트키 정류기는 출력 커패시터의 저장된 전하를 사용하여 2.5ms의 홀드업을 허용합니다. 절연 전압은 2250VDC로, 기본 절연 요구 사항을 충족합니다.
PMP22075 — 9V~60V의 폭넓은 입력 범위의 고효율 12V, 5A 액티브 클램프 순방향 레퍼런스 설계
이 순방향 컨버터 레퍼런스 설계는 60W, 12V의 절연형 중간 버스 전압 레일을 위한 것입니다. 9V부터 60V까지 폭넓은 입력 범위에서 작동합니다. 이 설계에는 LM5026, 100V 액티브 클램프 전류 모드 PWM 컨트롤러가 포함되어 있습니다. 고효율을 위해 UCC27511 4-A 및 8A 드라이버가 포함된 자체 구동 보조 정류기를 사용합니다. 고효율과 히컵 보호 기능이 필요한 절연 공급 애플리케이션에서 사용할 수 있습니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WSON (NHQ) | 16 | Ultra Librarian |
| TSSOP (PW) | 16 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.