LMC6482-MIL
- Typical Unless Otherwise Noted
- Rail-to-Rail Input Common-Mode Voltage Range (Ensured Over Temperature)
- Rail-to-Rail Output Swing (Within 20-mV of Supply Rail, 100-kΩ Load)
- Ensured 3-V, 5-V, and 15-V Performance
- Excellent CMRR and PSRR: 82 dB
- Ultralow Input Current: 20 fA
- High Voltage Gain (R L = 500 k Ω): 130 dB
- Specified for 2-kΩ and 600-Ω Loads
- Power-Good Output
- Available in VSSOP Package
The LMC6482-MIL device provides a common-mode range that extends to both supply rails. This rail-to-rail performance combined with excellent accuracy, due to a high CMRR, makes it unique among rail-to-rail input amplifiers. The device is ideal for systems, such as data acquisition, that require a large input signal range. The LMC6482-MIL is also an excellent upgrade for circuits using limited common-mode range amplifiers such as the TLC272 and TLC277.
Maximum dynamic signal range is assured in low voltage and single supply systems by the rail-to-rail output swing of the LMC6482-MIL. The rail-to-rail output swing is ensured for loads down to 600 Ω of the device. Ensured low-voltage characteristics and low-power dissipation make the LMC6482-MIL especially well-suited for battery-operated systems. LMC6482-MIL is also available in a VSSOP package, which is almost half the size of a SOIC-8 device. See the LMC6484 data sheet for a quad CMOS operational amplifier with these same features.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | LMC6482-MIL CMOS Dual Rail-to-Rail Input and Output Operational Amplifier datasheet | PDF | HTML | 2017/06/22 |
| E-book | The Signal e-book: A compendium of blog posts on op amp design topics | 2017/03/28 | ||
| Application note | AN-1234 RSDS™ Flat Panel Display Design Guidelines Part 1 (Rev. A) | 2013/05/06 | ||
| Application note | AN-1237 RSDS™ Flat Panel Display Design Guidelines Part 2 (Rev. A) | 2013/05/06 | ||
| Application note | AN-1515 A Comprehensive Study of the Howland Current Pump (Rev. A) | 2013/04/26 | ||
| Application note | Effect of Heavy Loads on Accuracy and Linearity of Op Amp Circuits (Rev. B) | 2013/04/22 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
OPAMPS-SELGUIDE — 증폭기 제품 선택 가이드 소프트웨어
Included in the results is a summary table of key (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| DIESALE (Y) | — |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치