증폭기 특수 기능 증폭기 트랜스임피던스 증폭기

LMH34400

활성

240MHz, 단일 종단, 트랜스임피던스 증폭기, 통합 클램프 및 주변광 제어

제품 상세 정보

Number of channels 1 GBW (typ) (MHz) 240 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 3.45 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 3 Vos (offset voltage at 25°C) (max) (mV) 70 Rail-to-rail No Features Integrated TIA BW at Acl (MHz) 240 Operating temperature range (°C) -40 to 125 Rating Catalog
Number of channels 1 GBW (typ) (MHz) 240 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 3.45 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 3 Vos (offset voltage at 25°C) (max) (mV) 70 Rail-to-rail No Features Integrated TIA BW at Acl (MHz) 240 Operating temperature range (°C) -40 to 125 Rating Catalog
SOT-5X3 (DRL) 6 2.56 mm² (1.6 mm × 1.6 mm)
  • Integrated gain: 40 kΩ
  • Performance, C PD = 1 pF:
    • Bandwidth: 240 MHz
    • Input-referred noise: 50 nA RMS
    • Rise, fall time: 1.5 ns
  • Integrated ambient light cancellation
  • Integrated 100-mA protection clamp
  • Quiescent current: 20 mA
  • Low-power mode current: 1.5 mA
  • Temperature range: –40°C to +125°C
  • Integrated gain: 40 kΩ
  • Performance, C PD = 1 pF:
    • Bandwidth: 240 MHz
    • Input-referred noise: 50 nA RMS
    • Rise, fall time: 1.5 ns
  • Integrated ambient light cancellation
  • Integrated 100-mA protection clamp
  • Quiescent current: 20 mA
  • Low-power mode current: 1.5 mA
  • Temperature range: –40°C to +125°C

The LMH34400 is the industries’ smallest, fixed-gain, single-ended transimpedance amplifier for light detection and ranging (LIDAR) applications and laser distance measurement systems. The LMH34400 produces 1.0 V PP of output swing and has an input-referred noise of 50 nA RMS.

The LMH34400 has an integrated 100‑mA clamp that protects the amplifier and allows the device to recover rapidly from an overloaded input condition. The LMH34400 also features an integrated ambient light cancellation (ALC) circuit that can be used instead of ac coupling between the photodiode and the amplifier to save board space and system cost. Disable the ALC loop in cases where the frequency signal content to be measured is less than 400 kHz.

When the amplifier is not being used, the LMH34400 can be placed in low-power mode using the EN pin to conserve power. This feature allows several LMH34400 amplifiers to be multiplexed to the input of the next stage of the receive signal chain with the EN control pin serving as the multiplexer select function. The LMH34400 offers a single-ended output and is optimized for use with time-to-digital converter (TDC) based LIDAR systems.

The LMH34400 is the industries’ smallest, fixed-gain, single-ended transimpedance amplifier for light detection and ranging (LIDAR) applications and laser distance measurement systems. The LMH34400 produces 1.0 V PP of output swing and has an input-referred noise of 50 nA RMS.

The LMH34400 has an integrated 100‑mA clamp that protects the amplifier and allows the device to recover rapidly from an overloaded input condition. The LMH34400 also features an integrated ambient light cancellation (ALC) circuit that can be used instead of ac coupling between the photodiode and the amplifier to save board space and system cost. Disable the ALC loop in cases where the frequency signal content to be measured is less than 400 kHz.

When the amplifier is not being used, the LMH34400 can be placed in low-power mode using the EN pin to conserve power. This feature allows several LMH34400 amplifiers to be multiplexed to the input of the next stage of the receive signal chain with the EN control pin serving as the multiplexer select function. The LMH34400 offers a single-ended output and is optimized for use with time-to-digital converter (TDC) based LIDAR systems.

다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 유사한 기능.
LMH32401-Q1 활성 오토모티브, 프로그래머블 게인 차동 출력 고속 트랜스임피던스 증폭기 Automotive Q100 qualified, single channel with programable gain for smaller systems requiring different gain options
LMH32404 활성 통합 멀티플렉싱을 지원하는 4채널 차동 출력 트랜스임피던스 증폭기 Quad-channel, differential output transimpedance amplifier for multichannel optical systems
LMH32401 활성 프로그래머블 게인 차동 출력 고속 트랜스임피던스 증폭기 Differential output transimpedance amplifier with 2-kΩ and 20-kΩ configurable gain options

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
5개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 LMH34400 240-MHz, Single-Ended, Transimpedance Amplifier With Integrated Clamp datasheet (Rev. C) PDF | HTML 2023. 8. 31
Application brief Improving Mobile Robot Vision Sensors With LiDAR PDF | HTML 2024. 8. 14
Application brief LiFi: TI High-Speed Products for Optical Wireless Communication PDF | HTML 2023. 8. 7
Application brief Time of Flight and LIDAR - Optical Front End Design (Rev. A) PDF | HTML 2022. 4. 29
인증서 LMH34400DRLEVM EU RoHS Declaration of Conformity (DoC) 2022. 3. 3

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

LMH34400DRLEVM — LMH34400 평가 모듈, 275MHz, 단일 종단 출력, 트랜스임피던스 증폭기용

LMH34400DRLEVM은 LMH34400DRL 단일 종단 트랜스임피던스 증폭기용 평가 모듈(EVM)입니다. EVM은 표준 테스트 장비와의 간편한 측정을 위한 50Ω 동축 입력 및 출력 연결과 온보드 레귤레이터의 출력에 1VDC 바이어스를 적용하는 옵션을 제공합니다. 입력은 기본적으로 2kΩ 저항을 통해 전류로 변환되는 전압 신호를 수신하도록 구성됩니다. 또한 EVM에는 출력 바이어스 전압, 입력 바이어스 전류 취소 및 디바이스 셧다운 기능을 제어하기 위한 간편한 점퍼가 포함되어 있습니다.

사용 설명서: PDF | HTML
지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
시뮬레이션 모델

LMH34400 PSpice Model

SBOMC58.ZIP (32 KB) - PSpice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

TINA-TI Reference Circuit

SBOMC57 (14136 KB) - TINA-TI 레퍼런스 설계
지원되는 제품 및 하드웨어
패키지 CAD 기호, 풋프린트 및 3D 모델
SOT-5X3 (DRL) 6 Ultra Librarian

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상