LM5025
- Internal Start-Up Bias Regulator
- 3-A Compound Main Gate Driver
- Programmable Line Undervoltage Lockout (UVLO)
With Adjustable Hysteresis - Voltage Mode Control With Feed-Forward
- Adjustable Dual-Mode Overcurrent Protection
- Programmable Overlap or Deadtime Between the
Main and Active Clamp Outputs - Volt × Second Clamp
- Programmable Soft-Start
- Leading Edge Blanking
- Single Resistor Programmable Oscillator
- Oscillator UP and DOWN Sync Capability
- Precision 5-V Reference
- Thermal Shutdown
The LM5025 PWM controller contains all of the features necessary to implement power converters using the active clamp and reset technique. The device can be configured to control either a P-channel clamp switch or an N-channel clamp switch. With the active clamp technique, higher efficiencies and greater power densities can be realized compared to conventional catch winding or RDC clamp and reset techniques.
Two control outputs are provided, the main power switch control (OUT_A), and the active clamp switch control (OUT_B). The active clamp output can be configured for either a specified overlap time (for P-channel switch applications) or a specified deadtime (for N_channel applications). The two internal compound gate drivers parallel both MOS and bipolar devices, providing superior gate drive characteristics. This controller is designed for high-speed operation including an oscillator frequency range up to 1 MHz and total PWM and current sense propagation delays less than 100 ns.
The LM5025 includes a high-voltage start-up regulator that operates over a wide input range of 13 V to 90 V. Additional features include: line undervoltage lockout (UVLO), soft-start, oscillator UP and DOWN sync capability, precision reference and thermal shutdown.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | LM5025 Active Clamp Voltage Mode PWM Controller datasheet (Rev. C) | PDF | HTML | 2016/01/14 |
| Selection guide | Power Management Guide 2018 (Rev. R) | 2018/06/25 | ||
| Technical article | Power Tips: A simple circuit to implement smooth soft start for an isolated conver | PDF | HTML | 2017/05/01 | |
| EVM User's guide | AN-1345 LM5025A Evaluation Board (Rev. B) | 2013/05/06 | ||
| EVM User's guide | AN-1542 LM5115A Evaluation Board (Rev. B) | 2013/04/24 | ||
| More literature | Die D/S LM5025 MDC Active Clamp Voltage Mode Pwm Controller | 2012/09/27 | ||
| User guide | LM5025 Isolated Active Clamp Forward Converter Ref Design User Guide | 2012/01/27 | ||
| Application note | Operation and Benefits of Active-Clamp Forward Power Converters | 2007/03/22 | ||
| White paper | PWM DC-DC Cntrllrs w/Built-In Strt-Up Regs Simp Switch Pwr Supply Design | 2005/10/01 | ||
| Application note | Active Clamp Transformer Reset: High Side or Low Side? | 2004/09/17 | ||
| More literature | Seminar 1100 Topic 3 - Design Considerations for Active Clamp and Reset | 2001/02/15 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| TSSOP (PW) | 16 | Ultra Librarian |
| WSON (NHQ) | 16 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.