MSPM0H3215

활성

5V 공급, 32KB 플래시, 8KB SRAM 및 12비트 ADC를 지원하는 32MHz Arm® Cortex®-M0+ MCU

제품 상세 정보

CPU Arm Cortex-M0+ Frequency (MHz) 32 Flash memory (kByte) 32 RAM (kByte) 8 ADC type 12-bit SAR Features 5-V-tolerant I/Os, General purpose UART 3 Security Hardware-enforced isolation, Secure debug, Secure storage, Software IP protection Number of ADC channels 12, 13, 15, 18, 24, 27 SPI 1 Hardware accelerators 0 Edge AI enabled No Operating temperature range (°C) -40 to 125 Rating Catalog Operating system BareMetal (No OS) Nonvolatile memory (kByte) 32 Number of GPIOs 21, 25, 41, 45 Number of I2Cs 2
CPU Arm Cortex-M0+ Frequency (MHz) 32 Flash memory (kByte) 32 RAM (kByte) 8 ADC type 12-bit SAR Features 5-V-tolerant I/Os, General purpose UART 3 Security Hardware-enforced isolation, Secure debug, Secure storage, Software IP protection Number of ADC channels 12, 13, 15, 18, 24, 27 SPI 1 Hardware accelerators 0 Edge AI enabled No Operating temperature range (°C) -40 to 125 Rating Catalog Operating system BareMetal (No OS) Nonvolatile memory (kByte) 32 Number of GPIOs 21, 25, 41, 45 Number of I2Cs 2
VQFN (RHB) 32 25 mm² (5 mm × 5 mm) WQFN (RUK) 20 9 mm² (3 mm × 3 mm) LQFP (PT) 48 81 mm² (9 mm × 9 mm)
  • Core
    • Arm 32-bit Cortex-M0+ CPU, frequency up to 32MHz
  • Operating characteristics
    • Extended temperature: –40°C to 125°C
    • Supply voltage range: 4.5V to 5.5V
  • Memories
    • Up to 64KB of flash
    • 8KB of SRAM
  • High-performance analog peripherals
    • One analog-to-digital converter (ADC) with up to 27 total external channels, 1.6-Msps@12-bit
    • 4.05V internal ADC voltage reference (VREF)
    • Integrated temperature sensor
    • Integrated supply monitor
  • Optimized low-power modes
    • RUN: 126µA/MHz (CoreMark)
    • SLEEP: 2516uA at 32MHz
    • STOP: 1442µA at 4MHz and 674uA at 32kHz
    • STANDBY: 3.8µA with SRAM retention
  • Intelligent digital peripherals
    • 3-channel DMA controller
    • Five timers supporting up to 18 PWM channels

      • One 16-bit advanced timers with deadband support up to 8 PWM channels
      • One 16-bit general purpose timer with 4 capture/compares
      • Two 16-bit general purpose timers with 2 capture/compares
      • One 16-bit general purpose timer with 2 capture/compares and QEI
    • Windowed watchdog timer (WWDT)
    • Independent watch dog timer (IWDT)
    • RTC with alarm and calendar mode
    • BEEPER generating 1/2/4/8kHz square wave to drive an external beeper
  • Enhanced communication interfaces
    • Three UART interfaces supporting low-power operation in STANDBY mode
      • One advanced UART instance supporting LIN, IrDA, DALI, Smart Card, & Manchester coding
    • Two I2C interfaces supporting FM+ (1Mbit/s), SMBus/PMBus, and wakeup from STOP mode,
    • One SPI supporting up to 16Mbit/s
  • Clock system
    • Internal 32MHz oscillator with -2.1% to 1.6% accuracy (SYSOSC)
    • Internal 32kHz low-frequency oscillator (LFOSC) with up to ±3% accuracy
    • External 4MHz to 32MHz crystal oscillator (HFXT)
    • External 32kHz crystal oscillator (LFXT)
    • External Low Frequency (LF) and High Frequency (HF) digital clock inputs
  • Data integrity
    • Flexible firewalls for protecting code and data
    • Cyclic redundancy checker (CRC-16)
  • Flexible I/O features
    • Up to 45 GPIOs
    • True 5V IOs
  • Development support
    • 2-pin serial wire debug (SWD)
  • Package options
    • 48-pin LQFP (PT), VQFN (RGZ)
    • 32-pin VQFN (RHB)
    • 28-pin VSSOP (DGS28)
    • 24-pin VQFN (RGE)
    • 20-pin VSSOP (DGS20), WQFN (RUK)
  • Family members (also see Device Comparison)
    • MSPM0H3216: 64KB of flash, 8KB of RAM
    • MSPM0H3215: 32KB of flash, 8KB of RAM
  • Development kits and software (also see Tools and Software)
    • LP-MSPM0H3216 LaunchPad™ development kit
    • MSP Software Development Kit (SDK)
  • Core
    • Arm 32-bit Cortex-M0+ CPU, frequency up to 32MHz
  • Operating characteristics
    • Extended temperature: –40°C to 125°C
    • Supply voltage range: 4.5V to 5.5V
  • Memories
    • Up to 64KB of flash
    • 8KB of SRAM
  • High-performance analog peripherals
    • One analog-to-digital converter (ADC) with up to 27 total external channels, 1.6-Msps@12-bit
    • 4.05V internal ADC voltage reference (VREF)
    • Integrated temperature sensor
    • Integrated supply monitor
  • Optimized low-power modes
    • RUN: 126µA/MHz (CoreMark)
    • SLEEP: 2516uA at 32MHz
    • STOP: 1442µA at 4MHz and 674uA at 32kHz
    • STANDBY: 3.8µA with SRAM retention
  • Intelligent digital peripherals
    • 3-channel DMA controller
    • Five timers supporting up to 18 PWM channels

      • One 16-bit advanced timers with deadband support up to 8 PWM channels
      • One 16-bit general purpose timer with 4 capture/compares
      • Two 16-bit general purpose timers with 2 capture/compares
      • One 16-bit general purpose timer with 2 capture/compares and QEI
    • Windowed watchdog timer (WWDT)
    • Independent watch dog timer (IWDT)
    • RTC with alarm and calendar mode
    • BEEPER generating 1/2/4/8kHz square wave to drive an external beeper
  • Enhanced communication interfaces
    • Three UART interfaces supporting low-power operation in STANDBY mode
      • One advanced UART instance supporting LIN, IrDA, DALI, Smart Card, & Manchester coding
    • Two I2C interfaces supporting FM+ (1Mbit/s), SMBus/PMBus, and wakeup from STOP mode,
    • One SPI supporting up to 16Mbit/s
  • Clock system
    • Internal 32MHz oscillator with -2.1% to 1.6% accuracy (SYSOSC)
    • Internal 32kHz low-frequency oscillator (LFOSC) with up to ±3% accuracy
    • External 4MHz to 32MHz crystal oscillator (HFXT)
    • External 32kHz crystal oscillator (LFXT)
    • External Low Frequency (LF) and High Frequency (HF) digital clock inputs
  • Data integrity
    • Flexible firewalls for protecting code and data
    • Cyclic redundancy checker (CRC-16)
  • Flexible I/O features
    • Up to 45 GPIOs
    • True 5V IOs
  • Development support
    • 2-pin serial wire debug (SWD)
  • Package options
    • 48-pin LQFP (PT), VQFN (RGZ)
    • 32-pin VQFN (RHB)
    • 28-pin VSSOP (DGS28)
    • 24-pin VQFN (RGE)
    • 20-pin VSSOP (DGS20), WQFN (RUK)
  • Family members (also see Device Comparison)
    • MSPM0H3216: 64KB of flash, 8KB of RAM
    • MSPM0H3215: 32KB of flash, 8KB of RAM
  • Development kits and software (also see Tools and Software)
    • LP-MSPM0H3216 LaunchPad™ development kit
    • MSP Software Development Kit (SDK)

MSPM0H321x microcontrollers (MCUs) are part of the MSP highly-integrated 5V power supply and 32-bit MCU family based on the enhanced Arm Cortex-M0+ core platform operating at up to 32MHz frequency. These cost-optimized MCUs offer high-performance analog peripheral integration, support extended temperature ranges from -40°C to 125°C, and operate with supply voltages from 4.5V.

The MSPM0H321x devices provide up to 64KB embedded flash program memory with 8KB SRAM. These MCUs incorporate a high-speed on-chip oscillator with an accuracy of -2.1% to 1.6%, eliminating the need for an external crystal. Additional features include a 3-channel DMA, CRC-16 accelerator, and a variety of high-performance analog peripherals such as one 12-bit 1.6Msps ADC with VDD as the voltage reference, and an on-chip temperature sensor. These devices offer intelligent digital peripherals such as one 16-bit advanced timer, four 16-bit general purpose timer, one windowed watchdog timer, one independent watchdog timer, and a real-time clock (RTC). These devices also offer a variety of communication peripherals including three UART, one SPI, and two I2C. These communication peripherals offer protocol support for LIN, IrDA, DALI, Manchester, smart card, SMBus, and PMBus.

The TI MSPM0 family of low-power MCUs consists of devices with varying degrees of analog and digital integration enabling customers to find the MCU that meets their project needs. The architecture combined with extensive low-power modes is optimized to achieve extended battery life in portable measurement applications.

MSPM0H321x MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get the design started quickly. Development kits include a LaunchPad™ kit available for purchase and design files for a target-socket board. TI also provides a free MSP Software Development Kit (SDK), which is available as a component of Code Composer Studio™ IDE desktop and cloud version within the TI Resource Explorer. MSPM0 MCUs are also supported by extensive online collateral, training with MSP Academy, and online support through the TI E2E™ support forums.

For complete module descriptions, see the MSPM0H-Series 32MHz Microcontrollers Technical Reference Manual.

MSPM0H321x microcontrollers (MCUs) are part of the MSP highly-integrated 5V power supply and 32-bit MCU family based on the enhanced Arm Cortex-M0+ core platform operating at up to 32MHz frequency. These cost-optimized MCUs offer high-performance analog peripheral integration, support extended temperature ranges from -40°C to 125°C, and operate with supply voltages from 4.5V.

The MSPM0H321x devices provide up to 64KB embedded flash program memory with 8KB SRAM. These MCUs incorporate a high-speed on-chip oscillator with an accuracy of -2.1% to 1.6%, eliminating the need for an external crystal. Additional features include a 3-channel DMA, CRC-16 accelerator, and a variety of high-performance analog peripherals such as one 12-bit 1.6Msps ADC with VDD as the voltage reference, and an on-chip temperature sensor. These devices offer intelligent digital peripherals such as one 16-bit advanced timer, four 16-bit general purpose timer, one windowed watchdog timer, one independent watchdog timer, and a real-time clock (RTC). These devices also offer a variety of communication peripherals including three UART, one SPI, and two I2C. These communication peripherals offer protocol support for LIN, IrDA, DALI, Manchester, smart card, SMBus, and PMBus.

The TI MSPM0 family of low-power MCUs consists of devices with varying degrees of analog and digital integration enabling customers to find the MCU that meets their project needs. The architecture combined with extensive low-power modes is optimized to achieve extended battery life in portable measurement applications.

MSPM0H321x MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get the design started quickly. Development kits include a LaunchPad™ kit available for purchase and design files for a target-socket board. TI also provides a free MSP Software Development Kit (SDK), which is available as a component of Code Composer Studio™ IDE desktop and cloud version within the TI Resource Explorer. MSPM0 MCUs are also supported by extensive online collateral, training with MSP Academy, and online support through the TI E2E™ support forums.

For complete module descriptions, see the MSPM0H-Series 32MHz Microcontrollers Technical Reference Manual.

다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
80개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 MSPM0H321x Mixed-Signal Microcontrollers datasheet (Rev. B) PDF | HTML 2026. 3. 10
* 사용 설명서 MSPM0 H-Series 32-MHz Microcontrollers Technical Reference Manual (Rev. B) PDF | HTML 2026. 4. 22
* 정오표 MSPM0H3216 Mixed-Signal Microcontrollers Errata (Rev. B) PDF | HTML 2026. 2. 21
애플리케이션 노트 MSPM0 C-Series MCU Hardware Development Guide (Rev. C) PDF | HTML 2026. 3. 19
애플리케이션 노트 MSPM0 H-Series MCUs Hardware Development Guide PDF | HTML 2025. 12. 8
애플리케이션 노트 EMC Improvement Guide for MSPM0 (Rev. A) PDF | HTML 2025. 12. 2
애플리케이션 노트 MSPM0 ADC Noise Analysis and Application (Rev. A) PDF | HTML 2025. 11. 14
서브시스템 설계 ADC to I2C (Rev. A) PDF | HTML 2025. 9. 10
서브시스템 설계 DMA Ping Pong With ADC (Rev. B) PDF | HTML 2025. 9. 9
서브시스템 설계 ADC to UART (Rev. A) PDF | HTML 2025. 9. 9
애플리케이션 노트 MSPM0 Bootloader Implementation (Rev. D) PDF | HTML 2025. 9. 4
사용 설명서 MSPM0 MCUs Development Guide (Rev. G) PDF | HTML 2025. 8. 27
서브시스템 설계 ADC to SPI (Rev. A) PDF | HTML 2025. 8. 27
서브시스템 설계 Power Sequencer (Rev. A) PDF | HTML 2025. 8. 25
서브시스템 설계 Parallel IO to UART Bridge (Rev. A) PDF | HTML 2025. 8. 21
서브시스템 설계 5V Interface (Rev. A) PDF | HTML 2025. 8. 20
서브시스템 설계 Data Sensor Aggregator Subsystem Design (Rev. A) PDF | HTML 2025. 8. 20
서브시스템 설계 Function Generator Using DAC8 (Rev. A) PDF | HTML 2025. 8. 15
서브시스템 설계 Task Scheduler (Rev. A) PDF | HTML 2025. 8. 15
서브시스템 설계 UART to SPI Bridge (Rev. B) PDF | HTML 2025. 8. 15
서브시스템 설계 IO Expander With SPI, I2C, and UART (Rev. A) PDF | HTML 2025. 8. 14
서브시스템 설계 Emulate EEPROM with FLASH (Type A) (Rev. A) PDF | HTML 2025. 8. 13
서브시스템 설계 LED Driver With PWM (Rev. A) PDF | HTML 2025. 8. 12
애플리케이션 노트 Migration Guide From STM32 to Arm-Based MSPM0 (Rev. B) PDF | HTML 2025. 8. 11
서브시스템 설계 Emulate EEPROM With FLASH (Type B) (Rev. A) PDF | HTML 2025. 8. 6
서브시스템 설계 Frequency Counter: Tone Detection (Rev. A) PDF | HTML 2025. 8. 6
서브시스템 설계 I2C to SPI Bridge (Rev. A) PDF | HTML 2025. 8. 5
서브시스템 설계 Scanning Comparator (Rev. A) PDF | HTML 2025. 8. 5
애플리케이션 노트 MSPM0 MCUs Quick Reference Guide (Rev. B) PDF | HTML 2025. 8. 4
서브시스템 설계 I2C to UART Subsystem Design (Rev. A) PDF | HTML 2025. 8. 4
서브시스템 설계 MCU Design Techniques: ADC to PWM (Rev. A) PDF | HTML 2025. 8. 1
사용 설명서 MSPM0 Gauge L2 Solution Guide (Rev. B) PDF | HTML 2025. 6. 30
Product overview MSPM0 MCUs: More Options, Unlimited Possibilities (Rev. B) PDF | HTML 2025. 6. 29
애플리케이션 노트 Capturing PWM 0% to 100% Duty Cycle with MSPM0 MCU PDF | HTML 2025. 6. 12
Application brief How Does MSPM0H321x Fit into Battery Power Adapters? PDF | HTML 2025. 6. 4
사용 설명서 Migration Guide From Microchip to MSPM0 (Rev. A) PDF | HTML 2025. 6. 4
애플리케이션 노트 Migration Guide From MSP430 MCUs to MSPM0 MCUs (Rev. B) PDF | HTML 2025. 6. 2
사용 설명서 Migration Guide From Renesas RL78 to Arm-Based MSPM0 (Rev. A) PDF | HTML 2025. 5. 29
애플리케이션 노트 Migration Guide From STM8 to MSPM0 (Rev. A) PDF | HTML 2025. 5. 21
애플리케이션 노트 Cooling FAN Controller with MSPM0 PDF | HTML 2025. 4. 15
애플리케이션 노트 BQ2562x Control Based on MSPM0 Through I2C PDF | HTML 2025. 4. 10
백서 MSPM0 MCU Advantages in Automotive Application PDF | HTML 2025. 3. 11
애플리케이션 노트 LIN Basics and Implementation on MSPM0 PDF | HTML 2025. 2. 21
애플리케이션 노트 Laser Speckle Reduction Solution in Projector based on MSPM0 MCU PDF | HTML 2025. 2. 20
사용 설명서 Migration Guide From NXP to MSPM0 PDF | HTML 2025. 2. 3
애플리케이션 노트 Closed Loop Constant Power Drive to Simplify Heater Element Control and Extend Battery Life PDF | HTML 2025. 1. 29
애플리케이션 노트 MSPM0G3507 Low Power Test and Guidance PDF | HTML 2024. 10. 18
애플리케이션 노트 Understanding the MSPM0 Debug Subsystem PDF | HTML 2024. 9. 23
애플리케이션 노트 A2L Refrigerant Standard Overview and TI Mitigation Control Board Designs for Designers PDF | HTML 2024. 9. 16
애플리케이션 노트 How to Charge With Smart Battery Using MCU in Between to Translate SMBus/I2C PDF | HTML 2024. 8. 9
애플리케이션 노트 BQ769x2 Control Based on MSPM0 Through I2C (Rev. A) PDF | HTML 2024. 7. 12
애플리케이션 노트 Sensored Brushed DC Motor Control Based on MSPM0 PDF | HTML 2024. 6. 28
애플리케이션 노트 MSPM0 Gauge L1 Solution Guide (Rev. A) PDF | HTML 2024. 6. 4
Application brief Automotive Seat Comfort Module Using MSPM0 PDF | HTML 2024. 5. 1
애플리케이션 노트 PGA460 Control Based on MSPM0 for Distance Detection PDF | HTML 2024. 4. 17
애플리케이션 노트 Realization of Password-Protected Debug Based on Software PDF | HTML 2024. 3. 6
애플리케이션 노트 Isolated Loop Powered 4 to 20mA Field Transmitter Designs PDF | HTML 2024. 2. 1
기술 문서 진화하는 EV 충전 시장에서 호환성이 중요한 이유 PDF | HTML Download English Version 2024. 1. 26
Product overview Realizing UWB Passive Entry Passive Start (PEPS) Design with MSPM0 MCU PDF | HTML 2024. 1. 12
애플리케이션 노트 MSPM0 - Advanced Control Timer Helps for Better Control and Better Digital Output PDF | HTML 2024. 1. 10
Application brief MSPM0Cx- Toothbrush and Shaver PDF | HTML 2023. 12. 27
Product overview Realizing HVAC FAN Control Design with MSPM0 MCU PDF | HTML 2023. 12. 21
설계 가이드 Low-Cost Blood Pressure and Heart Rate Monitor Reference Design PDF | HTML 2023. 12. 19
애플리케이션 노트 MSPM0 Enables Cost-Effective Field Transmitter Applications PDF | HTML 2023. 12. 15
Application brief Low-Cost MSPM0C MCUs as an I/O Expander PDF | HTML 2023. 12. 11
애플리케이션 노트 Operating Time of MSPM0 Powered by a Capacitor PDF | HTML 2023. 10. 3
Application brief Build Scalability in Cordless Power and Garden Tools Using Low-Cost MSPM0 MCUs (Rev. A) PDF | HTML 2023. 9. 27
Application brief Using MSPM0 MCUs to Design Trapezoidal-Based BLDC Motor Controllers (Rev. A) PDF | HTML 2023. 9. 14
Application brief Optimized H-Bridge Driver Control for Stepper and BDC Motors Using MSPM0 MCUs (Rev. A) PDF | HTML 2023. 9. 6
애플리케이션 노트 Dual-Ray Smoke Detector with the TPS8802 and MSPM0 MCUs PDF | HTML 2023. 8. 22
애플리케이션 노트 MSPM0 Live Firmware Update (LFU) Bootloader Implementation PDF | HTML 2023. 7. 11
애플리케이션 노트 EEPROM Emulation Type A Solution PDF | HTML 2023. 4. 18
애플리케이션 노트 EEPROM Emulation Type B Design PDF | HTML 2023. 4. 11
Application brief Increasing Flexibility in Your Electrical Thermometer Designs With Low-Cost MSPM PDF | HTML 2023. 3. 2
Application brief Simplifying Design in True Wireless Stereo Control With a Low-Cost MSPM0 MCU PDF | HTML 2023. 3. 2
Application brief Optimizing Field Sensor and Transmitter Applications With MSPM0 MCUs PDF | HTML 2023. 3. 2
Application brief Increasing Flexibility in Your Battery Management Designs With a Low-Cost MSPM0 PDF | HTML 2023. 3. 2
Application brief Simplifying Pulse Oximeter Designs With Low-Cost Highly Integrated MSPM0 MCUs PDF | HTML 2023. 3. 2
애플리케이션 노트 Make System Design Easy With MSPM0 Precision Analog PDF | HTML 2023. 2. 22
백서 MSPM0: Idea to Product With Easy-to-Use Tools, Software, and Academy PDF | HTML 2023. 2. 22

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

LP-MSPM0H3216 — 32MHz Arm® Cortex®-M0+ 마이크로컨트롤러용 MSPM0H3216 LaunchPad™ 개발 키트

MSPM0H3216 LaunchPad™ 개발 키트는 MSPM0H3216 MCU(마이크로컨트롤러)를 간편하게 평가할 수 있는 EVM(평가 모듈)입니다. LaunchPad 키트에는 프로그래밍과 디버깅을 위한 온보드 디버그 프로브를 포함하여 MSPM0H321x 마이크로컨트롤러 플랫폼에서 개발을 시작하는 데 필요한 모든 것이 포함되어 있습니다. 보드에는 간단한 사용자 인터페이스를 빠르게 통합할 수 있는 온보드 버튼, LED, RGB LED도 있습니다.

MSPM0H3216은 최대 32MHz의 주파수를 가진 Arm® Cortex® 32비트 (...)

사용 설명서: PDF | HTML
지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
하드웨어 프로그래밍 도구

C-GANG — 독립 실행 및 통합 플래싱을 위한 빠르고 안정적인 갱 프로그래밍 솔루션

C-GANG은 한 번에 최대 6개의 동일한 대상을 프로그래밍할 수 있는 저비용 갱 프로그래머입니다. MSPM0, MSP430 및 C2000 장치를 비롯한 다양한 TI 마이크로컨트롤러와 호환됩니다.

지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
소프트웨어 개발 키트(SDK)

MSPM0-SDK — MSPM0 Software Development Kit (SDK)

MSPM0 SDK는 단일 소프트웨어 패키지 아래에 있는 MSPM0 MCU 플랫폼용 애플리케이션 개발을 가속화하는 궁극의 소프트웨어, 툴 및 문서 모음을 제공합니다.

지원되는 제품 및 하드웨어
IDE, 구성, 컴파일러 또는 디버거

CCSTUDIO — Code Composer Studio integrated development environment (IDE)

CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)

지원되는 제품 및 하드웨어
IDE, 구성, 컴파일러 또는 디버거

CCSTUDIO-OPENOCD — OpenOCD Binary Releases

Pre-built binaries for the popular open-source OpenOCD debug stack.
지원되는 제품 및 하드웨어
IDE, 구성, 컴파일러 또는 디버거

MSP-ZERO-CODE-STUDIO — Graphical development environment for designing applications for MSP microcontrollers

MSP Zero Code Studio는 펌웨어 개발을 간소화하는 시각적 설계 환경으로, 코딩과 IDE 없이 짧은 시간 내에 마이크로컨트롤러 애플리케이션을 구성, 개발 및 실행할 수 있습니다. 독립적으로 다운로드하여 사용하거나, 클라우드에서 사용할 수 있습니다.

지원되는 제품 및 하드웨어
IDE, 구성, 컴파일러 또는 디버거

SYSCONFIG — Standalone desktop version of SysConfig

CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.

SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)

지원되는 제품 및 하드웨어
시작하기

CCSTUDIO-STARTHUB — Example application browser

Explore a vast library of example projects, categorized by application type, with support for multiple development environments
지원되는 제품 및 하드웨어
시작하기

TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud

From evaluation to deployment the TI Developer Zone provides a comprehensive range of software, tools and training to ensure that you have everything you need for each stage of the development process.
지원되는 제품 및 하드웨어
소프트웨어 프로그래밍 도구

UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UniFlash는 TI의 광범위한 CCStudio™ 개발 에코시스템의 일부로, TI 마이크로컨트롤러 및 무선 연결 장치의 온칩 플래시와 TI 프로세서의 온보드 플래시를 프로그래밍하기 위한 소프트웨어 도구입니다. UniFlash는 그래픽 및 명령줄 인터페이스를 모두 제공하며, 데스크톱 또는 클라우드 환경에서 실행할 수 있습니다.

UniFlash는 CCStudio 개발자 영역의 클라우드에서 실행하거나 Windows®, Linux®, macOS® 컴퓨터에서 다운로드해 사용할 수 있습니다.

macOS는 mmWave, AMx, K2G 및 (...)

지원되는 제품 및 하드웨어
패키지 CAD 기호, 풋프린트 및 3D 모델
VQFN (RHB) 32 Ultra Librarian
WQFN (RUK) 20 Ultra Librarian
LQFP (PT) 48 Ultra Librarian

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상