LP87563-Q1
- Qualified for Automotive Applications
- AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature
- Device HBM ESD Classification Level 2
- Device CDM ESD Classification Level C4B
- Input Voltage: 2.8 V to 5.5 V
- Output Voltage: 0.6 V to 3.36 V
- Four High-Efficiency
Step-Down DC/DC Converter Cores:
- Maximum Output Current: 16 A (4 A per Phase)
- Programmable Output Voltage Slew-Rate: 0.5 mV/µs to 10 mV/µs
- Switching Frequency: 2 MHz
- Spread-Spectrum Mode and Phase Interleaving
- Configurable General Purpose I/O (GPIOs)
- I2C-Compatible Interface That Supports Standard (100 kHz), Fast (400 kHz), Fast+ (1 MHz), and High-Speed (3.4 MHz) Modes
- Interrupt Function With Programmable Masking
- Programmable Power-Good Signal (PGOOD)
- Output Short-Circuit and Overload Protection
- Overtemperature Warning and Protection
- Overvoltage Protection (OVP) and Undervoltage Lockout (UVLO)
The LP8756x-Q1 device is designed to meet the power-management requirements of the latest processors and platforms in various automotive power applications. The device contains four step-down DC/DC converter cores, which are configured as a 4-phase output, 3-phase and 1-phase outputs, 2-phase and 2-phase outputs, one 2-phase and two 1-phase outputs, or four 1-phase outputs. The device is controlled by an I2C-compatible serial interface and by enable signals.
The automatic pulse-width-modulation (PWM) to pulsed-frequency-modulation (PFM) operation (AUTO mode), together with the automatic phase adding and phase shedding, maximizes efficiency over a wide output-current range. The LP8756x-Q1 supports remote differential-voltage sensing for multiphase outputs to compensate IR drop between the regulator output and the point-of-load (POL) improving the accuracy of the output voltage. The switching clock can be forced to PWM mode and also synchronized to an external clock to minimize the disturbances.
The LP8756x-Q1 device supports load-current measurement without the addition of external current-sense resistors. The device also supports programmable start-up and shutdown delays and sequences synchronized to enable signals. The sequences can include GPIO signals to control external regulators, load switches, and processor reset. During start-up and voltage change, the device controls the output slew rate to minimize output-voltage overshoot and in-rush current.
추가 정보 요청
고장 모드, 영향 및 진단 분석(FMEDA), 안전 분석 보고서 및 안전 매뉴얼과 같은 기능 안전 정보를 사용할 수 있습니다. 지금 요청
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 | |
|---|---|---|---|---|---|---|
| * | 데이터 시트 | LP8756x-Q1 16-A Buck Converter With Integrated Switches datasheet | PDF | HTML | 2018. 3. 29 | ||
| * | 사용 설명서 | LP875630C-Q1 Technical Reference Manual (Rev. A) | PDF | HTML | 2025. 6. 12 | ||
| * | 사용 설명서 | LP875630-Q1 Technical Reference Manual | 2018. 10. 4 | |||
| 사용 설명서 | LP8756xQ1 Configuration Guide (Rev. A) | PDF | HTML | 2025. 7. 31 | |||
| 설계 가이드 | Power Supply Design for Semidrive X9SP (X9HP Compatible) Using LP8752-Q1 and LP8756-Q1 (Rev. A) | PDF | HTML | 2025. 1. 2 | |||
| Application brief | The Benefits of FlexPower PMIC Devices (Rev. B) | PDF | HTML | 2020. 11. 23 | |||
| 애플리케이션 노트 | How to Design Flexible Processor Power Systems Using PMICs (Rev. B) | 2020. 1. 27 | ||||
| 애플리케이션 노트 | Stability Considerations for LP8756x-Q1 and LP8752x-Q1 | PDF | HTML | 2019. 6. 4 |
설계 및 개발
전원 공급 솔루션
LP87563-Q1을 포함하는 솔루션을 살펴보세요. TI는 칩(SoC), 프로세서, 마이크로컨트롤러, 센서 또는 FPGA(Field Programmable Gate Array)의 TI와 비TI 시스템을 위한 전원 공급 솔루션을 제공합니다.
LP87563Q1EVM — 스위치가 통합된 삼중 출력 8A + 4A + 4A 벅 컨버터 평가 모듈
LP87563Q1EVM은 텍사스 인스트루먼트의 통합 회로 LP87563-Q1을 보여줍니다.
LP87563-Q1은 차량용 애플리케이션의 최신 애플리케이션 프로세서의 전원 관리 요구 사항을 충족하도록 설계된 고성능 다중 위상 스텝다운 컨버터입니다. 이 장치에는 이중 위상 벅 컨버터와 두 개의 단일 위상 벅 컨버터로 구성된 스텝다운 DC-DC 컨버터 코어 4개가 포함되어 있습니다. LP87563-Q1은 솔루션 크기와 효율성을 탁월하게 조합하여 최대 8A + 4A + 4A의 부하 전류를 지원할 수 있습니다. 이 장치는 PC 및 제공된 (...)
PEET-GUI — TPS6594-Q1, LP8756-Q1, LP8758, LP8770 및 TPS650330-Q1용 효율성 예측 툴
PMP30819 — PMIC 및 LDO을 사용하는 3개 출력의 오토모티브 전력 공급 레퍼런스 설계
TIPA-020002 — LP8752-Q1 및 LP8756-Q1을 사용하는 Semidrive X9SP(X9HP 호환)용 전원 공급 장치 설계
TIPA-050039 — LP875701-Q1을 사용한 Mobileye EyeQ4 전원 공급 장치 설계
이 전원 공급 장치 설계에는 LP875701-Q1 전원 관리 IC를 사용하는 Mobileye EyeQ4 Mid SoC(System-on-Chip) 코어 레일의 전원 고려 사항에 대해 자세히 설명합니다. 이 전원 설계는 입력 전압을 3.3V 또는 5V(+/-5%)로 가정합니다. 예를 들어 차량 배터리와 같이 시스템 입력 전압이 더 높은 경우 사전 레귤레이터로 벅 컨버터를 사용하여 3.3V 또는 5V의 공급 전압을 생성해야 합니다.
LP875701-Q1에는 단일 1V 출력 다중 위상 컨버터로 작동하도록 구성된 4개의 벅 컨버터가 (...)
TIPA-050040 — LP875761-Q1을 사용한 Mobileye EyeQ4 고전력 공급 장치 설계
이 전원 공급 장치 설계는 LP875761-Q1 전원 관리 IC를 사용하는 Mobileye EyeQ4® High SoC(System-on-Chip) 코어 레일의 전원 고려 사항을 자세히 설명합니다. 이 전원 솔루션은 입력 전압을 3.3V 또는 5V( ± 5%)로 가정합니다. 예를 들어 차량 배터리와 같이 시스템 입력 전압이 더 높은 경우 사전 레귤레이터로 벅 컨버터를 사용하여 3.3V 또는 5V의 공급 전압을 생성해야 합니다.
LP875761-Q1에는 단일 1V 출력 다중 위상 컨버터로 작동하도록 구성된 4개의 벅 컨버터가 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN-HR (RNF) | 26 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.