OPA1688
- THD+N, 50 mW, 32 Ω, 1 kHz, –109 dB
- Wide supply range:
- 4.5 V to 36 V, ±2.25 V to ±18 V
- Low offset voltage: ±0.25 mV
- Low offset drift: ±0.5 µV/°C
- Gain bandwidth: 10 MHz
- Low input bias current: ±10 pA
- Low quiescent current: 1.6 mA per amplifier
- Low noise: 8 nV/√Hz
- EMI- and RFI-filtered inputs
- Input range includes negative supply
- Input range operates to positive supply
- Rail-to-rail output
- High common-mode rejection: 120 dB
- Packages:
- Industry-standard SOIC-8
- micro WSON-8
The OPA1688 36-V, single-supply, low-noise SoundPlus™ audio operational amplifier is capable of operating on supplies ranging from 4.5 V (±2.25 V) to 36 V (±18 V). This latest addition of a high-voltage audio operational amplifier in conjunction with the OPA16xx devices provide a family of bandwidth, noise, and power options to meet the needs of a wide variety of applications. The OPA1688 is available in a WSON micropackage, and offers low offset, drift, and quiescent current. This device also offers wide bandwidth, fast slew rate, and high output current drive capability.
Unlike most op amps that are specified at only one supply voltage, the OPA1688 is specified from 4.5 V to 36 V. Input signals beyond the supply rails do not cause phase reversal. The input can operate 100 mV below the negative rail and within 2 V of the top rail during normal operation. Note that this device can operate with full rail-to-rail input 100 mV beyond the top rail, but with reduced performance within 2 V of the top rail.
The OPA1688 is specified from –40°C to +85°C.
관심 가지실만한 유사 제품
비교 대상 장치보다 업그레이드된 기능을 지원하는 즉각적 대체품.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | OPA1688 36-V, Single-Supply, 10-MHz, Rail-to-Rail Output, SoundPlus™ Audio Operational Amplifier datasheet (Rev. A) | PDF | HTML | 2022. 6. 20 | |
| Application brief | Understanding Op Amp Noise in Audio Circuits | PDF | HTML | 2021. 6. 14 | ||
| 애플리케이션 노트 | HiFi Audio Circuit Design | 2017. 8. 23 | |||
| e북 | The Signal e-book: A compendium of blog posts on op amp design topics | PDF | HTML | 2017. 3. 28 | ||
| e북 | Analog Engineer’s Pocket Reference Guide Fifth Edition (Rev. D) | PDF | HTML | 2014. 9. 30 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
AMP-PDK-EVM — 증폭기 성능 개발 키트 평가 모듈
증폭기 성능 개발 키트(PDK)는 일반적인 연산 증폭기(OP 앰프) 매개 변수를 테스트할 수 있는 평가 모듈(EVM) 키트입니다. 대부분의 연산 증폭기 및 콤퍼레이터와 호환됩니다. EVM 키트는 패키지 요구 사항에 맞는 여러 소켓형 부속 카드 옵션이 있는 메인 보드를 제공하여 엔지니어가 디바이스 성능을 신속하게 평가하고 확인할 수 있습니다.
AMP-PDK-EVM 키트는 다음을 포함해 가장 널리 사용되는 5개의 업계 표준 패키지를 지원합니다.
- D(SOIC-8 및 SOIC-14)
- PW(TSSOP-14)
- DGK(VSSOP-8)
- (...)
OPA1688EVM — OPA1688 SoundPlus 오디오 연산 증폭기 평가 모듈
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
TIPD189 — 전압 출력 오디오 DAC용 헤드폰 증폭기 레퍼런스 디자인
This reference design details a high-fidelity headphone amplifier circuit suitable for portable applications, such as smartphones and tablets. It uses an operational amplifier (op amp) with low power consumption and a very small package to convert a differential output voltage to a single-ended (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOIC (D) | 8 | Ultra Librarian |
| WSON (DRG) | 8 | Ultra Librarian |