제품 상세 정보

Rating Catalog Operating temperature range (°C) to
Rating Catalog Operating temperature range (°C) to
PQFP (NBK) 160 973.44 mm² 31.2 x 31.2
  • 100% compatible with VxWorks®, VRTX®, QNX® Neutrino,
    pSOS+™, and other popular real-time executives
    and operating system kernels
  • Intel486 instruction set compatible (protected mode
    only) with optimized performance
  • CPU includes a 1 Kbyte Instruction Cache
  • Operation at 25 MHz with 5V supply
  • Low cost 160-pin PQFP package
  • Industry standard interrupt controller, timers, real time
    clock, UART with IrDA v1.0 (Infrared Data Association) port
  • Intel 82365 compatible PCMCIA interface
  • Protected WATCHDOGTM timer
  • Optimized DRAM Controller (supports two banks, up to
    8 Mbytes each)
  • Up to nine versatile, programmable chip selects
  • Glueless interface to ISA peripherals
  • Arbitration support for auxiliary processor
  • Four external DMA channels (max. transfer rate of 25
    MByte/sec @ 25 MHz) support many transfer modes
  • High performance IEEE 1284 (ECP) Bidirectional Parallel Port
  • MICROWIRE™/Access.bus synchronous serial
    interfaces
  • LCD Controller for an up to 4 grey scale supertwist
    Liquid Crystal Displays up to 480 X 320
  • Reconfigurable I/O: Up to 29 I/O pins can be used as
    general purpose bidirectional I/O lines
  • Flexible, programmable, multilevel power saving modes
    maximize power savings

  • 100% compatible with VxWorks®, VRTX®, QNX® Neutrino,
    pSOS+™, and other popular real-time executives
    and operating system kernels
  • Intel486 instruction set compatible (protected mode
    only) with optimized performance
  • CPU includes a 1 Kbyte Instruction Cache
  • Operation at 25 MHz with 5V supply
  • Low cost 160-pin PQFP package
  • Industry standard interrupt controller, timers, real time
    clock, UART with IrDA v1.0 (Infrared Data Association) port
  • Intel 82365 compatible PCMCIA interface
  • Protected WATCHDOGTM timer
  • Optimized DRAM Controller (supports two banks, up to
    8 Mbytes each)
  • Up to nine versatile, programmable chip selects
  • Glueless interface to ISA peripherals
  • Arbitration support for auxiliary processor
  • Four external DMA channels (max. transfer rate of 25
    MByte/sec @ 25 MHz) support many transfer modes
  • High performance IEEE 1284 (ECP) Bidirectional Parallel Port
  • MICROWIRE™/Access.bus synchronous serial
    interfaces
  • LCD Controller for an up to 4 grey scale supertwist
    Liquid Crystal Displays up to 480 X 320
  • Reconfigurable I/O: Up to 29 I/O pins can be used as
    general purpose bidirectional I/O lines
  • Flexible, programmable, multilevel power saving modes
    maximize power savings

The NS486SXF is a highly integrated embedded system controller incorporating an Intel486TM-class 32-bit processor, all of the necessary System Service Elements, and a set of peripheral I/O controllers tailored for embedded control systems. It is ideally suited for a wide variety of applications running in a segmented protect-mode environment.

The NS486SXF is a highly integrated embedded system controller incorporating an Intel486TM-class 32-bit processor, all of the necessary System Service Elements, and a set of peripheral I/O controllers tailored for embedded control systems. It is ideally suited for a wide variety of applications running in a segmented protect-mode environment.

다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
1개 모두 보기
유형 직함 날짜
* Data sheet NS486 SXF Optimized 32-Bit 486-Class Cntrll w/On-Chip Peri for Embedded Sys datasheet (Rev. A) 2004/05/14

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

IDE, 구성, 컴파일러 또는 디버거

CCSTUDIO Code Composer Studio integrated development environment (IDE)

Code Composer Studio is an integrated development environment (IDE) for TI's microcontrollers and processors. It is comprised of a rich suite of tools used to build, debug, analyze and optimize embedded applications. Code Composer Studio is available across Windows®, Linux® and macOS® platforms.

(...)

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

이 설계 리소스는 이러한 범주의 제품 대부분을 지원합니다.

제품 세부 정보 페이지에서 지원을 확인하십시오.

시작 다운로드 옵션
패키지 CAD 기호, 풋프린트 및 3D 모델
PQFP (NBK) 160 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상